Votos - 3, Puntuación media: 3.3
(
)
)
|
Resumen del manual
SET UP OFF Select to make black area becomes lighter. 3.5%/7.5% Select to make black area becomes thicker. • When 7.5% is chosen, the brightness is decreased by set-up cancel function for U.S. Choose OFF, when the image is darkness. (The default setting is 7.5%.) HOLD Use to adjust the image when flagging occurs near the top of the screen. USER CLAMP POSITION/ CLAMP WIDTH Use to correct solid white or solid black in the projected image. LPF Use to whether or not to enable the LPF. • Though horizontal strips may appear on the enlarged projected image, such symptom is not a malfunction. • Options marked with * become unavailable depending on the type of the input signal. • When you change the horizontal or vertical position to a large extent, noise may appear. • The adjustable range of the vertical position varies depending on the type of the input signal. Though the image may stay in the same position even when the setting value is changed, such symptom is not a malfunction. EN-23 Adjusting projected images To adjust the brightness (CONTRAST and BRIGHTNESS): You can make adjustments for the brightness of the projected image using the menu. (See Page 21 for menu setting.) 1. Display the IMAGE menu. 2. Select CONTRAST or BRIGHTNESS by pressing the { or } button. 3. Adjust the selected item by pressing the $ or % button. To cancel the menu: 4. Press the MENU button. CONTRAST Select to adjust the contrast of the image. Every time the % button is pressed, the image becomes brighter and more defined. Every time the $ button is pressed, the image becomes darker and less defined. BRIGHTNESS Every time the % button is pressed, the image becomes brighter. Every time the $ button is pressed, the image becomes darker. To adjust the color (COLOR and TINT): You can adjust the color of the projected image using the menu. (See Page 21 for menu setting.) 1. Display the IMAGE menu. 2. Select COLOR or TINT by pressing the { or } button. • COLOR is unavailable when the computer or DVI-D is selected as the input source. • TINT is available only when the NTSC signal is input. 3. Adjust the selected item by pressing the $ or % button. To cancel the menu: 4. Press the MENU button. COLOR Use to adjust the color thickness of the projected image. Every time the % button is pressed, the color becomes thicker. Every time the $ button is pressed, the color becomes lighter. • COLOR is unavailable when the computer or DVI-D is selected as the input source. TINT Use to adjust the tint of the projected image. Every time the % button is pressed, the image appears more greenish. Every time the $ button is pressed, the image appears more reddish. To sharpen or soften the projected image (SHARPNESS): You can adjust the sharpness of the projected image using the menu. (See Page 21 for menu setting.) 1. Display the IMAGE menu. 2. Select SHARPNESS by pressing the { or } button. 3. Adjust the selected item by pressing the $ or % button. To cancel the menu: 4. Press the MENU button. To enhance or weaken the white level of the projected image (CineRichColor): Use to enhance only the white level of the image. Level 10 enhances the white level most. Default is AUTO. Level 3 is automatically selected for VCR image input signals such as 480i and 720p and level 10 for computer image input signals such as XGA and SVGA. (See Page 21 for menu setting.) 1. Display the IMAGE menu. 2. Select CineRichColor by pressing the { or } button. 3. Adjust the selected item by pressing the $ or % button. To cancel the menu: 4. Press the MENU button. EN-24 ENGLISH CONTRAST R USER 0 CONTRAST B 0 BRIGHTNESS R 0 BRIGHTNESS B 0 To adjust the tone of white (COLOR TEMP.): You can select a preset color temperature (white tone) using the menu. (See Page 21 for menu setting.) 1. Display the IMAGE menu. 2. Select COLOR TEMP. by pressing the { or } button. 3. Select your desired color temperature by pressing the { or } button. To cancel the menu: 4. Press the MENU button. To adjust the tone of white (To customize the color temperature): To customize (and store) the color temperature to your preference, carry out the following procedure. (See Page 21 for menu setting.) 1. Select COLOR TEMP. in the IMAGE menu. 2. Press the $ or % button to select USER . 3. Press the ENTER button. 4. Press the { or } button to select the desired item. 5. Press the $ or % button to adjust the selected item. 6. Repeat steps 4 and 5 for optimum adjustment results. To cancel the menu: 7. Press the MENU button. To enable the stored color temperature: 1. Select USER by pressing the COLOR TEMP button on the remote control. About color temperature There are different kinds of white color. Color temperature is a way to show the differences in white. White of which temperature is low appears reddish. When the color temperature rises, white appears bluish. This projector adjusts this color temperature by changing the values of contrast blue and red. To rise the color temperature: Increase the CONTRAST B (blue) and ...