Votos - 2, Puntuación media: 5 ( )

Fabricar: Samsung Tamaño del archivo: 12.61 mb Nombre del archivo: Idioma del manual:

Otherwise, just click "OK" and exit the dialog box. Display Modes Both screen position and size will vary depending on the type of PC monitor and its resolution. The resolutions in the table are recommended. (All resolutions between the supported limits are supported) >- D-Sub Input Mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H/V) IBM 640 x 350 640 x 480 720 x 400 31.469 31.469 31.469 70.086 59.940 70.087 25.175 25.175 28.322 +/- -/- -/+ 640x480 35.000 70.000 28.560 -/+ 640x480 37.861 72.809 31.500 -/- 640x480 37.500 75.000 31.500 -/- 800x600 43.750 70.000 45.500 -/+ 800x600 37.879 60.317 40.000 +/+ 800x600 48.077 72.188 50.000 +/+ 800x600 46.875 75.000 49.500 +/+ 1024x768 57.672 72.000 78.434 -/- VESA 1024x768 48.364 60.000 65.000 -/- 1024x768 56.476 70.069 75.000 -/- 1024x768 60.023 75.029 78.750 +/+ 1152x864 67.500 75.000 108.000 +/+ 1280x960 60.000 60.000 108.000 +/+ 1280x1024 63.981 60.020 108.000 +/+ 1280x1024 74.620 70.000 128.943 -/- 1280x1024 79.976 75.025 135.000 +/+ 1600x1200 75.000 60.000 162.000 +/+ 1920x1080 66.587 59.934 138.500 +/- >- HDMI/DVI Input Mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H/V) 640 x 350 31.469 70.086 25.175 + / - IBM 640 x 480 31.469 59.940 25.175 - / - 720 x 400 31.469 70.087 28.322 - / + 800x600 37.879 60.317 40.000 +/+ 1024x768 48.364 60.000 65.000 -/- VESA 1280x1024 63.981 60.020 108.000 +/+ 1920x1080 66.587 59.934 138.500 +/- >- The interlace mode is not supported. >• The set might operate abnormally if a non-standard video format is selected. >■ Separate and Composite modes are supported. SOG is not supported. English - 52 Setting the PC Öi I Coarse 1 50 Fine f^¡^—] 50 & * « ▼ Move 01 Enter Ï) Return Coarse and Fine Tuning of the Image (Image Lock): The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (coarse) and Fine-tune again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of screen. 1. Preset: Press the SOURCE button to select PC mode. 2. Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Setup", then press the ENTER/OK button. 3. Press the ▲ or ▼ button to select "PC", then press the ENTER/OK button. 4. Press the ENTER/OK button to select "Image Lock". 5. Press the ▲ or ▼ button to select "Coarse" or "Fine", then press the ENTER/OK button. 8. Press the ◄ or ► button to adjust the screen quality. Press the ENTER/OK button. 7. Press the EXIT button to exit. Changing the Image Position: Adjust the PC’s screen positioning if it does not fit the TV screen. 1. Follow the "Coarse and Fine Tuning of the Image (Image Lock)" instructions number 1 to 3. 2. Press the ▲ or ▼ button to select "Position", then press the ENTER/OK button. 3. Press the ▲ or ▼ button to adjusting the Vertical-Position. Press the ◄ or ► button to adjust the Horizontal-Position. Press the ENTER/OK button. 4. Press the EXIT button to exit. Adjusting the PC Screen Automatically (Auto Adjustment): Auto adjustment allows the PC screen of set to self-adjust to the incoming PC video signal. The values of fine, coarse and position are adjusted automatically. 1. Follow the "Coarse and Fine Tuning of the Image (Image Lock)" instructions number 1 to 3. 2. Press the ▲ or ▼ button to select "Auto Adjustment", then press the ENTER/OK button. 3. Press the EXIT button to exit. Initializing the Image Settings (Image Reset): You can replace all image settings with the factory default values. 1. Follow the "Coarse and Fine Tuning of the Image (Image Lock)" instructions number 1 to 3. 2. Press the ▲ or ▼ button to select "Image Reset", then press the ENTER/OK button. 3. Press the EXIT button to exit. TV Positio £ rTh, H % <01 $ O OMove S1 Enter 5 Return TV IPs S * Image Lock > Position > lAuto Adjustment l> 1 Image Reset ^ Move 0 Enter i) Return S % « ▼ Move B1 Enter Return Image Lock Position Auto Adjustment I Image Reset > > > English - 53 Wall-Mount Adjustment (LE4 öMSGED. LE4 0M8ZBD, LE4 GMSGED, LE4 GMS’ED, LES2MSGBD. LE52M87BD, LE4 0N86BD, LE4 6N86BD))(Sold separately! Once the wall mount is installed, the position of your TV can be easily adjustable. 1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER/OK button. 2. Press the ▲ or ▼ buttons to select “Wall-Mount Adjustment”, then press the ENTER/OK button. 3. Adjust to the desired position using the ▲,▼,◄,► buttons. 4. Press the EXIT button to exit. >- If you press an arrow button when no OSD is displayed on the TV screen, the Adjustment screen appears. >- When you turn the power off, your TV moves to the initial installation position. When you turn the power...

Descargar ahora

Introduzca dos números de la imagen: