Votos - 3, Puntuación media: 3.3
(
)
)
|
Resumen del manual
Section 810 of the National Electrical Code, ANSI/NFPA 70 (in Canada, part 1 of the Canadian Electrical Code) provides information regarding proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, con nec tion to grounding electrodes, and requirements for the grounding electrode. 2 KEEP ANTENNA CLEAR OF HIGH VOLTAGE POWER LINES OR CIRCUITS Locate an outside antenna system well away from power lines and electric light or power circuits so it will never touch these power sources should it ever fall. When installing antenna, absolutely never touch power lines, circuits or other power sources as this could be fatal. Important Safeguards and Pre cau tions OUTDOOR ANTENNA INSTALLATION USING THE UNIT INSTALLATION 1 POWER SOURCE CAUTION Operate only from power source indicated on unit or in this manual. If uncertain, have your Electric Utility Service Company or Video Products Dealer verify your home power source. 2 POWER CORD PLUG For safety, this unit has a polarized type plug (one wide blade), or a three-wire grounding type plug. Always hold the plug fi rmly and make sure your hands are dry when plugging in or unplugging the AC power cord. Regularly remove dust, dirt, etc. on the plug. POLARIZED PLUG CAUTION: The plug fi ts into outlet one way. If it cannot be fully inserted, try reversing it. If it still will not fi t, have an electrician install the proper wall outlet. Do not tamper with the plug. GROUNDING PLUG CAUTION: The plug requires a three-hole grounding outlet. If necessary, have an electrician install the proper outlet. Do not tamper with the plug. 3 POWER CORD To avoid unit malfunction, and to protect against electrical shock, fi re or personal injury: -Keep power cord away from heating appliances and walking traffi c. Do not rest heavy objects on, or roll such objects over the power cord. -Do not tamper with the cord in any way. -An extension cord should have the same type plug (polarized or grounding) and must be securely connected. -Overloaded wall outlets or extension cords is a fi re hazard. -Frayed cords, damaged plugs, and damaged or cracked wire insulation are hazardous and should be replaced by a qualifi ed electrician. 4 DO NOT BLOCK VENTILATION HOLES Ventilation openings in the cabinet release heat generated during operation. If blocked, heat build-up may result in a fi re hazard or heat damage to cassettes. For your protection: a. Never cover ventilation slots while unit is ON, or operate unit while placed on a bed, sofa, rug, or other soft surface. b. Avoid built-in installation, such as a book case or rack, unless properly ventilated. 5 AVOID EXTREMELY HOT LOCATIONS OR SUDDEN TEMPERATURE CHANG ES Do not place unit over or near a ...
Otros modelos de este manual:VCR / vídeo - PVC1323 (2.76 mb)