Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
Hi-Limit Manual Reset 23 318700 1 Pipe Bracket (bent) 24 143000 1 3/4” to 1/2” Reducing Coupling 25 154004 1 Twin Speed Nut 26 802799 1 Sail Switch Box Cover and Bracket ONLY 27 122200 1 Sail Switch ONLY 28 150303 2 #4 x 3/4” Pan Head “A” Machine Screw 29 105500 1 Sail Switch Actuator Rod 30 319202 1 Sail Switch Damper (flat) 31 154002 1 1/8” Push On Fastener ** 882772 1 Steam to Gas Interface Plate...Not Illustrated * Consult factory for elevations over 2,000 feet. ** Needed when converting from steam to gas heat. Telephone: (508) 678-9000 Fax: (508) 678-9447 32 American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Direct Spark Ignition (DSI) Burner Assembly For Models Mfd. prior to April 15, 2000 Illus. No. Part No. Qty. Description 1 882483* 1 Natural Gas Burner Assembly Complete Less Orifices For Models Mfd. with Natural Gas ONLY (includes illus. nos. 1 through 5 and 7 through 32) 882484* 1 Liquid Propane (L.P.) Gas Burner Assembly Complete Less Orifices For Models Mfd. with Liquid Propane (L.P.) Gas ONLY (includes illus. nos. 1 through 5 and 7 through 32) 814832 1 Burner Box ONLY 882230** 1 ADG-758 Direct Spark Ignition (DSI) Liquid Propane (L.P.) Conversion Kit 2 141105 4 Large Burner Tube 3 141210 1 4-Port Manifold 4 323737 1 Pipe Bracket Direct Spark Ignition (DSI) Burner Assembly (continued) For Models Mfd. prior to April 15, 2000 Illus. No. Part No. Qty. Description 150300 2 #10-16 x 1/2” Hex Washer TEK Screw 6 140819** 4 #30 Burner Orifice (natural gas) 140803** 4 #49 Burner Orifice (liquid propane [L.P.] gas) 7 150103 4 #8-32 x 1/2” Phillips Round Head Machine Screw 8 153000 4 #8 Steel Burr 9 151001 4 #8-32 Pal Nut 128927 1 1/2” 24 VAC Redundant (natural gas) Gas Valve 880960 1 1/2” 24 VAC Liquid Propane (L.P.) Gas Valve Assembly 140411 1 24 VAC Gas Valve Liquid Propane (L.P.) Conversion Kit 11 318712 1 Pipe Bracket 12 150309 7 #10-16 x 1/2” Hex Head TEK Crimptite Screw 13 881367 1 1/2” Union Shutoff with Tail Piece 14 142809 1 1/2” x 29-1/8” Nipple 810030 1 Direct Spark Ignition (DSI) Module Mounting Bracket 16 128935 1 Direct Spark Ignition (DSI) Module with 3 Tries 17 809309 1 Ignitor Assembly with High Voltage (HV) Wire 18 150309 3 #10-16 x 1/2” Hex Head TEK Crimptite Screw 19 319704 1 Hi-Limit Mounting Bracket 151001 2 #8-32 Pal Nut 21 150001 2 #6-32 x 1/2” Phillips Round Head Machine Screw 22 130201 1 330. F Manual Reset Hi-Limit 23 318700 1 Pipe Bracket 24 143000 1 3/4” to 1/2” Reducing Coupling 154004 1 Twin Speed Nut 26 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw 27 802799 1 Sail Switch Cover and Bracket 28 122200 1 Sail Switch ONLY 881706 1 Sail Switch Box Assembly Complete (includes illus. nos. 26 through 32) 29 150303 2 #4 x 3/4” Pan Head “A” Machine Screw 105500 1 Sail Switch Actuator Rod 31 319202 1 Sail Switch Damper (flat) 32 154002 1 1/8” Push On Fastener * Burner orifices are not included and must be ordered separately. ** Consult factory for elevations over 2,000 feet. Telephone: (508) 678-9000 Fax: (508) 678-9447 Single-Phase (1O) Motor, Electric Relay Panel Assembly Illus. No. Part No. Qty. Description 1 132475 1 2-Pole Contactor - 24 VAC 2 150299 2 #10 x 1” Hex Washer TEK Screw 3 824828 1 RC Network with Connectors (for microprocessor controller [computer] models Only) -322809 1 Back Electrical Box Cover...Not Illustrated -150301 4 #8-18 x 7/16” Phillips Pan Head TEK Screw...Not Illustrated American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 3-Phase (3O) Motor, Electric Relay Panel Assembly Illus. No. Part No. Qty. Description 1 322812 1 Back Electrical Box Component Plate 2 132430 1 Impellor Contactor (208/230/240v, 50/60 Hz) 24 VAC 3 137015 1 RC Network (for microprocessor controller [computer] models Only) 4 150103 2 #8-32 x 3/4” Phillips Round Head Machine Screw 5 151001 2 #8-32 Pal Nut 6 153002 1 5/16” Lock Washer 7 152004 1 5/16-18 Hex Nut 8 120701 1 4-Position Terminal Block 9 150008 2 #6-32 x 1-1/4” Slotted Round Head Machine Screw 10 151000 2 #6-32 Pal Nut 11 121300 3 Open/Closed Bushing --322809 1 Back Electrical Box Cover...Not Illustrated --150301 4 #8-18 x 7/16” Phillips Pan Head TEK Screw...Not Illustrated --------- 1 Transformer (refer to Step Down Transformer Usage Listing on page 40) Telephone: (508) 678-9000 Fax: (508) 678-9447 Microprocessor Reversing Rear Control Box Assembly Illus. No. Part No. Qty. Description 1 322812 1 Back Electrical Box Component Plate 2 137060 1 Arc Suppressor (A.S.) Board 3 137013 4 Nylon Standoff 4 882386 1 Reversing Contactor (208/230/240v, 50/60 Hz) 24 VAC 5 150103 2 #8-32 x 3/4” Phillips Round Head Machine Screw 6 151001 2 #8-32 Pal Nut 7 153002 1 5/16” Lock Washer 8 152004 1 5/16-18 Hex Nut 9 132430 1 Impellor Contactor (208/230/240v, 50/60 Hz) 24 VAC 10 150103 2 #8-32 x 3/4” Phillips Round Head Machine Screw 11 151001 2 #8-32 Pal Nut 12 120701 1 4-Position Terminal Block 13 150008 2 #6-32 x 1-1/4” Slotted Round Head Machine Screw 14 151000 2 #6-32 Pal Nut 15 121300 3 Open/Closed B...