Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
• The HD INPUT-AV 4 jacks are for standard RCA-type phono plugs. Your HD receiver may use RCA or BNC output jacks. If your HD receiver comes with BNC jacks, you will need to purchase BNC-to- RCA adapters to connect the receiver to the TV. You should be able to purchase these adapters at most stores that sell electronics. Or you can call our Customer Care Center at 1-800-531-0039. • The HD INPUT-AV 4 jacks are compatible with some digital equipment having RGB outputs with “sync on green” or RGB with “separate H and V sync.” Output standards for digital equipment, however, may vary by manu- facturer. No industry standards have been established for HD television RGB signal systems, timing, synchronization, and signal strengths. If the digital equipment you want to connect to your TV offers both component video and RGB outputs, component video is the suggested connection to use. • The default color-space setting for the HD INPUT-AV 4 jacks is YPbPr. RGB is also an option. If the picture color looks grossly incorrect, try changing either the receiver’s or TV’s color space. See the receiver’s directions-for-use manual for information on setting its color space. Or see page 59 in this manual for setting the TV’s AV4 color space. • AV4 and AV5 do not function with the PIP feature. They cannot be dis- played in the PIP window, nor can the PIP window be displayed when those signal sources are being viewed on the main screen. HELPFUL HINTS BNC-to- RCA Adapter BNC Connector Adapter Fitted to Connection OR RCA Connector Connecting Accessory Devices to Your TV CONNECTING A CAMCORDER T T he side panel jacks provide a convenient way for you to connect a camcorder to your TV. The side panel jacks are recognized by your TV as AV3. You can obtain S-VIDEO quality with an S-VHS, Hi-8, or digital camcorder by connecting to the S-VIDEO input instead of the VIDEO (composite) input. To make the connections shown in this example, you will need: • an S-VIDEO cable • two cables for audio connections (standard RCA-type phono plugs). NOTE: The cables are not supplied with your TV. You should be able to buy them at most stores that sell electronics. Or you can call our Customer Care Center at 1-800-531-0039. 1 1 Connect from the S-VIDEO output on the camcorder to the S-VIDEO input in the TV’s side panel. 2 2 Connect from the AUDIO outputs on the camcorder to the side panel AUDIO L(eft) and R(ight) inputs. 3 3 Press the AV button on the remote control as many times as necessary to select the AV3 source on the TV for the viewing of materials from your camcorder. GVIDEO S-VIDEO AUDIO L R Side Jack Panel Typical Camcorder 1 S-VIDEO VIDEO AUDIO LEFT RIGHT DV 2 21 3 54 6 87 9 0 TV SWAP PIP CH DN UP ACTIVE CONTROL FREEZE SOUND MUTE SURFA/CH POWER PICTURE STATUS/ EXIT SLEEPREC • PIPPOSITION VCR ACC MENU/ SELECT VOL CH TV/VCR FORMAT SAP PROG.LISTDOLBY VAV 3 AV3 To simplify making connections, the plugs on audio cables are often color coded: red for the right channel, and white for the left channel. The jacks on your TV are likewise color coded to match the plugs. To make S-Video connections, you must use an S-Video cable. HELPFUL HINT 16 Connecting Accessory Devices to Your TV CONNECTING AND USING HEADPHONES WITH YOUR TV T T he TV’s side panel has a headphone jack for personal listening. 1 1 Insert the headphone plug into the headphone jack ; in the TV’s side panel. 2 2 Turn down the TV’s volume or press the Mute button c cc on the remote control to turn off the TV’s internal speakers. See the section below for information on adjusting headphone volume and balance. NOTE: The headphone impedance must be between 8 and 4,000 ohms. The headphone jack is stereo and 3.5 mm in size. T T he HEADPHONE controls allow you to adjust the volume and balance of the sound going to the headphones. 1 1 Press the MENU/SELECT button on the remote control to show the on-screen menu. 2 2 Press the CURSOR RING DOWN once to highlight SOUND. 3 3 Press the CURSOR RING RIGHT to enter the SOUND submenu. 4 4 Press the CURSOR RING DOWN repeatedly until HEADPHONE is highlighted. Then press the CURSOR RING RIGHT to enter the HEADPHONE submenu. 5 5 Press the CURSOR RING DOWN or UP to highlight VOLUME or BALANCE. Then press the CURSOR RING LEFT or RIGHT to adjust the control. 6 6 Press the STATUS/EXIT button to exit the menu. HELPFUL HINT The AVL, INCR. SURROUND, and BASS BOOST controls do not function with the headphones. Side Jack Panel 17 G1 PIP 2 3 54 6 87 9 0 TV SWAP PIP CH DN UP FREEZE SOUND MUTE SURFA/CH POWER PICTURE STATUS/ EXIT POSITION VCR ACC MENU/ SELECT CH TV/VCR ACTIVE CONTROL 3 12,4, 5 6 SOUND TREBLE BASS BALANCE INCR.SURROUND HEADPHONE VOLUME BALANCE PICTURE SOUND FEATURES INSTALL TREBLE BASS BALANCE AVL INCR.SURROUND TREBLE 30 BASS BALANCE AVL INCR.SURROUND SOUND SOUND HEADPHONE VOLUME 30 BALANCE SOUND HEADPHONE VOLUME BALANCE 0 SOUND MUTE PICTURE STATUS/ EXIT VOL CH 2 2 Using the Remote Control TV SWAP PIP CH DN UP FREEZE SOUND POWER PICTURE VCR ACC ACTIVE CONT...
Otros modelos de este manual:TV - 60PP9363H/17 (1.8 mb)
TV - 55PP9363H/17 (1.8 mb)
TV - 51PP9363H/17 (1.8 mb)