Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
Adding IEEE 1394 Devices Automatically Adding IEEE 1394 Devices Automatically Addition of IEEE 1394 devices is a special case of NetCommand setup because the devices are detected automatically. You review, edit, and delete these devices through NetCommand just as you would any other devices. When you connect an IEEE 1394 device to the TV network and power it on, the new device automatically announces its presence. This process is called device discovery and can take up to one minute. Some non-audio/video or incompatible IEEE 1394 devices, such as personal computers (PCs), may not announce their presence to the TV. The TV is not able to show these devices in the Device Selection menu. They can, however, coexist and are still available to other devices on the IEEE 1394 network that are compatible with these non-audio/video devices. Try using the Cable/SAT/DTV position of the TV remote control to see if it can control operation of IEEE 1394 cable boxes and satellite receivers. If not, use the remote control that came with the device. New 1394 Device Screen Figure 28 When your TV discovers a new IEEE 1394 device, the New 1394 Device screen appears. Select “Add” or “Do Not Add” depending on whether or not you want the device added to the Device Selection menu. If the IEEE 1394 device does not provide audio and video, you may not want to add that device to the TV’s Device Selection menu. Devices that were discovered but not added to the Device Selection menu will still be listed in the Review screen of the Edit NetCommand® menu. Figure 28. New 1394 Device screen Name for 1394 Device Screen Figure 29 If you choose to add the discovered IEEE 1394 device, the Name for 1394 Device screen appears. Enter a new name for the device or use the default name that appears automatically. The name used in this screen is the name that appears in the Device Selection menu. The DV option applies only to digital camcorders at this time and is typically detected automatically by the TV. If your camcorder uses DV formatting but the box is unchecked, add the check mark manually. To use the analog capability of some IEEE 1394 devices, such as some DVCRs and cable boxes, check the Analog Connection box. • Some DVCRs, for example, can record and play as VHS or S-VHS in addition to D-VHS. This allows you to play analog rental tapes or analog tapes from your established library or to make analog recordings from an antenna or cable system. • Some cable boxes with IEEE 1394 connections require an analog connection for on-screen guides and emergency notices. Note: You never need to check both the DV and Analog Connection check boxes for a device. Figure 29. Name for 1394 Device screen 4 NetCommand® Functions Device Selection Menu................................56 Using the Device Menu Button to Display Menus..............57 Using the GUIDE Button to Display ChannelView™ and Menus....58 NetCommand®-Controlled Recordings.....................59 Using TV Disc and A/V Discs............................60 Peer-to-Peer Connections..............................62 Using the Device Menu Button to Display Menus Device Menu If the input is a VCR or DVD, and NetCommand is set up, press DEVICE MENU once to display the transport menu for the current device (figure 3). Press DEVICE MENU a second time to display the menu for the current device source, if available. Figure 3. Transport menu When used with the TV Guide On Screen, DEVICE MENU displays or removes TV Guide’s menu information. See the TV Guide On Screen Interactive Program Guide User’s Manual for detailed information. IR Controlled Devices For a NetCommand compatible traditional IR controlled device, pressing DEVICE MENU once or twice will display the menu for that device. While the menu for the device is displayed, press ADJUST and ENTER to navigate the screen. For some NetCommand traditional devices, you will also be able to use the number buttons and other additional buttons on the TV remote. For traditional DVD players, DEVICE MENU is also known as the setup menu. CableCARD™ Menu Figure 4 PressHOMEkeytoexit Figure 4. Possible Device Menu for CableCARD When viewing a CableCARD channel, pressing DEVICE MENU will display a list of up to 8 links to applications that contain basic CableCARD information made available from your cable provider. Press ADJUST or to move through the application links. To select a link (blue text) to an application, press ADJUST or to highlight the link, then press ENTER to access the linked page. Pressing DEVICE MENU will return to the CableCARD menu screen and pressing HOME will return to TV viewing. The screen shown is an example of the type of screen that may display. Specific screen menus are sent by your cable provider. If there are technical problems with the CableCARD, an error screen will automatically display with information that may be needed by your Cable provider when you call them for assistance. Moving Through Other CableCARD Screens In addition to CableCA...
Otros modelos de este manual:TV - WD-62827 (8.21 mb)
TV - WD-62827 (8.21 mb)