Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
3 Detergent drawer with compartments I, II, ..Door Drum Control panel Service door ect the temperature (..= cold) ct the spin speed (* depending on the model) or ....(without final laundry soaks in the last rinsing water, display panel ---) of programme after ... ramme sequence displays: h, rinse, spin, programme duration or end (-0-) proof lock ....page 5 n the washing machine door, reload laundry ....pages 4, 5 itional functions Start / Reload **If the ..symbol flashes in the display panel, the childproof lock is active ....Deactivate childproof lock, page 5. Additional functions and option buttons ....Individual settings, page 5. Press ..(Start/Reload) All buttons are sensitive and need only to be touched lightly. Press and hold the ....(Ready in) option button for an automatic run through all setting options. Removing the washing Open the washing machine door and remove the washing. If (without final spin) is active: turn the programme selector to Udpumpning (Empty) or select the spin speed. . Remove any foreign objects. Risk of rusting. . Leave the washing machine door and detergent door open so that any residual water can evaporate. Not required for Aqua-Stop models ....Refer to Installation instructions. Turn the programme selector to Fra (Off). End of programme when ... ... (Start/Reload)..flashes and -....-appears on the display panel. Note: If display panel lighting is switched off, press any button a Energy Interrupting the programme Cool washing: Select Skyl/Centrifugering (Rinse/Spin). Select Skyl/Centrifugering (Rinse/Spin) (deactivate ....(Extra rinse) button) or Udpumpning (Empty). Changing the programme if ... ... you have selected the wrong programme by mistake: Press (Start/Reload). The new programme starts from the Reloading laundry if ... ....page 5 ... Press ..(Start/Reload); both the symbols ......+ ..are displayed on the display panel. If ....is lit, the washing machine door cannot be opened. Press ..(Start/Reload). 3 4 Individual settings . . . . . . . . . Option buttons You can change the spin speed and the temperature before the selected programme starts and while it is running. The effects depend on the programme progress. ..°C (Temperature ) You can change the displayed washing temperature. The maximum selectable temperature depends on the current programme. (spin speed in rpm/ (without final spin)) You can change the displayed spin speed. The maximum selectable spin speed depends on the model and which programme is currently selected. (Ready in) When you select the programme, the relevant programme duration is displayed. You can delay the end of the programme before it begins. The ready in-time can be set in increments of one hour up to a maximum of 24 hours. Press the (Ready in) button until the required number of hours is displayed (h = hour). Choose (Start/Reload). Additional functions ....Overview of programmes, page 7 speedPerfect i For washing in a shorter time with a washing outcome comparable to that of the standard programme. Maximum load ....Overview of programmes, page 7. ecoPerfect . For saving energy with a washing performance comparable to that of the standard programme. ....(Reduced Ironing) Special spin sequence with subsequent fluffing. Gentle final spin: residual moisture in the laundry slightly increased. ....(Extra rinse) Additional rinse cycle. For areas with very soft water or for further enhancing the spin result. Childproof lock ....in the display panel You can lock the washing machine to prevent the functions you have set from being changed inadvertently. ON/OFF: after the start/end of the programme, press and hold (Start/Reload) for approx. 5 seconds. Note: The childlock can remain activated until you wish to start the next programme, even after switching off the machine. Then you can deactivate the childlock before starting the programme and activate it again as necessary once the programme has started. Note: . The s symbol..is lit: Childlock active. . The s symbol..flashes: Childlock active and then the programme selector is altered. To prevent the programme from stopping, move the programme selector back to the original programme, the s symbol is lit again. Reloading ..... + .... in the display panel Press (Start/Reload) if you want to add additional items of laundry after the programme has started. The machine checks whether reloading is possible. ..... + r are lit: reloading is possible. ... flashes: wait until ..... + r are lit. Note: do not open the door until both the ..... + r symbols are lit. ....: it is not possible to reload. Note: for safety reasons, the washing machine door remains locked when the water level and/or temperature is high, or during spinning. To continue the programme, press the (Start/Reload)..button. Energy saving mode The display panel lighting goes out after a few minutes, (Start/Reload) flashes. Press any button to switch on the lighting. (Start/Reload) To start the programme or to subsequently load additional laundry, ...
Otros modelos de este manual:Lavadoras - WM14Q450DN/12 (1.38 mb)