Votos - 6, Puntuación media: 4.2
(
)
)
|
Resumen del manual
• Choose Mono for channels that are broadcasting in mono, or if you are having difficulty receiving a stereo signal. • Choose SAP to listen to the Separate Audio Program, which is usually a foreign-language translation. CHAPTER FOUR:SPECIAL FEATURES 4.8 SPECIAL FEATURES Viewing Closed Captions Your TV decodes and displays the closed captions that are broadcast with certain TV shows. These captions are usually subtitles for the hearing impaired or foreign-language trans lations. All VCRs record the closed caption signal from television programs, so home-recorded video tapes also provide closed captions. Most pre-recorded commercial video tapes provide closed captions as well. Check for the closed caption symbol in your television schedule and on the tape’s packaging: . Ў Function Language : English Plug & Play Convergence Caption Time Auto Clock Set V-Chip Function Language : English Plug & Play Convergence Caption Time Auto Clock Set V-Chip Quick way to access captions menu: Simply press the “Caption” 1 button on the remote control: Press the Menu button. Press the CH button to select “Function”, then press the VOL + button. 2 Press the CH button to select “Caption”, then press the VOL + button. Ў Caption : On Mode : Caption Channels : 1 Field : 1 Caption Misspellings and unusual characters sometimes occur dur 3 ing closed caption transmissions, Press the VOL + or VOL especially those of live events. button to turn closed cap- There may be a small delay before tioning “on” or “off”. captions appear when you change channels. These are not malfunctions of the TV. Ў Ў Caption : On Mode : Text Channels : 1 Field : 1 Caption In caption mode, captions appear at the bottom of the 4 screen, and they usually cover Press the CH button to only a small portion of the pic- select “Mode”, then press ture. the VOL + or VOL -button to select “Caption” or “Text.” In text mode, information unrelated to the program, such as news or weather, is displayed. Text often covers a large portion of the screen. Different channels and fields 5 display different information: Depending on the particular broadcast, it might be necessary to Field 2 make changes to “Channels” and “Field”: carries additional information that Use the CH , CH , VOL + and VOL -buttons to make the supplements the information in changes. (Follow the same procedure as in steps 3~4 above.) Field 1. (For example, Channel 1 may have subtitles in English, Press the Menu button to exit. while Channel 2 has subtitles in Spanish.) Note: The Caption feature doesn’t work in Component1(480p, 1080i), Component2 or Component3 mode. 4.9 CHAPTER FOUR:SPECIAL FEATURES SPECIAL FEATURES Viewing Picture-in-Picture You can use the PIP feature to simultaneously watch two video sources. Note: The PIP feature does not work with Component1, Component2, Component3 mode. When PIP is selected in the Zoom mode, the Mode is automatically converted into the Normal mode. Activating Picture-in-Picture Ў Ў PIP : Off PIP Quick way to access the PIP 1 menu: Simply press the “PIP” Press the Menu button. button on the remote control. Press the CH button to select “PIP”, then press the VOL + button. If you turn TV off while 2 PIP : On SOURCE : TV Size : Double Screen Swap ANT/CATV : ANT Channel : ANT 4 PIP watching and turn it on again, Press the VOL + or VOL the PIP window will disappear. button to select PIP “On”. Press the Menu button to exit. Notes • Picture-in-Picture doesn’t function when the V-chip is active. • Screen size cannot be changed in the PIP mode. • The PIP feature doesn’t work with Component1 or Component2, 3 signals. • When the cable box output is connected to ANT-B, it cannot be viewed in the PIP window. • Double Window isn't available on models HCN4226W / HCN4727W / HCN5527W / PCN5425R. CHAPTER FOUR:SPECIAL FEATURES 4.10 SPECIAL FEATURES Selecting a Signal Source (Antenna or Cable) for PIP 1 Press the Menu button. Press the CH button to select “PIP”, then press the VOL + button. PIP : On SOURCE : TV Size : Double Screen Swap ANT/CATV : ANT Channel : ANT 4 PIP Ў 2 Press the CH button to select “ANT/CATV.” If an antenna is connected, the setting is “ANT.” If a Cable TV system is providing the signal, press the VOL + or VOL -button until the appropriate type of cable system is is displayed (“STD,” “HRC,” or “IRC”). PIP : On SOURCE : TV Size : Double Screen Swap ANT/CATV : ANT Channel : ANT 4 PIP Press the Menu button to exit. Selecting a Signal Source (External A/V) for PIP PIP : On SOURCE : TV Size : Double Screen Swap ANT/CATV : ANT Channel : ANT 4 PIP Quick way to access the signal 1 source (PIP): Simply press the Press the Menu button. “Source” button on the remote control. Press the CH button to select “PIP”, then press the VOL + button. Ў PIP : On SOURCE : TV Size : Double Screen Swap ANT/CATV : ANT Channel : ANT 4 PIP If you select “TV”, the PIP image is 2 the same as the main image. Press the CH button to select “SOURCE”, then press the VOL + or VOL button to cycle through a...
Otros modelos de este manual:TV - HCN4727W (3.42 mb)
TV - HCN473W (3.42 mb)