Votos - 1, Puntuación media: 3
(
)
)
|
Resumen del manual
Note the distance from the screen chart. EN – 12 To operate projector power ON ENGLISH ENTER RIGHT CLICK LASER COMPUTER VIDEO ZOOM/ FOCUS MUTE VOLME AUTO POSITION MENU P in PEXPAND STILL L R AUDIO VIDEO S-VIDEO MAIN AC IN AUDIO OUT VIDEO 1 IN VIDEO 2 IN COMPUTER OUT AUDIO 2 INCOMPUTER 2 INAUDIO 1 INCOMPUTER 1 IN O I REMOTE USBRS-232C 2 , 11 AUTO POSITION button AUTO POSITION button MUTE button LAMP ZOOM/ FOCUS TEMP VIDEO ENTER COMPUTER MUTEAUTO POSITION MENU 3 , 9 , 10 3 , 9 , 10 4 4 4 5 , 76 , 8 6 , 8 1. Turn on the equipment connected to the projector. 2. Put the projector into standby mode by pressing the main power switch. The POWER indicator lights up red. 3. Turn the projector on by pressing the POWER button. The light source lamp starts warming up, eventually turning completely on. In case the light source lamp does not come on, wait for one minute before switching power on again. • If the main power switch to the unit is turned off within two minutes of turning off the light source lamp, power will not be applied to the lamp for one minute when the next time the main unit power switch is turned on. When this happens, the indicator lamp will blink for one minute. condition indicator LAMP POWER stand-by -red when light source lamp is on green green light source lamp held off temporarily -red Important: • A darkened image may be seen right after pressing the POWER button due to warming up of this projector. While warming up, no other commands can be accepted. • When the lamp indicator is blinking red, the service life of the lamp is about to end. Replace the lamp. See pages 23 and 26. 5 , 7 STILL button • The picture might not be of optimum performance in extreme hot or cold conditions. (The projector is not malfunctioning.) 4. Select the desired external input source by using the COMPUTER or VIDEO button. • The projector automatically selects the appropriate signal format. The selected signal format is displayed on the screen. • When selecting the COMPUTER input, the image may flicker. Press the $ or % button to adjust the image. • When input signal is jittering, please adjust by $ or % button also connecting with DVD player or MUSE decoder etc. • When supplying unstable signal like Still or Reverse play with VCR, “NO SIGNAL” may appear on the screen. In this case, you may avoid this issue by selecting the right color format like NTSC, PAL in OPTION menu. 5. Press the ZOOM/FOCUS button to FOCUS. “FOCUS” will appear on the display. 6. Adjust with the + or - button to get a fine picture. 7. Press the ZOOM/FOCUS button to ZOOM. “ZOOM” will appear on the display. 8. Adjust with the + or - button to get an approximate size. • Focus and zoom adjustment is possible in the normal picture mode only. In PinP or EXPAND mode, the adjustment is impossible. EN – 13 To operate projector power ON (Continue) Turning off the projector 9. Press the POWER button. The message “POWER OFF? YES : PRESS AGAIN” appears on the screen. • To exit from this mode, press any button except POWER, LASER, mouse pointer, R/L-click, STILL and VOLUME + and - buttons. 10.Press the POWER button again. The light source lamp will be turned off. Pressing the POWER button second time will shut off the light source lamp, but the exhaust fan continues to operate for 120 seconds to cool down the light source lamp and LCD panels. In this time, the lamp indicator will be turned off. 11.Turn off the main power switch. When turning off the main switch, the POWER indicator turns off. • In cases where the main power switch is accidentally turned off when either the intake/exhaust fan or the power source lamp is in operation, allow the unit to cool down for 10 minutes with the power turned off. Repeat step 3 when turning on the power source lamp. If the lamp does not turn on immediately, repeat this step two or three times. Replace the lamp if it should still fail to turn on. AUTO POSITION button When the source is selected to COMPUTER and the image is not in the right place, set the screen to the brightest display possible, then press the AUTO POSITION button on the remote control. If the image is still not in the right place. • Set screen to the brightest display as possible (e.g., full-screen display of the “Trash” window) before deploying the automatic adjustment function. • If the screen saver is running, turn off the screen saver before using the automatic adjustment button. The volume from the speaker Press the volume + or – button to change the volume from the speaker. The volume control bar will appear on the screen. 30 • The volume control bar will disappear about 10 seconds after releasing the volume buttons. • The volume buttons do not work when MENU selection bar or MENU is displayed. • The volume from the audio output terminals and PC audio output terminal are not changed. • If the high level of audio signal, for example DVD is supplied into PC AUDIO IN terminal, the speaker out may be distorted. AV mute Image and audio are temporarily eras...