Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
27577 U.S.A. (919) 989-2242 n Fax (919) 989-2200 8000284 Rev. H (0254) 680444 n Fax (0254) 672299 VSAT ANTENNA/MOUNT/LNB LIMITED TWELVE (12) MONTH WARRANTY This CHANNEL MASTER® equipment is warranted to be free from defects in material and workmanship under normal use and service. CHANNEL MASTER shall repair or replace defective equipment, at no charge, or at its option, refund the purchase price, if the equipment is returned to CHANNEL MASTER not more than twelve (12) months after shipment. Removal or reinstallation of equipment and its transportation shall not be at the cost of CHANNEL MASTER except CHANNEL MASTER shall return repaired or replaced equipment freight prepaid. This Warranty shall not apply to equipment which has been repaired or altered in any way so as to affect its stability or durability, or which has been subject to misuse, negligence or accident.This Warranty does not cover equipment which has been impaired by severe weather conditions such as excessive wind, ice, storms, lightning, or other natural occurrences over which CHANNEL MASTER has no control, and this Warranty shall not apply to equipment which has been operated or installed other than in accordance with the instructions furnished by CHANNEL MASTER. Claimants under this Warranty shall present their claims along with the defective equipment to CHANNEL MASTER immediately upon failure. Non-compliance with any part of this claim procedure may invalidate this warranty in whole or in part. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER AGREEMENTS AND WARRANTIES, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. CHANNEL MASTER DOES NOT AUTHORIZE ANY PERSON TO ASSUME FOR IT THE OBLIGATIONS CONTAINED IN THIS WARRANTY AND CHANNEL MASTER NEITHER ASSUMES NOR AUTHORIZES ANY REPRESENTATIVE OR OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE EQUIPMENT DELIVERED OR PROVIDED. IN NO EVENT SHALL CHANNEL MASTER BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF USE, INTERRUPTION OF BUSINESS, OR INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND. In no event shall CHANNEL MASTER be liable for damages in an amount greater than the purchase price of the equipment. Some states do not allow limitations on how long an implied warranty lasts, or allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. DANGER!!! WATCH FOR WIRES! Installation of this product near power lines is dangerous. For your own safety, follow these important safety rules. 1. Perform as many functions as possible on the ground. 2. Watch out for overhead power lines. Check the distance to the power lines before starting installation. We recommend you stay a minimum of 6 meters (20 feet) from all power lines. 3. Do not use metal ladders. 4. Do not install antenna or mast assembly on a windy day. 5. If you start to drop antenna or mast assembly, get away from it and let it fall. 6. If any part of the antenna or mast assembly comes in contact with a power line, call your local power company. DO NOT TRY TO REMOVE IT YOURSELF! They will remove it safely. 7. Make sure that the mast assembly is properly grounded. WARNING!!! Assembling dish antennas on windy days can be dangerous. Because of the antenna surface, even slight winds create strong forces. For example, a 1.0m antenna facing a wind of 32 km/h (20 mph) can undergo forces of 269 N (60 lbs). Be prepared to safely handle these forces at unexpected moments. Do not attempt to assemble, move or mount a dish on windy days or serious, even fatal accidents may occur. Channel Master is not responsible or liable for damage or injury resulting from antenna installations. INTRODUCTION This manual covers the installation of the Channel Master 1.0m For best results in the assembly process, perform each step & 1.2m SMC antenna system with AZ/EL cap mount and in the same sequence as listed in this manual. Ku-single polarity feed. ASSEMBLY TOOLS REQUIRED The following list of tools are those required for hand assembly and installation of the antenna. 1 - Ratchet Wrench (C\,” Drive) 1 - 10mm Nut Driver 1 - 13mm Socket (C\,”Drive) 1 - 13mm Open/Box End Wrench 1 - Phillips Screwdriver 1 - Compass SITE SELECTION The first and most important consideration when choosing a prospective antenna site is whether or not the area can provide an acceptable “look angle” at the satellites. A site with a clear, unobstructed view from a suitable roof or wall facing south, southeast or southwest is required.Your antenna site must be selected in advance so that you will be able to receive the strongest signal available. To avoid obstructions, it is important to conduct an on-site survey with a portable antenna. As with any type of construction, a local permit may be required before installing an antenna. It is the owner’s responsibility to obtain any and all permits. BOLT TORQUE GRADE 8.8 (...
Otros modelos de este manual:TV - 100 (330.75 kb)