Votos - 3, Puntuación media: 4.7
(
)
)
|
Resumen del manual
Some HDMI cables may not support Anynet+ functions. ^ Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status. ^ Anynet+ supports up to 8 AV devices in total. English - 40 Setting Up Anynet+ Air 28 r z' View TV Select Device > - Record > — Menu on Device > — Device Operation > Receiver :Off > Setup 0 Move Enter Setup Anynet+ (HDMI-CEC) : Off Auto Turn Off : Qn Searching Connections ^ Move Enter Return The following settings are to use Anynet+ functions. Using the Anynet+ Function 1. Press the Anynet+ button. Press the ▲ or ▼ button to select Setup, then press the ENTER/OK button. 2. Press the ENTER/OK button to select Anynet+ (HDMI-CEC), then press the ENTER/oK button. 3. Press the ▲ or ▼ button to select On, then press the ENTER/ OK button. ^ The Anynet+ (HDMI-CEC) function is enabled. ^ If you select Off, Anynet+ (HDMI-CEC) is disabled. ^ When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated. Turning an Anynet+ Device Off Automatically when the TV is Turned Off 1. Press the A or T button to select Auto Turn Off, then press the ENTER/OK button. 2. Press the ▲ or ▼ button to select On, then press the ENTER/ OK button. ^ The Auto turn off function is enabled. ^ If you select Off, the Auto turn off function is canceled. Press the EXIT button to exit. ^ The Select Device setting of the TV remote control is to be set to TV to use the Anynet+ function. If you set Auto Turn Off to On, connected external devices are also turned off when the TV is turned off. However, if the device is recording, it may not be turned off. Setup Anynet+ (HDMI-CEC) : On Auto Turn Off q. Searching Connections I S1 Enter O Return Scanning and Switching between Anynet+ Devices 1. Press the Anynet+ button. 2. Press the ▲ or ▼ button to select Select Device, then press the ENTER/OK button. 3. Press the ▲ or ▼ button to select to a particular device and press the ENTER/OK button. It is switched to the selected device. 4. If you cannot find a device you want, press the ▲ or ▼ button to select Searching Connections, then press the ENTER/OK button. The meassage Configuring Anynet+ connection... is displayed. When searching devices completes, the connected devices are listed in the Anynet+ menu. ^ Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching operation. ^ The time required to scan for devices is determined by the number of connected devices. ^ When the device scan is complete, the number of found devices is not displayed. Although the TV automatically scans devices when It Is turned on using the POWER button, devices connected when the TV is on or under a specific circumstance are not displayed in the device list. Therefore select Searching Connections menu to search devices. ^ If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the Anynet+ button. Air 28 r View TV - Select Device > —— Record » — Menu on Device > _ Device Operation > 0 Receiver :Off > Vf' Setup » Move Qi Enter Return .Setup Anynet+ (HDMI-CEC) Auto Turn Off Searching Connections O1 Enter O Return English - 41 Anynet+ Menu The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV. Anynet+ Menu Description View TV Switches from Anynet+ to TV broadcast mode. Select Device Your TV connects to the corresponding device. Record Starts a recording. (This menu works only for a device supporting recording.) Menu on Device Shows the menu of the connected device. Example. When a DVD Recorder is connected, the DVD Recorder's title menu appears. Device Operation Shows the play control menu of the connected device. Example. When a DVD Recorder is connected, the play control menu of the DVD Recorder appears. Receiver Sound is output through the receiver. Setup You can set the environment for using Anynet+. TV Remote Control Buttons Available in Anynet+ Mode Device Type Operating Status Available Buttons Anynet+ Device After switching to the device, when the menu of the corresponding device is displayed on the screen. Numeric buttons ▲ /▼/◄/►/ENTER/OK buttons Color buttons EXIT button After switching to the device, while playing a file ◄ ◄(Backward search) ► ►(Forward search) ■ (Stop) ►|| (Play/Pause) Device with built-in Tuner After switching to the device, when you are watching a TV program CH ▲/▼ button Audio Device When Receiver is activated VOL +/- button MUTE button Anyview2 When watching TV ►|| (Play/Pause) ^ The Anynet+ function only works when the remote control Is set to TV ^ The REC button works only while in the recordable state. ^ You cannot control Anynet+ devices using the buttons on the side of the TV. You can control Anynet+ devices only using the TV remote control. ^ The TV remote control may no...
Otros modelos de este manual:TV - LE32R81B (13.12 mb)
TV - LE32R81W (13.12 mb)
TV - LE32R82B (13.12 mb)
TV - LE32R83B (13.12 mb)