Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
__ AUTO PROG^ MANUALPROGX Î^cl ON MUTE Lj" ■ 0FF . . ESPANOL FRANÇAIS Set Time — Clock (when set) will display on screen at initial “Turn On", after a channel change and when pressing the RECALL button The time must be set first in order to operate the Program ON/OFF Timer 1 Press the ACTION button to display the Main Menu 2 Press the CH UP/DOWN and VOL LEFT/RIGHT buttons tD highlight the Set-Up Icon 3 Press the ACTION button to display the Set-Up Menu, "SET TIME" will be highlighted 4 Press the CH DOWN button to highlight “ANT" 5 Press the VOL LEFT or RIGHT button to select TV or CABLE 6 Press the ACTION button twice to exit the Set-Up Menu 4 Press the VOL LEFT or RIGHT button to set hours (set AM/PM accordingly) 5 Press the CH DOWN button to select minutes position 6 Press the VOL LEFT or RIGHT button repeatedly tD set minutes 7 Press the ACTION button twice to exit the Set-Up Menu - 1B- Set-up Features (cont.) Located On Remote Control SbIbcIs or Adjusts Features Whan Menu is Displayed HighlightDesirBd Feature WhBn Menu is Displayed Manual Prog (Program) - This feature allows you to select which channels are placed into Channel Scan Memory 1 Press the ACTION button to display the Main Menu 2 Press the CH UP/DOWN and VOL LEFT/RIGHT buttons to highlight the Set-Up Icon 3 Press the ACTION button to display the Set-Up Menu Displays and Exits Menus Iantspü....... lAUTO PROG MANUAL PROG DO, ACTION Auto Prog (Program) - This feature allows you to place all channels with a video signal into Channel Scan Memory 1 Press the ACTION button to display the Main Menu 2 Press the CH UP/DOWN and VOL LEFT/RIGHT buttons to highlight the Set-Up Icon 3 Press the ACTION button to display the Set-Up Menu E3HD3 4 Press the CH DOWN button to highlight "AUTO PROG" 5 Press the VOL LEFT or RIGHT button to start Auto Programming Channels will automatically advance until all channels have been scanned 6 Press the ACTION button twice after completion of Auto Programming to exit the Set-Up Menu NOTE: Channel numbers with signal present will turn blue which indicates stored in Channel Scan Memory 4 Press the CH DOWN button to highlight “MANUAL PROG" 5 Press the VOL LEFT or RIGHT button to display the Manual Programming Menu iMÄNÜAlif P R0GRÄM* [TO'ENTERiCHANNEL-.NUMBER Use the CH UP or DOWN button or the Remote Keyboard “0 through 9" buttons to select channels Press the VOL RIGHT button to add channel(s) to memory (Blue) Press the VOL LEFT button to delete channels from memory (Yellow) Repeat steps 6 and 7 to continue adding ordeleting channels Press the ACTION button twice to exit the Manual Programming Menu -19- Set-up Features (cont.) Located On Remote Control SbIbcIs or Adjusts Features When Menu is Displayed HighlighlDesired Fsalura When Menu is Displayad Displays and Exits Menus DO ACTION CC (Closed Caption) On Mute Activates the On Screen Closed Captioning when the MUTE button on the Remote Control is pressed To deactivate press the MUTE button again NOTE: This feature only functions when the Close Caption Mode is in the “OFP position The program being viewed must be broadcast with Closed Caption (Refer to your local TV guide) 1 Press the ACTION button to display the Main Menu 2 Press the CH DOWN and VOL RIGHT buttons to select the Set-Up Icon 3 Press the ACTION button to display the Set-Up Menu SET-UP GH 4 Press the CH DOWN button to highlight "CC ON MUTE" 5 Press the VOL RIGHT button to select OFF, C1 or C2 Mode Recommended Set-Up: ■ Place CC ON MUTE into the C1 Mode ■ Press the CH DOWN button to select “CC MODE” ■ Press the VOL RIGHT button to select "OFF” Helpful Hints: ■ Closed Caption information may be transmitted on either or both Caption Modes SET-UP vSET TlME-y. AUTO PROG ‘*>.N0 MANUAL PH □ H ND, fcHl JGNM UTE C1 ’ dsl JMOD W/^]S&Ë5PÀNal> FRANÇAIS 6 Press the ACTION button twice to exit the Set-Up Menu 7 Press the MUTE button when the program being viewed is broadcast with Closed Caption to activate Press again to deactivate CC (Closed Caption) Mode This Receiver has a built in decoder that provides a visual depiction of the audio portion of a television program in the form af written words across the screen (White or Colored letters on a black background) It allows the viewer to read the dialogue of a television program or other information 1 Press the ACTION button to display the Main Menu 2 Press the CH UP/DOWN and VOL LEFT/RIGHT buttons to select the Set-Up Icon 3 Press the ACTION button to display the Set-Up Menu SET-UP V mourn 4 Press the CH DOWN button to highlight “CC MODE" 5 Press the VOL RIGHT button to select OFF, C1, or C2 - OFF - Recommended mode when you do not wish to view Closed Caption ■ C1 - For video related information that can be displayed (up to 4 lines of scripl strategically placed on the television screen so that it does not obstruct relevant parts of the picture) Script can be in any language ■ C2-Anothe...
Otros modelos de este manual:TV - CT20G31 (2.13 mb)
TV - CT20G21 (2.13 mb)
TV - Color Television CT-20G21 (2.13 mb)