Votos - 4, Puntuación media: 3.8
(
)
)
|
Fotos y especificaciones Hyundai H-TV2100PF |
Resumen del manual
High temperatures can melt plastic and lead to the fire. • Do not block or cover the ventilation holes. Allow 10 cm clearance from the rear and the top of the appliance, and 5 cm from each side. • Do not place the appliance on a bed, rug or similar surface that may block the ventilation openings. • Do not place the appliance in a built-in installation such a bookcase, cabinet or airtight rack where ventilation may be impeded. • Place the appliance on a flat level surface avoiding anywhere, which may be subject to strong vibration. • The appliance should be moved with care, as the weight balance is not even. Do not place heavy objects on the appliance. • Do not allow anyone, especially children, to push anything into the slots or any other openings in the cabinet. • Do not allow children to play with the remote control. • Do not place the appliance near appliances, which may cause electromagnetic interference, such as microwave ovens or loudspeakers. • For added protection against lightning, or when left unattended and unused for an extended period of time, unplug the appliance from the power supply. • Do not leave the appliance switched on when you do not use it. • Do not operate after malfunction or damage of cord. • Do not handle the plug with wet hands. • Do not attempt to repair, adjust or replace parts in the appliance. Repair the malfunctioning appliance in the nearest service center. Colour TV features_ • Modern ergonomic design • Pure Flat screen • Child lock function • 100 program memory • Auto & manual programmable scan • Improved picture contrast • Clock • Sleep timer with 15 mins intervals up to 120 mins 3 • Real time On/Off programmable timer • 2 front speakers • Multifunctional colored Russian / English OSD • Hyperband CATV tuner • "Blue screen" function • Adjustment resume function Preparation_ Connecting to an aerial or cable television network To view television channels correctly, a signal must be received by the set from one of the following sources: - an outdoor aerial; - a cable television network. 1. Connect the aerial or network input cable to the coaxial socket on the rear of the television. 2. Insert the plug into the power supply. 3. Switch ON using the ® button on the front panel. The indicator light on the TV lights in red. NOTE: • The indicator light on the front panel TV lights in red in standby mode. • When you switch on the television the indicator light is dies out. • The power turns off approximately 30 minutes after a TV station has stopped broadcasting. Connecting the equipment to the input/outputs Location the Audio/Video connector is depending on the television model. 1. The Audio/Video connector on the side of the TV is used for Av equipment. With AV button you can select video and audio inputs. 2. With TV/AV button you can select the signal from other equipment such as VCR or CD video player. Inserting the batteries in the remote control 1. Detach the battery cover on the rear of the remote control and insert two batteries size AA according to the diagram in the battery compartment. 2. Press the ^ button on the remote control and TV screen should light up. Input and output terminals Rear of the TV (depending on the model) Cable RGB (depending on the model) ,_x ut+t+tt+tt# & \ '-' Front of the TV Cable A V (depending on the model) (depending on the model) 5 Remote control POWER ô MUTE t SYS 0-9 -/-- PROG +/- VOL+/- P.P. SLEEP 0 Power (Stand By) button Press this button to tern the TV on/off. Press any Number PROG-, PROG+ Button, picture and sound will come on within a few seconds. Mute button Press once to mute the sound, press again to return to previously set sound level. Sound system button Press this button to select the correct sound system. 5.5M_6.0M ^ 4.5M ^ 6.5M Program selection button Push the number for your desired program and the program indicator will be displayed on the screen. Press -/-- key to select one digit or two digit entry, to select program 09, use one digit entry, to select 10-99 use two digits entry. Press number key 0-99 for program selection. Press the number keys to select Teletext pages in Te...