Votos - 4, Puntuación media: 4.3
(
)
)
|
Resumen del manual
These MIG items include but are not limited to; Contact Tips, Nozzles, Gun Liners, Drive Rollers, Felt Wire Cleaner. In addition, this warranty does not extend to any damage caused by the untimely replacement or maintenance of any of the previously listed CONSUMABLE parts. D. Any failure that results from accident, purchaser’s abuse, neglect or failure to operate products in accordance with instructions provided in the owner’s manual(s) supplied with the product. E. Pre-delivery service, i.e. assembly and adjustment. 7. Responsibilities of Warrantor under this warranty: Repair or replace, at Warrantor’s option, products or components which have failed within duration of the warranty period. 8. Responsibilities of purchaser under this warranty: A. Deliver or ship the Campbell Hausfeld product or component to Campbell Hausfeld. Freight costs, if any, must be borne by the purchaser. B. Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s). 9. When Warrantor will perform repair or replacement under this warranty: Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability of replacement parts. This Limited Warranty gives you specific legal rights and you may also have other rights which vary from state to state. 9 Shielded Metal Arc Welder Model WS0900 Shielded Metal Arc Welder Model WS0900 1 Please provide following information: -Model number -Serial number (if any) -Part description and number as shown in parts list 8 9 12 10 10 7 13 11 1 2 3 4 5 6 Address parts correspondence to: The Campbell Group Attn: Parts Department 100 Production Drive Harrison, Ohio 45030 Replacement Parts List - Model WS0900 Ref No. Description Part Number Qty 1 Electrode holder assembly - Cord not included (Includes reference numbers 2-7) WC200000AV 1 2 Electrode holder handle (Cord not included) WC200001AV 1 3 Electrode holder body WC200002AV 1 4 Insulation cap WC200003AV 1 5 #10-24 x .5” Machine screw k 1 6 #10-24 x 7/16” Square nut k 1 7 Work clamp (Cord not included) WC100000AV 1 8 Safety decal (Right) DK404300AV 1 9 Safety decal (Left) DK404400AV 1 10 Welding cable 6 AWG (6 ft) k 2 11 Power cord 14-2 AWG (6 ft) Type SJT WC000400AJ 1 12 On/Off switch WC400100AJ 1 13 Hand wheel WC302100AJ 1 k Standard hardware item, available at local hardware or welder supply store 10 Shielded Metal Arc Welder Models WS0950, WS1000 and WS1020 Shielded Metal Arc Welder Models WS0950, WS1000 and WS1020 1 Please provide following information: -Model number 13 14 12 12 15 16 7 8 10 11 9 1 2 3 4 5 6 12 7 Address parts correspondence to: The Campbell Group Attn: Parts Department 100 Production Drive Harrison, Ohio 45030 -Serial number (if any) -Part description and number as shown in parts list MODEL WS1020 Replacement Parts List - Models WS0950, WS1000 and WS1020 Ref No. Description Part Number Qty 1 Electrode holder assembly - Cord not included (Includes reference numbers 2-7) WC200000AV 1 2 Electrode holder handle (Cord not included) WC200001AV 1 3 Electrode holder body WC200002AV 1 4 Insulation cap WC200003AV 1 5 #10-24 x .5” Machine screw k 1 6 #10-24 x 7/16” Square nut k 1 7 Work clamp (Cord not included) WC100000AV 1 Model WS1020 only WC100100AV 1 8 Handle WC300000AV 1 9 #8-36 x 1.5” Pan head screw k 1 10 Amperage window WC800000AV 1 Model WS1020 only WC800100AV 1 11 Safety decal DK404000AV 1 12 Welding cable 6 AWG (6 ft) k 2 13 Power cord 14-3 AWG (6 ft) Type SJT WC000100AJ 1 14 On/Off switch WC400000AJ 1 15 Strain relief WC102000AV 3 16 Hand wheel WC302000AJ 1 k Standard hardware item, available at local hardware or welder supply store 11 Shielded Metal Arc Welder Models WS0900, WS0950, WS1000 and WS1020 Shielded Metal Arc Welder Models WS0900, WS0950, WS1000 and WS1020 AC or Alternating Current - electric current that reverses direction periodically. Sixty cycle current travels in both directions sixty times per second. Arc Length -the distance from the end of the electrode to the point where the arc makes contact with the work surface. Base Metal - the material to be welded. Butt Joint - a joint between two members aligned approximately in the same plane. Crater - a pool, or pocket, that is formed as the arc comes in contact with the base metal. DC or Direct Current - electric current which flows only in one direction. The polarity (+ or -) determines which direction the current is flowing. DC Reverse Polarity - occurs when the electrode holder is connected to the positive pole of the welding machine. Reverse Polarity directs more heat into melting the electrode rather then the work piece. It is used on thinner material. DC Straight Polarity - occurs when the electrode holder is connected to the negative pole of the welding machine. With straight polarity more heat is directed to the work piece for better penetration on thicker material. Electrode - a coated metal wire having approximately the same com...
Otros modelos de este manual:Máquinas de soldar - WS0900 (236.72 kb)
Máquinas de soldar - WS1000 (236.72 kb)
Máquinas de soldar - WS1020 (236.72 kb)