Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
Please see Table 4-3 page below for pin-out description. Table 4-3. The SPI/TE/Reset/backlight pin-header (J102) J102 pin LCD SPI interface signals + backlight J102-1 TFT_BL_PWM J102-2 TFT_RESET J102-3 TFT_TE (Tear-Enable signal to synchronize write) J102-4 - J102-5 TFT_CS J102-6 TFT_SCL_X (Can be swapped with J102-8) J102-7 TFT_SDO J102-8 TFT_SDI_X (Can be swapped with J102-6) J102-9 GND J102-10 V3P3 4.4 The unused pin-header (J105) This connector is not used for electrical connection on the Display Xplained module. It is only used as mechanical stabilizing to the Xplain kit. 4.5 The LCD connector (J100) The LCD connector is a 40-pin FPC connector with 0.5mm pitch. For details on signal/power connections, see the schematic diagram for the Display Xplained module. 5 Available code examples and drivers A Getting-Started training for the Display Xplained kit can be downloaded from the Atmel web site. The application note is called: AVR1913: Display Xplained Firmware – Getting Started training. Further information and drivers for Display Xplained can be downloaded as application notes, also distributed from Atmel’s web site. 6 Mounting Display Xplained module to Xplain kit The Display Xplained module will fit onto the expansion connectors on the Xplain kit. Be careful to rotate the Display Xplained module correctly to the Xplain kit. The text direction should be the same on both when rotated correctly. Also be careful to align the connectors to avoid wrong signal/power connections that might cause damage to the boards. Also be careful when the Display Xplained module is removed to avoid bending pins. Don’t use any hard tools that might cause damage to the boards. Pay attention to EMC guidelines and proper handling precautions to avoid ESD damage to the boards. AVR1909 8297A-AVR-04/10 Atmel Corporation 2325 Orchard Parkway San Jose, CA 95131 USA Tel: 1(408) 441-0311 Fax: 1(408) 487-2600 Atmel Asia Unit 1-5 & 16, 19/F BEA Tower, Millennium City 5 418 Kwun Tong Road Kwun Tong, Kowloon Hong Kong Tel: (852) 2245-6100 Fax: (852) 2722-1369 Atmel Europe Le Krebs 8, Rue Jean-Pierre Timbaud BP 309 78054 Saint-Quentin-en- Yvelines Cedex France Tel: (33) 1-30-60-70-00 Fax: (33) 1-30-60-71-11 Atmel Japan 9F, Tonetsu Shinkawa Bldg. 1-24-8 Shinkawa Chuo-ku, Tokyo 104-0033 Japan Tel: (81) 3-3523-3551 Fax: (81) 3-3523-7581 Product Contact Web Site Technical Support Sales Contact avr@atmel.com Literature Request Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDITIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life. © 2010 Atmel Corporation. All rights reserved. Atmel®, Atmel logo and combinations thereof, AVR®, AVR® logo, AVR Studio®, tinyAVR® , megaAVR® and others are the registered trademarks, XMEGATM and others are trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others 8297A-AVR-04/10 ...
Otros modelos de este manual:TV - AVR1909 (339.47 kb)
TV - AVR1909 (339.47 kb)