Votos - 3, Puntuación media: 4.3
(
)
)
|
Fotos y especificaciones NEC GT1150 |
Resumen del manual
Operation is subject to the following two conditions. not cause harmful interference, and (2) this device must accept any interference received, including cause undesired operation. U.S. Responsible Party: NEC Technologies, Inc. Address: 1250 N. Arlington Heights Road Itasca, Illinois 60143 Tel. No.: (630) 467-5000 Type of Product: LCD Projector Equipment Classification: Class B Peripheral Models: GT1150 We hereby declare that the equipment specified above conforms to the technical standards as specified in the FCC Rules. IMPORTANT INFORMATION Precautions RF Interference Please read this manual carefully before using your NEC GT1150 Projector and keep the manual handy for future reference. Your serial number is located on the bottom of your GT1150. Record it here: CAUTION To turn off main power, be sure to remove the plug from power outlet. The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible. CAUTION TO PREVENT SHOCK, DO NOT OPEN THE CABINET. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED NEC SERVICE PERSONNEL. This symbol warns the user that uninsulated voltage within the unit may be sufficient to cause electrical shock. Therefore, it is dangerous to make any kind of contact with any part inside of the unit. This symbol alerts the user that important information concerning the operation and maintenance of this unit has been provided.The information should be read carefully to avoid problems. WARNING TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. DO NOT USE THIS UNIT’S GROUNDED PLUG WITH AN EXTENSION CORD OR IN AN OUTLET UNLESS ALL THREE PRONGS CAN BE FULLY INSERTED. DO NOT OPEN THE CABINET. THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE. ALL SERVICING MUST BE DONE BY QUALIFIED NEC SERVICE PERSONNEL. DOC Compliance Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. 3. GSGV Acoustic Noise Information Ordinance: The sound pressure level is less than 70 dB (A) according to ISO 3744 or ISO 7779. WARNING The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT those specified by NEC Technologies in this manual. Failure to comply with this government regulation could void your right to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio / TV technician for help. In UK, a BS approved power cable with moulded plug has a Black (five Amps) fuse installed for use with this equipment. If a power cable is not supplied with this equipment please contact your supplier. • IBM is a registered trademark of International Business Machines Corporation. • Macintosh and PowerBook are registered trademarks of Apple Computer, Inc. • Other product and company names mentioned in this user's manual may be the trademarks of their respective holders. E – ii INFORMATIONS IMPORTANTES Precautions Veuillez lire ce manuel avec attention avant d’utiliser votre projecteur NEC GT1150 et gardez ce manuel a portee de main afin de pouvoir y recourir facilement. Votre numero de serie est situe sur le fond de votre GT1150. Reportezle ici: ATTENTION Pour couper completement l’alimentation, retirez la prise du secteur. La prise du secteur doit etre accessible et installee le plus pres possible de l’appareil. ATTENTION POUR EVITER TOUT CHOC ELECTRIQUE, N’OUVREZ PAS LE BOITIER. LES PIECES INTERNES NE SONT PAS REPARABLES PAR L’UTILISATEUR. POUR TOUTE REPARATION, ADRESSEZVOUS A UN REPARATEUR AGREE NEC. Ce symbole avertit l’utilisateur que le contact avec certaines parties non isolees a l’interieur de l’appareil risque de causer une electrocution. Il est donc dangereux de toucher quoi que ce soit a l’interieur de l’appareil. Ce symbole avertit l’utilisateur que d’importantes informations sont fournies sur le fonctionnement ou l’entretien de cet appareil. Ces informations doivent etre lues attentivement pour eviter tout probleme. AVERTISSEMENT AFIN DE...