Votos - 2, Puntuación media: 4 ( )

Fabricar: Samsung Tamaño del archivo: 18.57 mb Nombre del archivo: Idioma del manual:

If this occurs, set the time manually. N The Antenna or cable must be connected in order to set the time automatically. Plug & Play Language : English & • Time (i'- Game Mode : Off ll BD Wise : On ¡4> Network Type Network Setup : Cable Child Lock Change PIN Parental Lock : On Clock Sleep Timer : Off Timer 1 : Inactivated Timer 2 : Inactivated Timer 3 : Inactivated U Move E Enter R Return English - 24 ■ Clock Set You can set the current time manually. N This function is only available when Clock Mode is set to Manual. N You can set the day, month, year, hour and minute directly by pressing the number buttons on the remote control. □ Sleep Timer The sleep timer automatically shuts off the TV after a preset time (30, 60, 90, 120, 150 and 180 minutes). T Press the TOOLS button to display the Tools menu. You can also set the sleep timer by selecting Tools ^ Sleep Timer. N To cancel the Sleep Timer function, select Off. □ Timer 1 / Timer 2 / Timer 3 Three different on / off timer settings can be made. You must set the clock first. ■ On Time Set the hour, minute, and activate / inactivate. (To activate timer with the setting you’ve chosen, set to Activate.) ■ Off Time Set the hour, minute, and activate / inactivate. (To activate timer with the setting you’ve chosen, set to Activate.) ■ Volume Set the desired volume level. ■ Source ^ TV / USB / TV Memory You can select the TV, TV Memory or USB device content to be played when the TV turns on automatically. Select TV, TV Memory or USB. (Make sure that an USB device is connected to your TV.) N When there is only one photo file in the USB or the TV Memory, the Slide Show will not play. ■ Antenna (when Source is set to TV) Select ATV or DTV. ■ Channel (when Source is set to TV) Select the desired channel. ■ Contents (when Source is set to USB or TV Memory) You can select a folder on the USB Device/TV Memory with music or photo files to be played when the TV turns on automatically. N If the folder name is too long, the folder can not be selected. N If you are using two of the same type USB device, be sure the folder names are different so the correct USB is read. ■ Repeat Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual. N When Manual is selected, press the ► button to select the desired day of the week. Press the ENTER E button over the desired day and the C mark will appear. N You can set the hour, minute and channel by pressing the number buttons on the remote control. N Auto Power Off When you set the timer on, the television will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by the timer. This function is only available in timer on mode and prevents overheating, which may occur if a TV is on for too long time. Timer 1 On Time | 00 00 Inactivate Off Time 00 00 Inactivate Volume Source Antenna Channel 10 TV ATV 0 Repeat Sun Mon Tue Wed Thu Fri Sat ■Once L Move U Adjust E Enter R Return English - 25 You can set up the Internet Protocol so that you can communicate with various connected networks. □ Network Connection - Cable ■ LAN Connection for a DHCP Environment The procedures to set up the network using Dynamic Host Configuration Protocol (DHCP) are described below. Since an IP address, subnet mask, gateway, and DNS are automatically allocated when DHCP is selected, you do not have to enter them manually. 1. Connect the LAN port on the rear panel of the TV and the external modem with a LAN Cable. 2. Connect the Modem port on the wall and the external modem with a Modem Cable. You can connect the LAN port and the TV directly depending on your network status. N The terminals (the position of the port and the type) of the external device may differ depending on the manufacturer. N If the IP address allocation by the DHCP server has failed, turn the external modem off, turn it on again after at least 10 seconds and then try again. N For the connections between the external modem and the Sharer (Router), refer to the owner's manual of the corresponding product. N You can connect the TV to the LAN directly without connecting it through a Sharer (Router) N You cannot use a manual-connection-type ADSL modem because it does not support DHCP. You have to use an automatic-connection-type ADSL modem. English - 26 ■ LAN Connection for Static IP Environment The procedures to set up the network using a static IP address are described below. You have to manually enter the IP address, subnet mask, gateway, and DNS that are provided by your Internet Service Provider (ISP). 1. Connect the LAN port on the rear panel of the TV and the LAN port on the wall using the LAN cable. You can connect the LAN via a Sharer (Router). N The terminals (the position of the port and the type) of the external device may differ depending on the manufacturer. N If you are using a static IP address, your ISP will inform you of the IP address, subnet mask, gateway, and DNS. Yo...

Descargar ahora

Introduzca dos números de la imagen: