Votos - 4, Puntuación media: 4.3 ( )

Fabricar: Bernard Tamaño del archivo: 254.85 kb Nombre del archivo: 28e94390-4757-4e44-fdba-edbc9514e16a.pdf Idioma del manual:

Systems have their own specially designed transformers and are available in 120 or 230 VAC. LP-2000 HP-2010 • Star weld tip welds directly to the work piece • Built on slide hammer for one step operation • Can shrink light gauge metals • Available with primary voltage of 208/230 single phase 50/60 Hz, 20 amp or 120 volts 50/60 Hz, 30 amp • 7’ welding & 7’ ground cable leads • Shipping weight is 64 lbs. • 25’ Power cable • T-handle can be used for short controlled pulls • Lightweight, padded grip for comfortable usage • Can shrink light gauge metals • Available with primary voltage of 208/230 single phase 50/60 Hz, 20 amp or 120 volts 50/60 Hz, 30 amp • 10’ welding & 7’ ground cable leads • Shipping weight is 64 lbs • 25’ Power cable Model Item Code No. Volt Capacity Model Item Code No. Volt Capacity LP-2000 20720 208/230 HP-2010 20710 208/230 LP-2000 20820 120 HP-2010 20810 120 The LENCOSPOT® MARK II® The Mark II welder makes factory type spot welds in the shop. Simple to operate by pressing the two electrodes against the work and pressing the trigger. • Time of welds is automatic by solid state electronics • Protected control panel • On/Off indicating switch • Maximum welding capacity is 20 ga. autobody steel • Tool storage space • Easy portability with wheeled cart • Primary voltage is 208/230 single phase 50/60 Hz, 50 amp or 480 single phase 50/60 Hz, 30 amp • Shipping weight is 110 lbs. • 50’ Power cable Model Item Code No. Volt Capacity L-4000 20400 208/230 L-4480* 20480 480 *w/o power cable...

Descargar ahora

Introduzca dos números de la imagen: