Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
6. CH-While watching TV, press to recall the previous captured TV channel. While in main menu, press to select the first menu item for user adjustment. Inside in a function menu, press to move the selection bar down the list. 7. CH+ While watching TV, press to recall the next captured TV channel. Inside in a function menu, press to move the selection bar up the list. 8. Built-in Antenna Fully extend this telescopic antenna for best indoor or outdoor reception. Tips: when receiving weak signal in the upper channels, folding back the last section may help to improve picture stability. 9. TFT Color Screen This 4:3 screen delivers vivid pictures at 320H x 240V resolution. 10. Antenna Input This jack accepts the external monopole antenna included with your TV set 11. Headphone Jack This jack accepts a pair of stereo earbuds with a standard 3.5mm plug 12. On/Off Switch This is the main power on/off switch. Always switch to “off” if you are not using the TV set for the next few hours to conserve battery power. 13. Charge Indicator .. It will light steadily when the AC adaptor is connected and On/Off Switch is set to “OFF”. .. It will flash when On/Off Switch is set to “ON” while battery is being recharged. .. It will go off when the AC adaptor is connected and battery has been fully charged or the TV is operating on battery power. 14. DC Jack This jack accepts the included AC adaptor for normal operation and charging. 15. Speaker Grille Do not block these holes where speaker sound is emitted. They also serve as ventilation openings while TV is in operation. 16. Foldout Stand Fold out the stand if you want to keep the TV set upright. 17. Battery Compartment Cover Remove this cover to disconnect the internal Li-ion battery pack for replacement when necessary. User manual of JDTV-350, page 5 USING THE ANTENNAS USING THE ANTENNAS For normal outdoor use, fully extend the built-in antenna for best signal reception. Reception of a stable picture may be impaired if: ..• buildings or tall trees are blocking the broadcasting signals; ..• it is snowing or raining heavily; ..• you are moving along with your TV set; ..• you are operating the TV set inside a moving vehicle; ..• there are external interferences due to other RF devices nearby. Notes ..• Digital TV reception requires the TV set to be stationary while watching. ..• Keep the built-in antenna stored folded and away from any fast moving or current carrying appliances such as a working fan. If pixilation of the picture or weak reception occurs, try using the included magnetic base external antenna to improve the reception. Fully extend the antenna cable and plug the MCX connector of the external antenna into the Antenna Jack of the TV set. Then try placing the external antenna in different locations, e.g. a window, until a stable picture can be obtained. The external antenna has a magnetic base for you to attach securely to a metal (iron) surface for improved reception. GETTING STARTED When first powered on and there is no channel information stored in the memory, the TV screen will show a dialog for auto scan setup, press OK button to start auto scan mode. FUNCTION MENUS AND SETTINGS There are 5 different menus: Picture, Audio, Time, Setup and Channel. ..• Press MENU button to bring up the main menu. ..• Press VOL+ or VOL- to select a menu. ..• Press CH- button to select the first menu item and use VOL+ or VOL- button to adjust. ..• Press EXIT button to finish settings and press again to return to normal TV mode. User manual of JDTV-350, page 6 PICTURE 1. Picture mode: Standard (default), Dynamic, Soft, Personal. 2. Contrast: 0 -100 (default is 50). 3. Brightness: 0 -100 (default is 50). 4. Sharpness: 0 -100 (default is 50). 5. Tint: 0 -100 (default is 50). 6. Color: 0 -100 (default is 50). 7. Color mode: Normal, Warm, Cool (default), Personal. 8. Zoom Mode: Wide (default), Zoom, Cinema, Normal. AUDIO 1. Audio Language mode: English (default), French, Spanish. 2. Balance: 0 -100 (default is 50). TIME 1. Sleep Timer: Off (default), 5, 10, 15, 30, 45, 60, 90, 120, 180, 240. 2. Time zone: Pacific (default), Alaska, Hawaii, Atlantic, Eastern, Central, Mountain. 3. DST (Daylight Saving Time): On or Off (default). 4. Time format: 12-hour (default) or 24-hour. 5. Clock: this will display the current time using information transmitted with the receiving TV program. SETUP 1. Menu (OSD) language: OSD English (default), French, Spanish. 2. Transparent: 0%, 25%(default), 50%, 75%, 100%. 3. OSD Time Out: 5sec, 15sec (default), 30sec,45sec, 60sec. 4. Closed caption: (a) CC Mode: Select the CC display options from CC off (default), CC On, CC on mute. (b) Basic Selection: Select the CC type options from CC1 (default), CC2, CC3, CC4, Text1, Text2, Text3, Text4, Off. (c) Advanced selection: Select the CC on type options: Service1 (default), Service2, Service3, Service4, Service5, Service6, Off. (d) Option Mode: there are more options on font style, foreground/background color/opacity, ...