Votos - 3, Puntuación media: 3.3
(
)
)
|
Resumen del manual
Press the POWER button on the TV again to end the autodemonstration. • CLOSED CAPTION When CLOSED CAPTION is highlighted in purple, press ENTER to see the following display: Closed captions are the dialogue, narration, and/or sound effects of a television program or home video which are displayed on the TV screen. Your local TV program guide denotes these programs as . DISPLAY: ON/OFF is to turn the display on or off. MODE: CAPTION is for the program you are viewing. MODE: TEXT is for additional information such as news reports or a TV program guide. This information covers the entire screen and viewing the TV program is not possible. TEXT may not be available with every program. CHANNEL 1 is used for the primary language (usually English). CHANNEL 2 is sometimes used for a second language (may vary by region). -SET UP- FUNCTIONS Use the CURSOR UP or DOWN to highlight the function to change, press ENTER to change the function, and press MENU to exit. NOTE: The word MUTE will not be displayed if the DISPLAY is ON. If you do not have sound, make sure MUTE is not set. • INITIAL SETTING Select -SET UP- and -INITIAL SETTINGS- when setting your TV up for the first time. Use the CURSOR UP / DOWN or a NUMBER from the remote to highlight the functions desired. • AIR / CABLESelect this function to change between regular VHF/UHF broadcasting (AIR) and cable (CATV1 or CATV2). Press the CURSOR buttons to highlight the correct AIR/CABLE mode and press MENU to exit. Reception channels for each mode are shown at the right. Refer to your cable or TV guide for channel identification standards. -SET UP- FUNCTIONS If certain CATV channels are poor or not possible in the CATV mode, set the AIR/ CABLE- select to CATV2. • AUTOPROGRAM This feature will automatically store active TV channels in CHANNEL MEMORY. This will allow you to skip over unused channels when using the CHANNEL UP ( ) or DOWN ( ) buttons. If the MENU button is pressed while the autoprogramming function is engaged, programming will stop. See CHANNEL MEMORY to add or erase additional channels. • CHANNEL MEMORY Use this function after AUTOPROGRAM to add or erase additional channels to the remote control CHANNEL , buttons. Add or erase additional channels while still in CHANNEL MEMORY using the CHANNEL , buttons or number buttons and then add or erase using the CURSOR , buttons. • CLOCK SET Use the same remote control buttons as shown in previous examples to display the clock setting, press MENU, 1, ENTER, 2, ENTER, 4, ENTER. Once the proper time is set (including AM or PM), press MENU to start. • CHANNEL CAPTION Use this feature to give channel names to up to 24 channels for the antenna source (ABC, PAY1, CMDY, etc.). -SET UP- FUNCTIONS To display this function, press MENU, 1, ENTER, 3, ENTER. Press the CURSOR , to select letters. Press the CURSOR , to change position. Press CHANNEL , or the number buttons to select and label additional channels. Press MENU to exit. The (*) represents a blank space. Select CANCEL to erase a CHANNEL CAPTION. • PROGRAM LIST This function allows you to view which channels are labeled in CHANNEL CAPTION (NAME), which have been added to CHANNEL MEMORY (SCAN) and which are protected by CHILD LOCK (LOCK). Press MENU, 1, ENTER, 4, ENTER to view. Press the CURSOR , to view more channels. Press MENU to exit. • TIMER SET This function will automatically turn the TV on or off. Press 1, ENTER, to select the ON TIMER. NOTE: If the clock has not been set, the display will be for clock setting as shown on page 16. -SET UP- FUNCTIONS Press the CURSOR , buttons for TIMER SET: ON or OFF and MODE: 1 SHOT (one time only) or MODE: DAILY (TV will turn on at the same time every day). Press the number buttons to select the CHANNEL the TV will tune to when the TV automatically turns on. Press the CURSOR buttons to set the ON TIME. Press ENTER after each selection. Your choice will appear in "blocked" letters. Press MENU to start. Repeat the previous steps to select and set the OFF TIMER. Remember to press ENTER after making selections with the CURSOR buttons. Press MENU to start. CAUTION: The OFF TIMER is a one time only operation. Do not try to use your TV as a deterrent when away from home by using both the ON and OFF TIMERS. The OFF TIMER function will not work until you reset it and the next ON TIME (when using DAILY MODE) will leave the TV set turned on until you press the power button on the TV or remote control to turn it off. • AUTOMATIC MESSAGE Use this function to set up two personal messages once a day or one time only. Setting the AUTOMATIC MESSAGE is the same as setting CHANNEL CAPTION and ON TIMER. Press MENU, 1, ENTER, 6, ENTER to get the AUTOMATIC MESSAGE display. (You can also use the CURSOR , to "scroll" to AUTOMATIC MESSAGE and then select the function.) Use the CURSOR , to select a letter or other character. Use the CURSOR , to change position. -SET UP- FUNCTIONS The asterisk (*) represents a blank space. When finished with your message ...