Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
See page 14 for setup instructions. 31 SQV (SuperQuickView™): Scans through memorized lists of favorite channels. 32 STOP: Stops a VCR, DVD or A/V Disc. 33 TV MENU: Displays on-screen menu system. 34 V-CHIP: Turns On or Off the V-Chip Lock. 35 VIDEO: Selects and adjusts individual video settings. 36 VOLUME: Changes sound level. Remote Control Functions: Operation .............................................................................................................................. ...................................................................................................................................................................................................................................................................................................... .......................................................................................................................................................................................................................................................................................................................................................................................... ............................................ S S 25 25 26 18 18 3 13 31 26 31 30 36 35 6 4 36 17 6 2 4 13 17 1 1 16 33 16 3 8 9 14 7 7 33 15 22 2 20 34 35 34 14 23 10 12 15 30 20 21 5 19 21 12 28 27 32 19 11 24 29 11 29 24 32 WD-52527 & WD-62527 Remote WD-52528 & WD-62528 Remote Operation Installing the Batteries: 1. Remove the remote control’s back cover by gently pressing the ribbed tab in the direction of the arrow and sliding off the cover. 2. Load the batteries, making sure the polarities (+) and (-) are correct. For best results, insert the negative (-) side first. AAA batteries are used with the WD-52527 and WD-62527. AA batteries are used with WD-52528 and WD-62528. .................................. Operation: Installing the Batteries Remote Control Functions: Care and Sleep Timer Sleep Timer Setting the Sleep Timer: 1. Press SLEEP on the remote control. 2. Each press of SLEEP increases the time displayed by 30 minutes, until the maximum value of 120 minutes is reached. 3. After 5 seconds of inactivity, the message will disappear. 4. Press SLEEP to view the remaining time before the timer turns the TV off. Canceling the Sleep Timer: 1. Press SLEEP to display the on-screen message. 2. Press SLEEP repeatedly until OFF is displayed. Note: After 5 seconds of inactivity, the message box disappears. Hint: If the remote is in the TV layer and the TV will not function, press POWER and 935 to reset the remote. Care For Best Results from the Remote Control: • Be within 20 feet of the equipment. • Do not press two or more buttons at the same time unless instructed. • Do not allow unit to get wet or become heated. • Avoid dropping on hard surfaces. • Do not use harsh chemicals to clean. Use only a soft, lightly moistened cloth. • Do not mix new and old batteries. • Do not heat, take apart or throw batteries into fire. • Use only alkaline batteries. Front Control Panel The buttons on the Front Control Panel highlighted are duplicated on the remote control. The top row of labels shows the control functions when there are no TV menus displayed on the screen. The bottom row of labels shows the control functions when the TV menus are displayed on the screen or when a special function has been activated. See “Remote Control Overview” for further details on the functions of these buttons. < DEVICEGUIDECANCELMENUENTERMENUFORMAT–CH–<> ADJUST–VOL–<> ><> POWERSYSTEMRESETLAMPSTATUSTIMER System Reset If the TV will not respond to either the remote control or the front panel controls and/or will not power Off, press the SYSTEM RESET button with a pointed item like the end point of a paperclip. The TV will turn Off and the TIMER light will flash quickly for about one minute. When the TIMER light stops flashing, you may again turn on the TV. The changes you made the last time the TV was on before you used the SYSTEM RESET button may be lost, however, the changes that were previously saved are not lost. < CH–<> ADJUST–VOL–<> ><> POWERSYSTEMRESETLAMPSTATUSTIMER A/V Reset There may be times when you wish to reset the A/V (Audio and Video) settings back to the factory defaults. To return all of the settings at once, press GUIDE and FORMAT on the front panel at the same time. To reset the defaults for individual devices, use the A/V Memory Reset selection on the Audio/Video menu. Input 3 This input can be used for convenient connection of a camcorder or other video device to the TV. Please note that if you connect to the S-VIDEO terminal, the VIDEO terminal is deactivated. The VIDEO terminal is active when there is no S-Video connection. .................................................................................................. IMPORTANT Portions of the advanced circuitry of this TV must continue to operate even when the TV is turned off. Some of these circuits therefore may need...
Otros modelos de este manual:TV - WD-52528 (6.76 mb)
TV - WD-62527 (6.76 mb)
TV - WD-62528 (6.76 mb)
TV - WD-52528 (6.76 mb)