Votos - 3, Puntuación media: 4.7
(
)
)
|
Resumen del manual
Set the On/Off Switch of the TV to “OFF”. 2. Open the Battery Compartment Cover and carefully unplug the old battery pack from the TV unit. Gently insert the plug from the new battery pack as shown. Note that the plug is polarized and will only fit into the connector one way. The plug should never be forced into the connector. 3. Replace the battery compartment cover securely. Lithium Battery Safety Instructions Do not burn or bury batteries. Do not puncture or crush. Do not disassemble. Recycle lithium batteries. Do not dispose of in the trash. If the electrolyte in the cells should get on your skin, thoroughly wash with soap and water. If in the eyes, rinse thoroughly with cool water. Immediately seek medical attention. Use only chargers rated for lithium cells. Be sure the charger’s voltage and current settings are correct for the battery pack being charged. Charge batteries on a fireproof surface away from flammable items or liquids. Batteries should NEVER be left unattended while charging. Only adults should charge the batteries. Follow the manufacturer’s instructions for charging the product and do not charge longer than recommended. Unplug the charger when the battery is charged. Recycle Rechargeable Batteries Recycle your old rechargeable batteries at one of the many collection sites in the U.S. and Canada. To find the site nearest you, visit or call toll-free 1-877-2-RECYCLE. JDTV-1020 User Manual, page 5 TV CONTROLS TV CONTROLS 19 TV UNIT Control Function 1. TFT Color Screen This 16:9 screen delivers vivid pictures at 800H x 480V resolution. 2. Stereo Speakers They reproduce the sound of TV and FM radio broadcast. 3. Power/Charge Indicator • It will light steadily when ac adaptor is connected and On/Off Switch is set to “OFF”. • It will flash when On/Off Switch is set to “ON” while battery is being recharged. • It will go off when ac adaptor is connected and battery has been full charged or the TV is working on battery power. 4. MENU While in TV mode, press to bring up the main function menu. Inside a function menu, press to end setting mode. Press again to return to TV mode. 5. CH- / • While watching TV, press to recall the previous captured TV channel. While in main menu, press to select the first menu item for user adjustment. Inside in a function menu, press to move the selection bar down the list. 6. CH+ / • While watching TV, press to recall the next captured TV channel. Inside in a function menu, press to move the selection bar up the list. 7. AUTO/OK While in TV mode, press to enter the auto scan menu. Press to choose a menu item or confirm a setting. 8. VOL- / • While in TV or FM radio, press to decrease the volume output. While in main menu, press to select previous function menu, e.g. Audio. Inside in a function menu, press to change the setting of the selected menu item. 9. VOL+ / • While in TV or FM radio, press to increase the volume output. While in main menu, press to select next function menu, e.g. Audio. Inside in a function menu, press to change the setting of the selected menu item. 10. TV/FM Press to toggle between TV and FM radio modes. 11. Remote Sensor It receives IR control signals from the remote. 12. ANT. IN (Antenna Input) This jack accepts the external rotary telescopic or magnetic base monopole antenna included with your TV set. 13. Headphone Jack This jack accepts a pair of stereo earbuds with a standard 3.5mm plug. 14. On/Off Switch This is the main power on/off switch. Always switch to “off” if you are not using the TV set for the next few hours to conserve battery power. 15. DC Jack This jack accepts the included AC adaptor for normal operation and charging. JDTV-1020 User Manual, page 6 16. Antenna Holder Convenient place to store the removable telescopic antenna when not in use. 17. Battery Compartment Cover Remove this cover to disconnect the internal Li-ion battery pack for replacement when necessary. 18. Foldout Stand Fold out the stand if you want to keep the TV set upright. 19. Detachable TV Stand Attach the adjustable stand to the bracket located on the back of the TV to keep the TV set upright. The TV angle can be adjusted for best viewing angle. REMOTE CONTROL Control Function 1. MUTE Press to cut off the audio output from the TV or FM radio instantly. 2. PICTURE Press to select picture effect from dynamic, soft, personal or standard options. 3. MENU While in TV mode, press to bring up the main function menu. Inside a function menu, press to end setting mode. Press again to return to TV mode. 4. SLEEP Press to select sleep Time from 5, 10, 15, 30, 45, 60, 90, 120, 180, 240 mins. 5. Numeric Keys (0-9) Use this to directly enter TV channel no. after pressing -button. 6. . PREV Press to return to previous selected channel. 7. VOLUME- While watching TV, press to decrease the volume output. While in main menu, press to select previous function menu, e.g. Audio. Inside in a function menu, press to change the setting of the selected menu it...