Votos - 4, Puntuación media: 4.5
(
)
)
|
Resumen del manual
FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/ 09) Magnum ™ FT14 and FT14H 10Mb/s Media Converters Installation and User Guide Part #: 84-00134Z Rev. B Trademarks GarrettCom is a registered trademark and Magnum, Dymec, DynaStar, Personal Switch, Link-Loss-Learn, S-Ring, Convenient Switch and Converter Switch are trademarks of GarrettCom, Inc. Ethernet is a trademark of Xerox Corporation NEBS is a trademark of Telcordia Technologies UL is a registered trademark of Underwriters Laboratories www GarrettCom com . . FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/ 09) Important: The Magnum FT14 and FT14H 10 Mb/s Media Converters contains no user serviceable parts. Attempted service by unauthorized personnel shall render all warranties null and void. If problems are experienced with Magnum FT14/FT14H 10 Mb/s Media Converters products, consult Section 5, Troubleshooting, of this User Guide. Copyright © 2003 GarrettCom, Inc. All rights reserved. No part of this publication may be reproduced without prior written permission from GarrettCom, Inc. Printed in the United States of America GarrettCom, Inc. reserves the right to change specifications, performance characteristics and/or model offerings www GarrettCom com . . FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/ 09) Federal Communications Commission Radio Frequency Interference Statement This equipment generates, uses and can radiate frequency energy and if not installed and used properly, that is in strict accordance with the manufacturer's instructions, may cause interference to radio communication. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart J of Part 15 of FCC rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference, in which case the own expense will be required take whatever measures may be required to correct the interference. www GarrettCom com . . FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/ 09) Electrical Safety requirements: 1. This product is to be installed Only in Restricted Access Areas (Dedicated Equipment Rooms, Electrical Closets, or the like). 2. 48VDC products shall be installed with a readily accessible disconnect device in the building installation supply circuit to the product. 3. This product shall be provided with a maximum 10A DC Listed fuse or circuit breaker in the supply circuit when connected to a 48V centralized source. 4. The external power supply for DC units shall be Listed, Direct Plug In power unit, marked Class 2, or listed ITE Power Supply, marked LPS, which has suitably rated output voltage (i.e. 24VDC or 48VDC) and suitable rated output current. 5. Product does not contain user fuses. Any internal fuses can ONLY be replaced by GarrettCom personnel through the RMA www GarrettCom com . . FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/ 09) Contacting GarrettCom, Inc Please use the mailing address, phone and fax numbers and email address listed below: GarrettCom, Inc. 47823 Westinghouse Dr. Fremont, CA 94539 Phone (510) 438-9071 Fax (510) 438-9072 Website: Email: support@garrettcom. www GarrettCom com . . FT14 and FT14H 10Mb Media Converters Installation and User Guide (09/ 09) TABLE OF CONTENTS Page 1.0 SPECIFICATIONS ............................................................................... 1 1.1 Technical Specifications ...................................................................... 1 1.2 Summary of models and descriptions: ................................................. 7 2.0 INTRODUCTION ................................................................................. 8 2.1 Inspecting the Package and the Product ............................................... 8 2.2 Product Description ............................................................................. 9 2.3 Features and Benefits ......................................................................... 15 2.4 Applications for FT14’s and hardened FT14H’s ............................... 18 2.5 Full / Half-duplex capability .............................................................. 20 2.6 Link Pass-through, features and options. ........................................... 20 3.0 INSTALLATION ................................................................................. 23 3.1 Locating the Media Converter Unit ................................................... 23 3.2 MC14-TRAY for Rack Mounting of FT14 Series Converters ......... 25 3.3 MC14-TR+PS9 & MC14-for Rack Mounting ............... 26 3.4 DIN-Rail mounting option ................................................................. 28 3.5 Calculating Overall Segment Distance ..............................................