Votos - 2, Puntuación media: 3.5 ( )

Fabricar: Speed Queen Tamaño del archivo: 1.1 mb Nombre del archivo: Idioma del manual:

When all selections have been made, press the MEMORY pad. Your favorite cycle is now saved. This cycle can be stored until you either change the cycle or until there is a power outage of several seconds or longer. To recall your memory cycle, press a SELECT cycle pad twice. The light on the MEMORY pad will light up when the memory cycle is recalled. 8 To change a memory cycle, press an ON/SELECT cycle pad twice to recall the memory cycle. Change the cycle, then press the MEMORY SAVE pad. The old memory cycle will be deleted and the new cycle memorized in its place. FOR EXAMPLE: Let’s change and save a REGULAR cycle. We will change the cycle by selecting the EXTRA DRY dryness level and add the WRINKLE-FREE option. First, press the REGULAR ON/SELECT pad. Next, press the EXTRA DRY pad, and then press the WRINKLE-FREE pad. When all selections have been made, press the MEMORY SAVE pad. To recall the cycle, press the REGULAR pad twice. Wrinkle-Free (Not on all models) Press the WRINKLE-FREE pad. This will allow an extended cool-down period of up to 99 minutes at the end of the selected cycle. This cycle provides a 30 second tumble every five minutes. At the end of the 30 second tumble and if the signal was selected, it will sound for three seconds to remind you to remove the laundry from the dryer. This option is not allowed in the NO HEAT cycle. Go, Stop and Reset Go Press the GO pad to start the dryer. The dryer will not run until the GO pad is pressed. Stop Press STOP to stop the dryer at any point in the cycle. The dryer will remain at that portion of the cycle until the GO pad is again pressed. At that time, the cycle will continue where it left off. Pressing the STOP pad two times in succession will completely turn the control off. RESET • • Press RESET two times in succession to cancel any cycle or completely turn the dryer off. Customizing Programmed Cycles All automatic cycles can be customized to fit your laundering needs. First, select a cycle by pressing an ON/SELECT pad. Then, make changes in the pre-programmed cycle by using the pads to the right of the STATUS lights. The degree of dryness of the load at the end of an AUTOMATIC cycle is controlled by the VERY DRY, EXTRA DRY, NORMAL and DAMP pads. Use the VERY DRY selection when you want items to be extremely dry. Select EXTRA DRY for extra heavy, bulky items (like blue jeans or towels) that tend to hold more water than the average load. Unless another selection is made, the NORMAL dryness level will automatically be used. Select DAMP for items that you want to iron or finish drying by hanging them up. The ON/SELECT and dryness level pads work together to provide you with up to nine different drying temperatures (depending on the model). ON/SELECT | REGULAR • •MEMORY RECALL | PERM PRESS | DELJCATES | KNITS | NO HEAT STATUS CLEAN FILTER DRYING COOL DOWN WRINKLE-FREE 9...

Descargar ahora

Introduzca dos números de la imagen: