Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
Operation interval is at least 2 seconds. 4. Press Power to turn on the machine before pressing CH+/CH-buttons for channel selection. Button functions Number buttons and two-digit button: There are 0 - 255 in total of 256 channels available on the RC for your option by the number buttons and two-digit button on the RC. When the channel is a one-digit figure, just press the corresponding number button. If the channel is a two-digit figure, you should press two-digit button first to show - - on the display screen before further pressing the corresponding number buttons. CH+/CH- buttons: Press CH+ button, the number of TV channel increases. Press CH- button, the number of TV channel decreases. VOL-/VOL+ buttons: Press VOL- button, the volume of TV set decreases. Press VOL+ button, the volume of TV set increases. MODE button: By pressing this button, users can select the five picture modes of Standard, Soft, Vivid, Light and Personal. POWER button: Press this button to turn on the TV set, press it again to turn off the unit. MENU button: Press this button to display the following submenus: PICTURE, OPTION, CLOCK, SYSTEM and PRESET. MUTE button: Press this button, sound disappears; press it again or press VOL+/VOL- buttons to resume normal sound. CALL button: Press this button to display the character of program currently watched. 5 TIMER button: Time setup of sleep off, it is used to set the time off within 120 minutes. LANG button: Press this button to switch between OSD menu languages. CALE button: Press this button to show Year, Month, Day and Week. Press CH+/CH- buttons to adjust the year, press VOL+/VOL- buttons to adjust the month. VIDEO button: Press this button to switch between TV/AV modes. AUTO button: Press and hold this button for 5 seconds to perform automatic channel search. RETURN button: Press this button to return to previous channel; press it again to return to current channel. HORIZONTAL button: Press this button to flip the picture horizontally; press it again to resume image. VERTICAL button: Press this button to flip the picture vertically; press it again to resume image. P.MODE: Select between two screen modes in the zoom mode: 16:9, 4:3. 6 Power Selection 1. 220V AC adapter AC adapter (refer to product tag attached to the AC adapter) supplies power to the television from 220V alternating current. 2. Automobile storage battery with 12V DC Use automobile adapter (suitable for vehicles with negative grounding) to supply power to the television from the automobile's storage battery. 3. Car Adaptor (DC 12V): The car adaptor (apply to the car with polarity connected to the ground) allows the TV to be powered by a car battery through the vehicle' s cigarette lighter. Installation and connection Installation of Base Support: Align the screw bolt on the base support with the bottom groove on hardware piece of the rear TV cover before moving upward and rotating the fixation button till fix the TV set onto the support. Connection of power supply: Align the power supply plug on AC adapter with the jack on the machine rear cover marked with DC12V. Connection of external antenna: Align one end of the external antenna cord plug with the external antenna jack on TV set and the other end to connect the external antenna head. 7 Connection of the telescopic antenna: Align the telescopic antenna plug with the external antenna jack on TV set and just plug in till its end. Earphone connection Align the earphone plug with the earphone jack on the right side panel, just plug in till its end. Note: If earphone is applied, the sound only transmits through the earphone, and no sound is available from the speaker of the TV set. Connection of AV Input 1. AV1 input: Insert the external video cord into the yellow port of the AV exchange head, the left sound track into the white port and the right sound track into the red port. Then plug the AV exchange head in AV1/IN jack. AV2 input: Insert the external video cord into the yellow port of the AV exchange head, the left sound track into the white port and the right sound track into the red port. Then plug the AV exchange head in AV2/IN jack. 8 Menu operation 1. Press MENU button on the unit or RC to select among different Menu pages, i. e. Picture, Option, Clock, System and Preset. 2. Press CH+/CH- buttons to select an item and press VOL+/VOL-buttons to change setting. Menu "Picture" In this menu you can choose following items to adjust: Contrast, Brightness, Color (for color saturation) and Sharp (for sharpness). Note: Only when displaying the picture of NTSC system, it will show the character of Tint in the Picture menu. Menu "Option" a. Language: Change OSD menu language among English, Russian, German, Spanish, Italian, and French. b. Calendar: Press CH+/CH- buttons to select Calendar and press VOL+/VOL- buttons to display a calendar. Press CH+/CH- buttons to change year and press VOL+/VOL- buttons to change month....