Votos - 2, Puntuación media: 3.5 ( )

Fabricar: Samsung Tamaño del archivo: 36.16 mb Nombre del archivo: Idioma del manual:

The PC/DVI AUDIO IN jack is required for audio. • If an external device such as a DVD / Blu-ray player / cable box / STB satellite receiver supporting a HDMI versions older than 1.3 is connected, the TV may operate abnormally (e.g. no screen display / no sound / annoying flicker / abnormal colour). • If there is no sound after connecting an HDMI cable, check the HDMI version of the external device. If you suspect the version is older than 1.3, contact the provider of the device to confirm the HDMI version and request an upgrade. • It is recommended you purchase an HDMI-certified cable. Otherwise, the screen may appear blank or a connection error may occur. V_J Using a Component (up to 1080p) or Audio/Video (480i only) and Scart Cable Available devices: DVD, Blu-ray player, cable box, STB satellite receiver, VCR ^ In Ext. mode, DTV Out supports MPEG SD Video and Audio only. ^ To obtain the best picture quality, the Component connection is recommended over the A/V connection. 8 English Connecting to an Audio Device Using an Optical (Digital) or Headphone Connection Available devices: digital audio system, amplifier, DVD home theatre r- un-»c Hi H g«— Iml i V. ^ DIGITAL AUDIO OUT (OPTICAL) • When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of both the TV and the system. • 5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH. • When the receiver (home theatre) is set to on, you can hear sound output from the TV's optical jack. When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver. When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the home theatre receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theatre. ^ Headphones H: You can connect your headphones to the headphones output on your set. While the headphones are connected, the sound from the built-in speakers will be disabled. • Sound function may be restricted when connecting headphones to the TV, Headphone volume and TV volume are adjusted separately. English 9 02 Connections Connections CONNECTIONS COMMON INTERFACE Slot To watch paid channels, the "CI or CI+ CARD" must be inserted. If you don't insert the "CI or CI+ CARD," some channels will display the message "Scrambled Signal". The pairing information containing a telephone number, the "CI or CI+ CARD" ID the Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider. When the configuration of channel information has finished, the message "Updating Completed” is displayed, indicating the channel list is updated. ^ NOTE • You must obtain a "CI or CI+ CARD” from a local cable service provider, • When removing the "CI or CI+ CARD”, carefully pull it out with your hands since dropping the "CI or CI+ CARD” may cause damage to it. • Insert the "CI or CI+ CARD” in the direction marked on the card. • The location of the COMMON INTERFACE slot may be different depending on the model. • "CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer, • If you have any problems, please contact a service provider, • Insert the "CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or will not be seen. Changing the Input Source Source List Use to select TV or an external input SOURCEd3 sources such as a DVD / Blu-ray player / cable box / STB satellite receiver. ■ TV / Ext. / PC / AV / Component / HDMI1/DVI / HDMI2 / HDMI3 / HDMI4 / USB ^ In the Source List, connected inputs will be highlighted. ^ Ext. and PC always stay activated. Edit Name ■ VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name the device connected to the input jacks to make your input source selection easier. ^ When a PC with a resolution of 1920 x 1080 @ 60Hz is connected to the HDMI IN 1(DVI) port, you should set to DVI PC mode under Edit Name. ^ When connecting an HDMI/DVI cable to the HDMI IN 1(DVI) port, you should set to DVI PC or DVI Devices mode under Edit Name. If an HDMI cable is connected to the HDMI IN 1(DVI) port, the audio may not work. In this case, connect to the PC/DVI AUDIO IN port. 10 English Basic Features How to Navigate Menus Before using the TV, follow the steps below to learn how to navigate the menu and selectand adjust different functions. O ENTERE / Direction button: Move the cursor and select an item. Confirm the setting. 0 RETURN button:Returns to the previous menu. © MENU button: Displaysthe main o...

Descargar ahora

Introduzca dos números de la imagen: