Votos - 4, Puntuación media: 4.5 ( )

Fabricar: Samsung Tamaño del archivo: 24.96 mb Nombre del archivo: Idioma del manual:

Press the ▲ or ▼ button to select Auto, and then press the ENTER E button. 3. Press the ▲ button to go to Select a Network, and then press the ENTERE button. The Network function searches for available wireless networks. When done, it displays a list of the available networks. 4. In the list of networks, press the ▲ or ▼ button to select a network, and then press the ENTERE button. ^ If the AP is set to Hidden (Invisible), you have to select Add Network and enter the correct Network Name (SSID) and Security Key to establish the connection. If the Security/PIN pop-up appears, go to Step 6. If the Network Connecting Screen appears, go to Step 10. Press the ▲ or ▼ button to select Security or PIN. For most home networks, you would select Security (for Security Key). The Security Screen appears. Network Setup | Select a network Not Selected ► | Internet Protocol Setup Auto IP Address El i II ■ Subnet Mask El ■ ■ ■ Gateway ■ ■ ■ ■ DNS Auto DNS Server ■ ■ ■ ■ Move E Enter R Return 7. On the Security screen, enter your network's Pass Phrase. ^ You should be able to find the Pass Phrase on one of the set up screens you used to set up your router or modem. 8. To enter the Pass Phrase, follow these general directions: - Press the number buttons on your remote to enter numbers. - Use the direction buttons on your remote to move from button to button on the Security Key screen. - Press the Red button to change case or display symbols/characters. - To a enter letter or symbol, move to the letter or symbol, and then press the ENTERE button. - To delete the last letter or number you entered, press the Green button on your remote. 9. When done, press the Blue button on your remote. The Network Connecting screen appears. 10. Wait until the connection confirmation message is displayed, and then press the ENTERE button. The Network Setup screen re-appears. 11. To test the connection, press the RETURN button to select Network Test, and then press the ENTER Q button. English 29 04 Advanced Features Advanced Features Network Setup (Ad-Hoc) Network Setup (Manual) You can connect to a mobile device without an access point through the "Samsung Wireless LAN Adapter" by using a peer to peer network. ^ This function is available when SWL(Samsung Wireless Link) is set to Off. How to connect to new Ad-hoc device 1. Follow Steps 1 through 6 in the "How to set up using PBC (WPS)" (p. 28). 2. Choose Select a network. A list of devices/networks appears. 3. While in the device list, press the Blue button on the remote. ^ The message Ad-hoc is a direct Wi-Fi connection with cell phone or PC. The existing network system may have limited functionality. Do you want to change the network connection? is displayed. 4. Input the generated Network Name (SSID) and Security Key into the device you want to connect. How to connect an existing Ad-hoc device 1. Follow Steps 1 through 6 in the "How to set up using PBC (WPS)" (p. 28). 2. Choose Select a network. The Device/Network list appears. 3. Select the device you want in the Device list. 4. If security key is required, input the security key. ^ If network doesn't operate normally, check the Network Name (SSID) and Security Key again. An incorrect Security Key may cause a malfunction. If the other methods do not work, you need to enter the Network setting values manually. Getting the Network Connection Values To get the Network connection values on most Windows computers, follow these steps: 1. Right click the Network icon on the bottom right of the screen. 2. In the pop-up menu, click Status. 3. On the dialog that appears, click the Support tab. 4. On the Support tab, click the Details button. The Network settings are displayed. How to set up manually To enter the Network connection values manually, follow these steps: 1. Follow Steps 1 through 6 in the "How to set up using PBC (WPS)" (p. 28). 2. Press the ▼ button to select Internet Protocol Setup, and then press the ENTERE button. Press the ▲ or ▼ button to select Manual, and then press the ENTERE button. 3. Press the ▼ button to go to the first entry field (IP Address). 4. Use the number buttons to enter numbers. 5. When done with each field, use the ► button to move successively to the next field. You can also use the other arrow buttons to move up, down, and back. 6. Enter the IP Address, Subnet Mask, and Gateway values. 7. Press the ▲ or ▼ button to go to DNS. 8. Press the ▼ button to go to the first DNS entry field. Enter the numbers as above. 9. When done, press the ▲ button to go to Select a Network. Select your network, and then press the ENTERE button. 10. Go to Step 4 in the "How to set up automatically" (p. 29), and follow the directions from that point on. 30 English SWL(Samsung Wireless Link) This function lets you connect a Samsung device that supports the PBC (WPS) to your TV. You can connect devices to the TV even if a sharer is not connected to the TV ^ To use...

Descargar ahora

Introduzca dos números de la imagen: