Votos - 2, Puntuación media: 4
(
)
)
|
Fotos y especificaciones Hyundai H-TV2901PF |
Resumen del manual
CH1 FAV. CH2 FAV. CH3 FAV. CH4 FAV. CH5 FAV. CH6 ON/OFF AUTO/443PAL/SECAM/443NTSC/358NTSC BG/DK ENGLISH / RUSSIAN ON 30 34 OK l 2 3 BIOLOGICAL CLOCK ll MAIN MENU SUB-MENU SUB-MENU ENTRY E3 TIMER l^PRESET CLOCK OFF TIMER ON TIMER POSITION POSITION BAND MANUAL SKIP FINE AUTO MEMORY 0:13 OFF/ONCE/DAILY 0:00 OFF/ONCE/DAILY 0:00 0 30 VHFL/VHFH/UHF UP/DOWN ON/OFF UP/DOWN 4. TV OPERATION 4.1 BASIC OPERATION 4.1.1 POWER ON • Press POWER button on the main unit to turn on/off the TV set. • If the standby indicator lights up, TV is in standby mode. To turn on the TV from STANDBY mode, press STANDBY button on the remote control or the PROGRAM UP /DOWN, TV/AV button on the front panel of the main unit. 4.1.2 POWER OFF • Press POWER button on the main unit to turn off the TV set. • Or press STANDBY button on the remote control to switch the TV to standby mode and the STANDBY indicator will light up. 4.1.3 SELECT MAIN MENU • By pressing the MENU button, the main menu bar will appear on the top screen, and PICTURE menu will be highlighted with yellow color, which means the pull down menu PICTURE is selected and its corresponding menu entries will be displayed underneath it. I £5 SI*™ Р1СЯ ншлк J t ■ - - m¡ 12 Then press VOLUME UP/DOWN button on the set or remote control, you can move the yellow cursor right or left for selecting other pull-down menus in the main menu bar. 4.1.4 SELECT MENU ENTRIES • After selecting function menu, press PROGRAM UP/DOWN button to move cursor up/down to select the menu entries (e.g. The BRIGHT of picture menu is selected if it is highlighted with red color). 4.1.5 ADJUST OPTION • Press VOLUME UP/DOWN button to adjust the data or status. E.g., The BRIGHT is adjusted to 65% as shown. • The menu will time out and disappear from the screen when you finish, or you can press the MENU button to clear the menu from the screen. 4.1.6 DISPLAY • Press DISPLAY button on remote control to display the current status of the TV set, such as the current channel No. (or AV input), the color & sound system. • Press DISPLAY button again, current time will displayed on the top screen if you set correct time in menu entry CLOCK of TIMER. 4.1.7 MUTE • Press MUTE button on remote control to temporarily turn off the sound and the word MUTE as shown will appear on the screen. Press the Mute button once again to restore the sound. Besides, press VOLUME UP button also can restore the normal sound output. 4.2 SOUND ADJUSTMENTS 4.2.1 BASS ENHANCEMENT • Activate SOUND menu. • Press PROGRAM UP/DOWN button to select BE OFF (or ON). • Press VOLUME UP/DOWN to turn BE on or off. • Press PROGRAM UP/DOWN button to select BE 00. • Press VOLUME UP to adjust B.E 00 to your desired level, e.g. 12, at the same time B.E will change to ON automatically if B.E is in OFF mode. NOTE: You can press B.E button on the remote controller directly to turn B.E function on or off. 13 4.2.2 BASS, TREBLE, BALANCE • Activate SOUND menu. • Press PROGRAM UP/DOWN button to select BASS. • Press VOLUME UP/DOWN to adjust for your favorable sound, e.g., adjust BASS to +30. • The same adjusting procedure is applicable to treble and balance. BASS: Decrease the low frequency (bass) by adjusting toward -50, increase the low frequency (bass) by adjusting toward +50. TREBLE: Decrease the high frequency (treble) by adjusting toward -50,increase the high frequency (treble) by adjusting toward +50. BALANCE: Adjust the sound source position from left speaker to center to right speaker as balance is adjusted from L(-50) to R(+50). 4.2.3 SOUND EFFECT • Activate SOUND menu. • Press PROGRAM UP/DOWN button to select S.E. • Press VOLUME UP/DOWN to adjust to your desired setting. NATURALNEWS “^ SPACIAL PERSONAL t 4.2.4 SURROUND SOUND • Press SURROUND button on the remote controller to adjust to your desired setting: • SURROUND OFF SIMULATED SURROUND 1 -» SURROUND 2 4.3 CHANNEL PRESET Please preset all the active channels in your area to the TV set before you enjoy with the TV programs. 4.3.1 AUTO SEARCH All the active channels will be stored automatically from channel No. 1 and upward in order. • Activate PRESET menu. • Press the PROGRAM DOWN button to select AUTO MEMORY. 14 • Press the OK button to start the auto searching, and then all available channels will be stored from No.1 and upward in order. Auto-searching will stop after all the frequency bands are searched, and the program of the first searched, channel 1, will show. If you want to exit auto search, just pressing the VOLUME DOWN button. • The menu will time out and disappear from the screen when you finish, or you can press the MENU button to clear the menu from the screen. 4.3.2 MANUAL SEARCH To preset the TV channel to your desired position number, manual searching should be used. • Activate PRESET menu. • Press the PROGRAM UP/DOWN button to select POSITION, then press the VOLUME UP/DOWN button to select the...