Iniciar sesión:
Votos - 2, Puntuación media: 4 ( )

Manual de usuario Philips, modelo 14PV207

Fabricar: Philips
Tamaño del archivo: 869.44 kb
Nombre del archivo: 1512d57e-15fa-44ee-8505-c0bc94af402f.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


The main menu appears. b Select the line ’Setup’ with the P rB or AP q button and confirm with the SqC button. SETUP Parental control OFF Display MAX a Exit: « press MENU c In the line ’Parental control’ select ’ON’ with the DSr or SqC button. d Confirm with the OK button. e To end, press the MENU button. Keep the remote control in a safe place. f If you want to switch off the parental control, select ’OFF’ in line ’Parental control’. DIf a button is pressed with activated parental control, ’Parental Control active’ will appear in the display. DIf you want to eject a cassette with activated parental control, press the STOP h button several seconds. Switching the On-screen display (OSD) on or off You can switch the On Screen Display of the current operating information on or off. a Press the MENU button. The main menu appears. b Select the line ’Setup’ with the menu buttons P rB or AP q and confirm with the SqC button. c Select the line ’Display’ with the menu buttons P rB or AP q . d Select one of the options indicated with the menu buttons SqC or DSr . ’MAX’: The OSD appears for a few seconds each time an operating mode is selected and then disappears. ’MIN’: The OSD is reduced to a minimum. ’PROGR.’: The programme number is always shown. ’COUNTER’: The tape position is always shown. e Confirm with the OK button. f To end, press the MENU button. DWith the OK button you can superimpose the On Screen Display of current operating mode on the TV screen. SETUP Parental control OFF Display MAX a Exit: « press MENU TAPE Tape speed SP Repeat play OFF Jitter N. ACT. Tracking (,,,,,,=,,,,,$ Cleaning N. ACT. a Exit: « press MENU Continuous playback You can automatically play a cassette again and again. When the end of the tape or the recording has been reached, it will rewind and start again. a Press the MENU button. The main menu appears. b Select the line ’Tape’ with the menu buttons P rB or AP q . Confirm with the menu buton SqC . c Select the line ’Repeat play’ with the menu buttons P rB or AP q . d Select ’ON’ with the menu buttons DSr or SqC . If you select ’OFF’, the function will be switched off. e Confirm with the OK button. f Press the MENU button. Switch off function (SLEEP TIMER) You can programme your set to switch off after a predetermined period. a Press the TIMER k button on the remote control. b Select line ’Sleep timer’ with the P rB or AP q button and confirm with the SqC button. c Determine the time left until switch off in 15 minutes intervals using the P rB or AP q button. DYou can switch the function off with the CLEAR button on the remote control. d Confirm with the OK button. e To end, press the TIMER k button. Switch on function (WAKE-UP TIMER) You can programme your set to switch on at a predetermined time. a Press the TIMER k button on the remote control. b Select line ’Wake-up timer’ with the P rB or AP q button and confirm with the SqC button. c Select the entry field with the DSr or SqC button. d Enter the information with the P rB or AP q button or with the number buttons 0-9 . e In the line ’ON’, switch the function on or off. f Confirm with the OK button. g To end, press the TIMER k button. 9. Before you call an engineer If, contrary to expectation, you have any problems using this TV-VIDEO Combi, it may be caused by one of the reasons mentioned below. You can also call the customer service centrein your country. You will find the phone number in the enclosed guarantee leaflet. Your TV-VIDEO Combi does not respond to any button being pressed: • There is no power supply: check the power supply • A programmed recording is currently being made: cancel the programmed recording with the STANDBY m button. • Parental control is on: switch the parental control off. • Continuous playback is on: switch the continuous playback off. • There is a technical problem: switch off with the 8 power switch for 30 seconds, then switch it on again. Cassette is jammed in the TV-VIDEO Combi: • Don’t use force. Switch off with the 8 power switch for a moment. Remote control does not work: • Remote control not pointed toward the TV-VIDEO Combi: point it at the TV-VIDEO Combi. • Batteries have run out: change the batteries. No picture when you play a cassette: • There is no recording on the cassette: change the cassette. Poor picture quality when you play a cassette: • The cassette badly worn or of poor quality: use new cassette. • Tracking is not properly adjusted or the video heads are dirty: turn to chapter ’PLAYBACK’ and read the section ’Picture interference’. • You are playing a cassette with a LongPlay recording on it: Excellent picture quality is only guarateed with recordings made in StandardPlay recording speed. The TV-VIDEO Combi will not record: • The TV channel you want to record is not stored or you selected the wrong programme number: check TV channels stored. • You have loaded a cassette which cannot be recorded on: undo the erase protection on the cassette. Programmed recording does not work: ...


Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría