Votos - 5, Puntuación media: 3.8
(
)
)
|
Resumen del manual
The set switches off after a few minutes. If you forget to load a cassette, 'NO CASSETTE CANNOT RECORD'will appear. If you inserted a cassette with erase protection when you want to start a recording, the cassette will be ejected. If 'CODE ERROR' appears on the TV screen, you entered an incorrect code number or the incorrect date. Repeat the entry or end with the I standby <51 button. With 'Daily' programming, the first recording must take place within a week. If 'DAILY ERROR' appears on the TV screen, the date was incorrectly entered.'Daily' programming can only be used for recordings to be made from Mondays to Fridays inclusive. • The programmed recording will always be made at the recording speed (SP/LP) that has already been selected on the TV Combi. 7 4. SPECIAL FEATURES On Screen Display (OSD) You can switch OSD on or off. Q Press the I menu I button. 0 Select and confirm the 'FEATURES' line. / \ FEATURES * ¥ PP RECALL OIJ TIMER SLEEPTIMER 0 DISPLAY FULL CHILD LOCK OFF SET CLOCK 0 Select the 'DISPLAY' line. 0 Select one of the options indicated. 'FULL': OSD appears for a few seconds each time an operating mode is selected and then disappears. 'OFF': OSD is switched off. 'PROG': only the programm number appears. 'COUNT': only the counter appears. 0 Confirm it with the I menu 1 button. Note: With the I I button you can superimpose the actual operating mode on the TV screen. Personal Preset You can make your personal picture and volume settings here. You can call up this setting and it will be used automatically when you switch the set on. 0 Select your personal setting, (see chapter 'The TV set functions'). Press the menu buttons I ^ land I ► I button simultaneously. 0 Select and confirm the 'PP STORE' line. 0 To end, press the I menu | button. The personal setting has been stored. 0 Calling up your Preset: Press the I menu | button. 0 Select and confirm the 'FEATURES' line. 0 Select and confirm the 'PP RECALL’ line. 0 Press the I menu | button. The set will use this setting. Sleep function (switch off) You can programme your set to switch off after a predetei-mined period. 0 Press the I I button. 0 Select and confirm the 'FEATURES' line. 0 Select 'SLEEPTIMER' line. 0 With the I ^ I or the I ► I button you can determine the minutes left until switch off in 15 minutes intervals. When you set the time to '0' with the I clear I button the sleep function is switched off. 0 Press the |_.menuJ button. Switch set on function You can programme your set to switch on at a predetermined time. 0 Press the I menu | button. 0 Select and confirm the 'FEATURES' line. 0 Select and confirm the 'ON TIMER' line. 0 Determine the time you wish the set to switch on. 0 Select the 'WAKE UP' line and switch the 'on-timer' on oi off. 0 Press the I menu | button. 8 Child lock Manual channel search 0 Press the I MENU I button. 0 Select and confirm the 'FEATURES' line. 0 Select the 'CHILD LOCK' line. 0 Switch the child lock on or off. 0 Press the I menu 1 button. In certain cases the Automatic channel search may not be able to find all of the TV channels (e.g.: coded TV channels). You can then use this manual method to set the channels. 0 Switch on the set with the I STOPB | button. Press the menu buttons I land I ► I simultaneously. 0 Select and confirm the 'MANUAL STORE' line. Note: If a button is pressed with the child lock 'on', 'CHILD LOCK' appears for a few seconds in the display. * Programmed recordings are made despite the child lock and cannot be interrupted. ' MAHUALSTORE * V CHANNEL/FREQ. SEARCH C-21 FIHE TUNING PROGRAMME NR. 1 DECODER STORE 0 Select the 'SEARCH' line. 0 Press the I ► I button as often as necessary, until you have found the right TV channel. Note: * If you want to allocate a decoder, switch the decoder function on or off with the I * I or I ► I button in the 'DECODER' line. * If you want to change the automatic channel setting, select the 'FINE TUNING' line. With the I I or I ...►—I button you can vary the automatic TV channel setting. Important: This re-tuning is only necessary and useful in special cases, e.g.: when there are stripes on the picture with cable-TV systems. 0 In the 'PROGRAMME NR.' line use the I P+/~ I button to select the required programme number, e.g.: 'P 01'. 0 Select and confirm the 'STORE' line. 0 If you want to search for further TV channels, start again at step 0. To finish, press the I MENU I button twice. 9 M- Before you call an engineer If, contrary to expectation, you experience any difficulty in operating this TV Combi, please call the customer service in your country. You will find the telephone numbers in the enclosed guarantee leaflet. The set does not respond to any button being pressed: • No power supply. • Technical disturbance: disconnect from the mains for 30 seconds, then re-connect. • The power switch on the side panel is switched off. • Child lock is active. Cas...