Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
-10- STEPS: PC Be sure both the TV and computer are set to Power off. 1.Connect VGA and audio cable. 2.Connect the power cord. 3.Power on the TV, switch to PC mode. 4.Power on the PC. This sequence is very important. -11- INSTALLATION / R L VIDEO AVOUTPUT R L VIDEO AV3INPUT INSTALLATION PC PRESET MODE(recommended resolution is 1024*768@60Hz) RESOLUTION V.Freq.(Hz) H.Freq.(KHz) 1 720*400 70 31.47 2 640*480 60 31.47 3 640*480 75 37.50 4 800*600 60 37.88 5 800*600 75 46.88 6 1024*768 60 48.36 8 1024*768 75 60.02 9 1280*1024 60 63.98 -12 INSTALLATION AV EQUIPMENT This TV provides three inputs for Composite (A/V), two inputs for S-Video, and one input for Component (Y/Pb/Pr) . You can use the input terminals on TV set rear as follows. with S-video terminal with R To audio terminal Output W AV OUTPUT AV3 INPUT To au dio outputs with terminal VIDEO EQUIPMENT VIDEO EQUIPMENT with YPbPr To audio outputs VIDEO EQUIPMENT To S-VIDEO output Yellow (video) White(audio L) Red(audio R) Y W R Y W R RWY W R output To video G B R G B R Pr Y Pb R G B HDMI Y W R From audio output VIDEO RECORDER RWY VIDEO EQUIPMENT YOutput To video YW R W R From video output HEADPHONE S-VIDEO2 VIDEO L R AV HDMI cable is no included. It can be connected to the following appliances: VCR, multi disc player, DVD, camcorder, video game or stereo system, etc..... YPbPr can support these video formats:480i,576i,480p,576p,720p,1080i. Note: AV2 and S-Video2 share the audio input channel. -13 INSTALLATION Insert Batteries Into the Remote Control 1. Remove the battery cover. 2. Place 2 AAA batteries (included) making sure the polarity (+ or -) of the batteries matches the polarity marks inside the unit. 3. Mount the battery cover. Replace the batteries when the TV set begins to show the following symptoms: Operation is unsteady or erratic. Sometimes the TV set does not function with Remote Control Unit. Remark: 1) Alkaline Battery Recommended. 2) Remove batteries when they are exhausted or if the remote control is not to be used for long time. -14 REMOTE CONTROL REMOTE CONTROL 1 ENTER 2 3 4 5 6 7 8 9 0 + CH _ + _ VOL SLEEP V-CHIP CC AUTO S.M EXIT P.M TV DISPLAY SOURCEMENU MTS/SAP MUTEPOWER ASPECT AV3 RECALL SV1 SV2 YPbPr TV Source HDMI1 HDMI2PC TV AV1 AV2 11 12 13 14 15 16 17 18 19 1 2 3 4 5 6 7 8 9 10 20 21 22 23 NOTE: 4 coloured knobs on the bottom of the remote control is optional for other version REMOTE CONTROL 1:POWER To set the TV standby or on. 2:NUMBER KEY : For direct access to program. For a 2 (3) digit program number, The second (third) digit must be entered before the dash disappears. The number, the name (and the sound mode, in analogue mode) are displayed for a few seconds. 3:MENU To display TV menu or to return to the previous menu. 4: CURSOR To move within the menu. 5: EXIT Used to exit menu. 6: VOL+/To adjust sound level. 7: P.M To switch picture mode. 8: AUTO Auto adjust in PC mode. 9: SLEEP Set time to turn off the TV. 10:V-CHIP Setting the V-CHIP level control. 11: MUTE To disable or enable the sound. 12: MTS/SAP Switch the sound stereo, SAP and mono. 13: RECALL To access the previously viewed program. 14: SOURCE Select EXT sources. 15: ENTER Confirms selection. 16: TV DISPLAY Displays/removes the program Information 17: S.M To switch sound mode. 18: CH+/CH- To access the next or previous Program. 19: ASPECT To change picture aspect . 20: CC Switch the close caption mode (cc1Cc4, Text1-text4) 21:TV/AV/SV/HDMI/YPbPr/PC Hot keys directly go to appointed source. 22. TV Source Switch TV Source between air/cable. 23. Color Keys: Reserved keys. -15 OPERATION 1. PICTURE MENU The first item of the MENU is picture menu. You can adjust picture effects here, such as contrast, brightness, etc. Press to move, press to adjust. CONTRAST 60 BR IGHTNESS 47 TINT 50 COLOR 50 SHARPNESS 26 NORMAL COLOR TEMP . 16:9 ASPECT. Note: There are three colour temperature modes which can be selected : NORMAL, WARM, COOL. 2.SOUND MENU The second item of the MENU is the sound menu. You can adjust the sound here. Press to move, press to adjust. BASS 57 TREBLE 53 BALANCE 50 AUTO VOLUME OFF SOUND -16 OPERATION 3.FUNCTION MENU The third item of the MENU is the function menu. You can adjust the settings below: 1).3D NR: adjust this item , you can see the noise reduction effect in the picture only for TV and AV source. 2).CLOSED CAPTION: switch close caption mode.. 3).PARENT CONTROL: Enter V-chip control. 4).FACTORY DEFAULT: Reset all the settings to default value. FUNCTION 3D NR CLOSED CAPTION PARENT CONTROL OFF OFF FACTORY DEFAULT 1.Parent control: put in the password, it will go into V-chip coutrol menu. Factory default password is 6666. FUNCTION CHANGE PASSWORD V-CHIP TV-RATING MPAA-RATING OFF ENGLISH-RATING NONE E FRENCH-RATING E 1).Change password:can change the current parent control password to the new password,you need to input the new password twice before it can be changed successfully. 2).V-chip:switch the V-chip ON or OFF. 3).TV-rating:it would goto TV-rating c...