|
Manual de usuario Philips, modelo 14PT136B/58W
Fabricar: Philips Tamaño del archivo: 313.57 kb Nombre del archivo: 39e8f25b-1dfa-45b8-aa9b-0c51fb649011.pdf
Idioma del manual:
|
|
|
|
Enlace gratuito para este manual disponible en la parte inferior de la página
Resumen del manual
Only use good quality aerial connectors and cables. The aerial plugs should be tightly connected. o Connect the TV tightly to the mains supply socket. o Connect the aerial (indoor or outdoor) plug tightly to the nr socket on the back of the TV. Small screen TV’s ( l4"/34 cm. and 15"/36 cm. TV’s) are equipped with a high performance indoor aerial, nevertheless in some circumstances (specific regions or if surrounded by high buildings) reception problems could occur. Further improvement in reception could be obtained by: - Rotating or varying the angle of the aerial. - Using other aerial executions. - Connecting your TV to an outdoor aerial. Remote control Remove the battery cover from the remote control. Insert the batteries, as indicated on the remote control. Replace the battery cover. The batteries supplied with the remote control of your TV do not contain the heavy metals mercury and cadmium. In many countries flat batteries may not be disposed off with your household waste. Please ensure that batteries are disposed off in accordance with any local regulations. Switching TV on and off o Press © on the front of the TV. > The TV is switched on. If the screen remains dark then the TV is in Stand-by. o Pressing P —, P + or a digit button on the remote control, or — or + on the TV, switches the TV out of Stand-by. o Press ® again to switch off the TV. Stand-by By pressing (1) on the remote control you can temporarily switch the TV off. Press P — or + or a digit button on the remote control, or — or + on the TV, to switch on the TV again. Automatic switch off If after a period of 15 minutes no aerial signal is received, the TV automatically switches to Stand-by. Televisions consume energy in the stand-by mode. Energy consumption contributes to air and water pollution. We advice you to switch off your TV overnight instead of leaving it on stand-by. You save energy and the picture tube is demagnetised which maintains good picture quality. i Storing TV channels Write down the TV channels and the assigned program numbers while storing. Storing TV channels can be stopped by pressing simultaneously the two ^>0 buttons. 69 TV channels (1 to 69) can be stored on program numbers. Follow carefully steps 1, 2, 3, 4. 1. ° Press the two buttons C> and simultaneously. > INSTALLATION appears on the screen. 2. ° Press GU to start the search. > The TV automatically searches until a TV channel is found. ° If you want to continue searching for a specific TV channel then press ED again. 3. » Press P — or + to select the program number (1 to 69) where you want to store the TV channel. > The selected program number is displayed on the screen. Important You cannot store TV channels on program number 0. Program number 0 is reserved to select electronic equipment directly connected to the TV. See “Peripheral connections”. 4. o Press the two buttons and O simultaneously to store this selection. > The message STORED appears for a few seconds on the screen. Repeat steps 1, 2, 3, 4 until all the TV channels you require have been stored on program numbers. Auto Store The Auto Store function can be used to find and store all available channels quickly. Channels are stored on program numbers in the same sequence as they are found. After Auto Store is started, the TV starts searching for a TV channel. When a TV channel is found, it will be automatically stored on program number 69. Searching will start again automatically. If another TV channel is found, it will be stored on program 68, etc. o Press simultaneously the two C>0 buttons longer than 4 seconds. > INSTALLATION appears, o Press + (YES) to start the AUTOSTORE function. The Auto Store is stopped by pressing simultaneously the two C> O buttons. At the end of the Auto Store cycle the TV switches to program 69. To reorganize the sequence of the TV channels stored by the Autostore, refer to the section “Storing TV channels” following steps 1,3,4. O > x© m M © §) ® Otros modelos de este manual: TV - 14PT136B/00 (313.54 kb) Monitores - 14PT136B/20 (313.54 kb) Monitores - 14PT136B/00W (313.54 kb) TV - 14PT136B/11 (313.54 kb)
|