Iniciar sesión:
Votos - 3, Puntuación media: 3 ( )

Manual de usuario Haier, modelo HWM65-0566

Fabricar: Haier
Tamaño del archivo: 5.12 mb
Nombre del archivo: 478d7034-0466-44f0-b044-f4b575e60612.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


1 • Safety precautions...........................2 • Installation and adjustment...........................4 • Install the water inlet hose........................6 • Preparation before using..............................8 • Put in the laundries........................9 • Usage of the detergent.................. 9 • Use the operation buttons..............................10 • Close the top lid..................... 13 • Finish washing.............................. 13 • Disposal after washing..............................14 • Trouble shooting Answer to question............ 15 • Packing list specifcation........................... 16 Packing list Specification S' Water level/Water quantity (about) "n 1/12L-, 2/16U 3/20U 4/24U 5/28L> 6/32 L 7/36U 8/40U 9/43U 10/46L Water Injection pressure 0.03MPa ~ I.OMPa Rated washing / spinning capacity 6. 5kg/6. 5kg Names of the parts Meaning and description of the symbols S' Warning sign O Contents marked with that symbol are related to the safety of the product and the personal safety of the users. Please operate in strict conformity to the contents. Forbidden sign 0 Contents marked with that symbol are actions forbidden to perform. Performing of those action may result in damage of the machine or influence the personal safety of the users. __) « Safety precautions Please plug the power plug on special receptacle. Be sure to use three-plns power receptacle. Ensure that the earthing prong of the power receptacle Is earthed reliably. Use leakage protector If possible. The washing machine must be positioned so that the plug Is accessible. Be sure to pull the plug off and close the water faucet In following cases: power failure, delivering the machine, setting the machine Idle or cleaning the machine. Do not plug or pull the power plug with wet hand. • Do not bend .extend, twist, bind by force. Do not press or nip It with weight. • Keep the pin of the power plug clean, If the power plug Is polluted with dust, please wipe with dry cloth carefully. • If the power cord or the power plug Is bad, to avoid risk It Is required to have It replaced by the technicians of our special shop or the after-sale service department. In case the washing machine Is Installed on ground with carpet, do not block the ventilation hole with carpet. The ventilation Do not use water hotter than 50 "C. 0 Do not put the machine at damp place like the bathroom. Never wash it with water. Do not put wet laundries on the control panel. Do not wash water-proof laundries like the raincoat, bike covers etc. to avoid abnormal vibrations in spinning. 0 Do not let the machine share one receptacle with other electric appliances. If the plugging into the receptacle is loose, do not use the plug any more. . Trouble-shooting Answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself. Phenomena The reason How to settle The digitron displays EO. • The top lid is opened during reserve procedure. • Close the top lid. The drainage cannot work, or is too slow. The digitron displays E1. • Is the drain hose put down? • Is the drain hose blocked? • Put down the drain hose. Open and close the top lid once. •Clean the foreign material. Open and close the top lid once. It stops running in midway The digitron displays E2. • The top lid is not closed. • Close the top lid. The safety switch acts, and the spinning cannot work. The digitron displays E3. • Are the laundries put slantingly? • Is the machine slanting? • Reorder the laundries. Close the top lid. • Th machine will start running after 10 seconds of being placed horizontally. The water filling does not work, or is slow. After about 30 minutes later, the digital displays E4. • Is the water tap opened, or is there water supply failure? • Is the water inlet valve blocked? • Is the water pressure too low? • Open the water tap. Push the start/Pause button once. • Clean the water inlet valve then push the start/Pause button once. • Push the Start/Pause button once. The digitron displays E6. • The water level sensor is bad. • Please contact the after-sales service department. The machine does Not wash J Is there power failure? • Is the power plug inserted tightly? * Is the water level reached preset position? • Please use it when there's power supply. • Insert the power plug tightly. • Fill water to the preset position. not act Not spin • Is the power plug inserted tightly? • Is the top lid closed reliably? • Are the laundries set flat? • Insert the power plug tightly. • Close the top lid. • Set the laundries flat. There's abnormal sound inside the machine • Is the machine slanting? • Are the laundries put slantingly in spinning? • Are ...


Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría