Votos - 1, Puntuación media: 5 ( )

Fabricar: Samsung Tamaño del archivo: 23.62 mb Nombre del archivo: Idioma del manual:

WPS will automatically configure the SSID and WPA key in either mode. • If the device is not certified, it may not connect to the TV via the "Samsung Wireless LAN Adapter." • Connection Methods: You can setup the wireless network connection on six ways. - Samsung Auto Configuration - PBC (WPS) - Auto Setup (Using the Auto Network Search function) - Manual Setup - SWL (Samsung Wireless Link) - Ad-Hoc • All of Samsung Wireless LAN Adapter shoud be connected directly to the TV's USB port. USB HUB are not supported. English 25 04 Advanced Features Advanced Features Notice The picture may appear corrupted or have static for some channels when the TV is connected to the Samsung Wireless LAN Adapter In such case, establish a connection using one of the following methods: Method 1 Method 2 Connect using the USB right angle adapter Connect via an extension cable 1. Network Setup (Samsung Auto Configuration) This function is available in APs (Access Points) that support Samsung Auto Configuration. If there is no such AP, you can connect through PBC (WPS) or manually. ^ This function is available when SWL(Samsung Wireless Link) set to Off. ^ You can check for equipment that supports Samsung Auto Configuration on How to set up using Samsung Auto Configuration Place the AP and TV next to each other and turn them on. ^ Because the booting times of applications differ, you may have to wait for approximately 2 minutes. If the LAN cable connected the WAN port of AP during Samsung Auto Configuration, you are able to complete until internet connection test. If you do not connect, Samsung Auto configuration will check only device connecting of AP (Not check internet). After 2 minutes, connect the Samsung Wireless LAN Adaptor to the TV When the Samsung Wireless LAN Adaptor is established, the pop-up window appears. As soon as a connection is established, place the AP in parallel with the Samsung Wireless LAN Adaptor giving a gap no larger than 25cm. Wait until the connection is automatically established. ^ If the connection fails, reset the AP and then try again. If Samsung Auto Configuration does not connect your TV to your AP, a pop-up window appears on the screen notifying you of the failure. Reset the AP, and then try again. If the connection fails again, choose one of the other connection setup methods, PBC (WPS), auto, or manual. After the connection is established, locate the sharer at the desired location. ^ If the AP settings have been changed or it is the first time you use the new AP after purchase, you need to set up again beginning from Step 1. English Network Setup (PBC (WPS)) How to set up using PBC (WPS) If your router has a PBC (WPS) button, follow these steps: 1. 2. 3. 4. 5. 6. Connect your TV to your LAN as described in the previous section. Turn on your TV, press the MENU button on your remote, use the Aor^ button to select Setup, and then press the ENTERE button. Use the Aor^ button to select Network in the Setup menu, and then press the ENTERE button. On the Network screen, select Network Type. Set Network Type to Wireless. Select Network Setup. The Wireless Network Setup screen appears. Network Setu | Select a network : Not Selected ► Internet Protocol Setup : Auto IP Address : ■ Subnet Mask : ■ Gateway : DNS : Auto DNS Server : □ □ □ □ i Move E Enter R Return 7. Press the Red button on your remote. 8. Press the PBC (WPS) button on your router within two minutes. Your TV player automatically acquires all the network setting values it needs and connects to your network. 9. After the network connection is set up, press the RETURN button to exit the Network Setup screen. 26 Network Setup (Auto) Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security Key. The Security Key is based on a Pass Phrase, typically a word or a series of letters and numbers of a specified length you were asked to enter when you set up security for your wireless network. If you use this method of setting up the network connection, and have a Security Key for your wireless network, you will have to enter the Pass Phrase during the setup process. How to set up automatically To set up the wireless connection automatically, follow these steps: 1. Follow Steps 1 through 6 in the "How to set up using PBC (WPS)" above. 2. Press the ▼ button to select Internet Protocol Setup, and then press the ENTERE button. Press the A or ▼ button to select Auto, and then press the ENTERE button. 3. Press the A button to go to Select a Network, and then press the ENTERE button. The Network function searches for available wireless networks. When done, it displays a list of the available networks. 4. In the list of networks, press the A or ▼ button to select a network, and then press the ENTERE button. ^ If the AP is set to Hidden (Invisible), you have to sele...

Descargar ahora

Introduzca dos números de la imagen: