Votos - 4, Puntuación media: 4 ( )

Fabricar: Desa Tamaño del archivo: 445.87 kb Nombre del archivo: Idioma del manual:

31100 Model No. 31800 Features Multipurpose tool for home, workshop, and professional use • Ergonomic design reduces hand fatigue • • Efficient torsion drive with 1/3 less effort • OPERATING INSTRUCTIONS Safety Information A WARNING Follow all safety warnings listed below and throughout manual. Improper use of this tool can cause severe injury from flying debris or firing staple into body. 1. Read and understand this manual before loading or using tool. 2. Make certain you read and understand all Warnings. 3. Only well-instructed adults should use tool. Never allow children to use tool. 4. When using tool, keep all body parts away from staple exit. 5. Never point tool at anyone. 6. Wear safety glasses to protect your eyes. 7. Lock handle on tool when loading or not in use. 8. Never use this tool where not intended. For example, don't use tool on concrete, metal, or glass. 9. Do not alter this tool in any way. 10. Always store tool • with staples removed and handle locked • out of children's reach 11. Keep this manual for reference. It is your guide to safe and proper operation of this tool. Unlocking Handle 1. Hold tool base and handle. Squeeze handle to release tension on handle lock. Slip handle lock off of handle (see Figure 1). 2. Release handle. Handle will spring free. Locking Handle 1. Hold tool firmly (see Figure 2). 2. Pull handle out to release, then push handle down (see Figure 2). Handle 2 Figure 2 Continued 3. While holding handle down, slip handle lock up over Figure 3 handle (see Figure 3). Loading Tool 1. Lock handle (see Locking Handle, page 2). 2. Turn staplegun upside down. At rear of tool, squeeze latch on end of staple channel (see Figure 4). Pull staple channel cover out of staple channel until it stops (see Figure 4). 3. Drop staples into staple channel. Make sure staple points are facing up (see Figure 4). 4. Slide staple channel cover back into staple channel until it locks into place. Staples with Figure 4 Operating Tool 1. Unlock handle if locked. 2. Grip tool firmly. Press tool against work surface (see Figure 5). 3. Depress handle firmly to fire. Do not allow tool to jump or recoil. Note: For greater driving force on harder surfaces, press thumb or palm of free hand against head of tool (see Figure 6). Figure 5 Figure 6 3 STAPLES Powerfast™ Model Nos. 31800 and 31600 Stapleguns Use: Powerfast™ Staplegun Model No. 31100 Uses: Staple Brand 1/4" 5/1611 3/811 1/211 9/1611 1/411 5/1611 Powerfast™ 36804 36805 36806 36808 36810 36114 36115 Swingline® 36804 36805 36806 36808 36810 36114 36115 Arrow® 604 605 606 608 609 404 405 Stanley® TRS 804 TRS 805 TRS 806 TRS 808 TRS 809 N/A N/A Black & Decker® 97-020 97-021 97-022 97-023 97-025 97-026 97-027 Swingline0 is a registered trademark of Swingline Incorporated. Arrow® is a registered trademark of Arrow Fastener Company. Stanley® ...

Descargar ahora

Introduzca dos números de la imagen: