Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
TV OPERATION 1 2 factory, this menu option is in the CATV setting. See "To Memorize Channels". TV - VHF/UHF channels CABLE - CABLE TV channels CH (CHANNEL) s and t Press and release the CH (CHANNEL) s or t . The channel automatically stops at the next channel set into memory. Press and hold the button down to change channels more quickly. For proper operation, before selecting channels, they should be set into the TV's memory. See "To Memorize Channels". DIRECT CHANNEL SELECTION (0-9) -Press these buttons to select a channel.The channel number will appear on the upper right corner of the TV screen. If an invalid channel number is selected, the display will revert to the previous channel. TV MODE DIRECT CHANNEL SELECTION -When the TV/CATV menu option is in the TV position, all channels can be instantly selected by using two buttons (For example, to select channel 2, press "0", then "2". If you press only "2", channel selection will be delayed for a few seconds). For channels 10 and above, press the 2 digits in order. CATV mode direct channel selection When the TV/CATV menu option is in the CATV position, channels can be selected as follows: 1-9 Press "0" twice, then 1-9 as needed. Example, to select channel 2, press "002". 10-12 Press "0", then remaining 2 digits. Example, to select channel 12, press "012". 13-99 Press the 2 digits in order. Example, to select channel 36, press "36". 100-125 Press the 3 digits in order. Example, to select channel 120, press "120". NOTE: If the station being viewed stops broadcasting, the TV will automatically shut off after 15 minutes. CLOSED CAPTION WHAT IS CLOSED CAPTIONING? This television has the capability to decode and display Closed Captioned television programs. Closed Captioning will display text on the screen for hearing impaired viewers or it will translate and display text in another language. TO VIEW CLOSED CAPTIONS 1 Press ACTION and press to select the SET UP mode, then press ACTION. 2 Press s to select CC mode and then press , then press s or Ў to select desired Closed Caption (e.g. CAPTION CH1), then press ACTION. OFFCAPTIONCH1CAPTIONCH2TEXTCH1TEXTCH2/ACTION/ 3 Press ACTION twice. Captions: This Closed Caption Mode will display text on the screen in English or another language (depending on the setting of the Closed Captions ). Generally, Closed Captions in English are transmitted on Captions Channel 1 and Closed Captions in other languages are transmitted on Captions Channel 2. Text: The Text Closed Caption Mode will usually fill 1/2 of full screen with a programming schedule or other information. After selecting a Closed Caption Mode, it will stay in effect until it is changed, even if the channel is changed. If the Captions signal is lost due to a commercial or a break in the signal, the Captions will reappear when the signal is received again. If the channels are changed, the Captions will be delayed approximately 10 seconds. For television programs broadcasting with Closed Captions, look in your TV guide for the Closed Captions symbol (CC). • When activating the Closed Captioned Decoder, there will be a short delay before the Closed Captioned text appears on the screen. • Closed Captioned text is only displayed in locations where it is available. • If no caption signal is received, no captions will appear, but the television will remain in the Caption Mode. • Misspellings or unusual characters may occasionally appear during Closed Captioning. This is normal with Closed Captioning, especially with live programs. This is because during live programs, captions are also entered live. These transmissions do not allow time for editing. • When Captions are being displayed, on-screen displays, such as volume and mute may not be seen or may interfere with Closed Captions. • Some cable systems and copy protection systems may interfere with the Closed Captioned signal. • If using an indoor antenna or if TV reception is very poor, the Closed Caption Decoder may not appear or may appear with strange characters or misspelled words. In this case, adjust the antenna for better reception or use an outdoor antenna. SETTING LOCK This TV is fitted with a V-CHIP controller which provides you with channel viewing access controls and restrictions. This function allows adult screening of TV programs based upon ratings. Press ACTION. 1 2 3 Press t to select the LOCK mode, then press ACTION. Enter your password (4 digits) using Direct channel selection (0-9). In the event of entering an incorrect password, press or wait a few seconds to delete the wrong password. 4 Enter the same password for confirmation only for the first time. 5 Press s or t to select the V-CHIP option, then press . Press or to select the ON, then press ACTION. Press s or t to select the TV RATING or MOVIE RATING option, then press 6 7 . Press or to select the desired rating for the applicable video or TV channel, then press ACTION. TV RATING TV–Y TV-Y7 TV-G TV-PG TV-14 TV-MA OFF TV-Y : all children TV-PG : p...
Otros modelos de este manual:TV - CT 13R28W (110.48 kb)
TV - CT 13R18B (110.48 kb)