Votos - 2, Puntuación media: 5
(
)
)
|
Resumen del manual
Always remove batteries as soon as they become weak. 2.3 EFFECTIVELY USING THE REMOTE CONTROL Point the remote toward the infra-red remote sensor on the main unit. NOTE: • If direct sunlight, incandescent light, or any other strong light sources hit the remote control sensor, the remote control may not operate properly. • If there is an obstacle between the main unit and the remote control, the remote control signal may not be received. 9 3. MENU OVERVIEW MAIN MENU SUB-MENU SUB-MENU ENTRY Û PICTURE CONT 50 BRIGHT 50 COLOR 50 TINT ± 00 SHARP 50 PIC.M DYNAMIC/PERSONAL/MILD/STANDARD FEATURE SETTING CH ADJUST FAV.CH- CALENDAR GAME B.B ON/OFF COLOR AUTO/443PAL/SECAM/443NTSC/358NTSC SOUND BG/DK LANGUAGE ENGLISH / RUSSIAN PRESENT 30 STORE TO 34 SURE ?/OK FAV. CH1 1 FAV. CH2 2 FAV. CH3 3 FAV. CH4 - FAV. CH5 - FAV. CH6 - BIOLOGICAL CLOCK 10 MAIN MENU SUB-MENU SUB-MENU ENTRY E3 TIMER l^PRESET CLOCK OFF TIMER ON TIMER POSITION POSITION BAND MANUAL SKIP FINE AUTO MEMORY 0:13 OFF/ONCE/DAILY 0:00 OFF/ONCE/DAILY 0:00 0 30 VHFL/VHFH/UHF UP/DOWN ON/OFF UP/DOWN 4. TV OPERATION 4.1 BASIC OPERATION 4.1.1 POWER ON • Press POWER button on the main unit to turn on/off the TV set. • If the standby indicator lights up, TV is in standby mode. To turn on the TV from STANDBY mode, press STANDBY button on the remote control or the PROGRAM UP /DOWN or TV/AV button on the front panel of the main unit. 4.1.2 POWER OFF • Press POWER button on the main unit to turn off the TV set. • Or press STANDBY button on the remote control to switch the TV to standby mode and the STANDBY indicator will light up. 4.1.3 SELECT MAIN MENU • By pressing the MENU button, the main menu bar will appear on the top screen, and PICTURE menu will be highlighted with yellow color, which means the pull down menu PICTURE is selected and its corresponding menu entries will be displayed underneath it. 11 • Then press VOLUME UP/DOWN button on the set or remote control, you can move the yellow cursor right or left for selecting other pull-down menus in the main menu bar. 4.1.4 SELECT MENU ENTRIES • After selecting function menu, press PROGRAM UP/DOWN button to move cursor up/down to select the menu entries (e.g. The BRIGHT of picture menu is selected if it is highlighted with red color). 4.1.5 ADJUST OPTION • Press VOLUME UP/DOWN button to adjust the data or status. E.g., The BRIGHT is adjusted to 65% as shown. • The menu will time out and disappear from the screen when you finish, or you can press the MENU button to clear the menu from the screen. 4.1.6 DISPLAY • Press DISPLAY button on remote control to display the current status of the TV set, such as the current channel No. (or AV input), the color & sound system. • Press DISPLAY button again, current time will displayed on the top screen if you set correct time in menu entry CLOCK of TIMER. 4.1.7 MUTE • Press MUTE button on remote control to temporarily turn off the sound and the word MUTE will appear on the screen. Press the Mute button once again to restore the sound. Besides, press VOLUME UP button also can restore the normal sound output. 4.2 CHANNEL PRESET_ Please preset all the active channels in your area to the TV set before you enjoy with the TV programs. 4.2.1 AUTO SEARCH All the active channels will be stored automatically from channel No. 1 and upward in order. • Activate PRESET menu. • Press the PROGRAM DOWN button to select AUTO MEMORY. • Press the OK button to start the auto searching, and then all available channels will be stored from No.1 and upward in order. Auto-searching will stop after all the frequency bands are searched, and the program of the first searched, channel 1, will show. If you want to exit auto search, just pressing the VOLUME DOWN button. 12 The menu will time out and disappear from the screen when you finish, or you can press the MENU button to clear the menu from the screen. 4.2.2 MANUAL SEARCH To preset the TV channel to your desired position number, manual searching should be used. • Activate PRESET menu. • Press the PROGRAM UP/DOWN button to select POSITION, then press the VOLUME UP/DOWN button to select the program No., e.g. 30. • Press the PROGRAM UP/DOWN button to select BAND, then press the VOLUME UP/DOWN button to select the frequency band among VHFL/ VHFH/UHF. • Press the PROGRAM UP/DOWN button to select MANUAL, then press the VOLUME UP/DOWN button to start the channel searching upward or downward from the current position of this channel and current frequency band. Note: • If the searched channel is not as your desired, you can simply restart the searching upward or downward by pressing the VOLUME UP/DOWN button. • To stop manual searching, press the VOLUME DOWN button when searching upward, or press VOLUME UP button when searching downward. • The menu will time out and disappear from the screen when you finish, or you can press the MENU button to clear the menu fro...