Votos - 3, Puntuación media: 4.3 ( )

Fabricar: Samsung Tamaño del archivo: 14.28 mb Nombre del archivo: Idioma del manual:

If any items are missing, contact your dealer. Remote Control & Batteries (AA X 2ea) Mini Remote Control (2ea) & Batteries(3Vx2ea) Cleaning Cloth Power Cord RF Cable HDMI Cable (2ea) HDMI/DVI Cable D-Sub Cable PC Audio Cable Component Cables Audio Cables (3ea) (2ea) Optical Cable Owner’s Instructions Warranty card Safety Guide ^ Warranty card / Safety Guide (Not available in all locations) ^ You cannot use the cover at the back of the TV unless you use the cables supplied with the TV. However, since the cable to be connected to the Side panel is not supplied with the product, connect the Side panel using a general off-the-shelf cable. English - 2 Viewing the Control Panel ARMANI/SAM III NO ill 3 ^ The product colour and shape may vary depending on the model. O logo You can configure the ARMANI and SAMSUNG logo lights at the bottom of the TV as required. Q remote control sensor Aim the remote control towards this spot on the TV. 0 speakers English - 3 © Y Y r Viewing the Connection Panel [Side Panel Jacks] Power Input >- The product colour and shape may vary depending on the model. Whenever you connect an external device to your TV, make sure that power on the unit is turned off. When connecting an external device, match the colour of the connection terminal to the cable. PC IN [PC] / [AuDIo] - Connect to the video and audio output jack on your PC. G component in - Connect component video cables to component connector ("Pr", "Pb", "Y") on the rear of your set and the other ends to corresponding component video out connectors on the DTV or DVD. - If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD) and connect the DTV (or DVD) to component connector ("Pr", "Pb", "Y") on your set. - The Pr, Pb and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr. - Connect RCA audio cables to [R - AUDIO - L] on the rear of your set and the other ends to corresponding audio out connectors on the DTV or DVD. Q HDMI IN 1, HDMI IN 2, HDMI IN 3 - Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players) - No additional Audio connection is needed for an HDMI to HDMI connection. - When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack. ^ What is HDMI? - “High Definition Multimedia interface” allows the transmission of high definition digital video data and multiple channels of digital audio. - The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio. ^ The TV may not output sound and pictures may be displayed with abnormal colour when DVD players/Cable Boxes/Satellite receivers supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and there is no sound, connect the HDMI cable to the HDMI IN 2 jack and the audio cables to the DVI IN (HDMI2) [R-AUDIO-L] jacks on the back of the TV. If this happens, contact the company that provided the DVD player/Cable Box/Satellite receiver to confirm the HDMI version, then request a firmware update. HDMI cables that are not 1.3 may cause annoying flicker or no screen display. English - 4 DVI IN(HDMI2) [R-AuDIo-L] - DVI audio outputs for external devices. ^ Supported modes for HDMI/DVI and Component 480i 480p 576i 576p 720p 1080i 1080p HDMI/DVI 50 Hz X X X O O O O HDMI/DVI 60 Hz X O X X O O O Component O O O O O O O O ant in To view television channels correctly, a signal must be received by the set from one of the following sources: - An outdoor aerial / A cable television network / A satellite network 5 service - Connector for SERVICE only. Q common interface Slot - When not inserting "CI CARD" in some channels,"Scrambled Signal" is displayed on the screen. - The pairing information containing a telephone number, CI CARD ID, Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider. - When the channel information configuration has finished, the message "Updating Completed" is displayed, indicating that the channel list is now updated. ^ You must obtain a CI CARD from a local cable service provider. Remove the CI CARD by carefully pulling it out with your hands since dropping the CI CARD may cause damage to it. ^ Insert the CI-Card in the direction marked on it. ^ The place of the COMMON INTERFACE Slot may be different depending on its model. Q WISEUNK - Connect a USB mass storage device to view photo files (JPEG) and play audio files (MP3). O s-video or video / r-audio-l - Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder. - Connect RCA ...

Descargar ahora

Introduzca dos números de la imagen: