Votos - 1, Puntuación media: 5
(
)
)
|
Resumen del manual
Prevent serious injury or death from falls or sliding out: • The child should at all times wear a safety harness correctly fitted and adjusted. The tray is not designed to hold the child in the chair. • It is recommended that only children capable of sitting upright unassisted use the high chair in the upright position. • Always keep child in view while in the high chair. • Never leave child unattended. • Do not use the high chair unless all components are correctly fitted and adjusted. Prevent injury from burns: Do not place this high chair near open fires or any hot surfaces. WARNING CAUTION This package contains small parts in its unassembled state. Adult assembly is required. 2 Consumer Information IMPORTANT! Place the high chair on a level, stable surface away from electrical flexes. Be sure to keep electrical flexes out of child's reach. • Please read these instructions before assembly and use of this product. • Adult assembly is required. • Tool needed for assembly: Phillips screwdriver (not included). • Product features and decorations may vary from photographs. Great Britain: Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500303. Australia: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia. Consumer Advisory Service 1300 135 312. New Zealand: 16-18 William Pickering Drive, Albany 1331, Auckland. Asia: Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. Malaysia: Diimport & Diedarkan Oleh: Mattel SEA Ptd Ltd. (993532-P) Lot 13.5, 13th Floor, Menara Lien Hoe, Persiaran Tropicana Golf Country Resort, 47410 PJ. Tel: +603-3341 9052. Mattel Europa, B.V., Gondel 1, 1186 MJ Amstelveen, Nederland. Prevent serious injury or death from falls or sliding out: • The child should at all times wear a safety harness correctly fitted and adjusted. The tray is not designed to hold the child in the chair. • It is recommended that only children capable of sitting upright unassisted use the high chair in the upright position. • Always keep child in view while in the high chair. • Never leave child unattended. • Do not use the high chair unless all components are correctly fitted and adjusted. Prevent injury from burns: Do not place this high chair near open fires or any hot surfaces. WARNING CAUTION This package contains small parts in its unassembled state. Adult assembly is required. 2 Consumer Information IMPORTANT! Place the high chair on a level, stable surface away from electrical flexes. Be sure to keep electrical flexes out of child's reach. • Please read these instructions before assembly and use of this product. • Adult assembly is required. • Tool needed for assembly: Phillips screwdriver (not included). • Product features and decorations may vary from photographs. Great Britain: Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500303. Australia: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia. Consumer Advisory Service 1300 135 312. New Zealand: 16-18 William Pickering Drive, Albany 1331, Auckland. Asia: Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China. Malaysia: Diimport & Diedarkan Oleh: Mattel SEA Ptd Ltd. (993532-P) Lot 13.5, 13th Floor, Menara Lien Hoe, Persiaran Tropicana Golf Country Resort, 47410 PJ. Tel: +603-3341 9052. Mattel Europa, B.V., Gondel 1, 1186 MJ Amstelveen, Nederland. 3 Assembled Parts 2 Bases Footrest 2 Frames Hinge Rod 2 Seat Bottom Tubes Pad Seat BottomSeat Back Base Tray Food Tray Teether Toy Note: Tighten or loosen all screws with a Phillips screw- driver. Do not over-tighten the screws. Shown Actual Size #8 x 1,9 cm Screws – 8 #10 x 2,2 cm Black Screw – 7 3 Assembled Parts 2 Bases Footrest 2 Frames Hinge Rod 2 Seat Bottom Tubes Pad Seat BottomSeat Back Base Tray Food Tray Teether Toy Note: Tighten or loosen all screws with a Phillips screw- driver. Do not over-tighten the screws. Shown Actual Size #8 x 1,9 cm Screws – 8 #10 x 2,2 cm Black Screw – 7 4 1 • Place the seat bottom face down on a flat surface. • At an angle, fit the footrest on the seat bottom, as shown. Assembly Seat Bottom Footrest • Slide a seat bottom tube through each set of plastic rings on the seat bottom. 2 Plastic Rings Seat Bottom Tubes Plastic Rings IMPORTANT! Before assembly and each use, inspect this prod- uct for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Mattel for replacement parts and instructions if needed. Never substitute parts. • Align the holes in the plastic rings and the seat bottom tubes. • Insert a #8 x 1,9 cm screw through each plastic ring and into the seat bottom tubes, as shown. Tighten the screws. This may require extra force. • Push the seat bottom tubes back and forth to be sure they are secured to the seat bottom. If the seat bottom tu...