Votos - 2, Puntuación media: 5
(
)
)
|
Resumen del manual
See pages 21 and 45. 4 5 6 9 !. !. !™ 7 REC (record) OUT — Composite video and audio outputs for recording down-converted digital off-air feed (ATSC), digital Cable (QAM), or IEEE-1394 programs to an analog VCR. See page 17. Note: The REC OUT jacks cannot be used for timed recordings. 8 VIDEO 1 IN and VIDEO 2 IN — Two sets of standard (composite) video and standard audio inputs plus optional S-video inputs for connecting devices with composite video or S-video output. Note: Standard (composite) video and S-video cables carry only video information; separate audio cables are required for a complete connection. 9 ColorStream HD-1 and ColorStream HD-2 — Two sets of ColorStream® high-definition component video and standard stereo audio inputs for connecting devices with component video output, such as a Toshiba DVD player with ColorStream.® See pages 14 and 16. Note: Component video cables carry only video information; separate audio cables are required for a complete connection. 0 A/V OUT — Standard (composite) video and standard audio outputs for connecting a VCR for editing and dubbing. See page 17 for details. !. Variable Audio OUT — Standard audio ouputs for connecting an analog amplifier with external speakers. See page 19. !™ Audio Center Channel IN plus ON/OFF switch — For use with an external A/V receiver to enhance your TV’s audio. When the switch is set to OFF, the TV’s audio is output through the TV’s internal speakers. When the switch is set to ON, the TV’s audio is output through the A/V receiver and the TV’s speakers are used as a center channel. See page 20. Apple and FireWire are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. Copyright © 2003 TOSHIBA CORPORATION. All rights reserved. Chapter 2: Connecting your TV Overview of cable types Note: Two dual-blaster IR blaster cables are included with your TV. These IR blaster cables have specific characteristics that allow them to work with this TV’s IR OUT and G-LINK ports. Other aftermarket IR blaster cables may not function correctly and could cause damage. SUCH DAMAGE IS NOT COVERED BY YOUR TOSHIBA WARRANTY because it is a result of misuse. All other required cables, if not provided with your other devices, can be purchased at many electronics accessory suppliers. . Coaxial (F-type) cable is used for connecting your antenna, cable TV service, and/or cable converter box to the ANT-1 and/or ANT-2 RF inputs on your TV. . Standard A/V cables (composite video) usually come in sets of three, and are for use with video devices with standard audio and standard (composite) video output. These cables (and the related inputs on your TV) are typically color-coded according to use: yellow for video, red for stereo right audio, and white for stereo left (or mono) audio. . S-video cable is for use with video devices with S-video output. Separate audio cables are required for a complete connection. Note: An S-video cable provides better picture performance than a composite video cable. If you connect an S-video cable, be sure to disconnect the standard (composite) video cable or the picture performance will be unacceptable. . Component video cables come in sets of three and are for use with video devices with component video output. These cables are typically color-coded red, green, and blue. (ColorStream® is Toshiba’s brand of component video.) Separate audio cables are required for a complete connection. Note: Component video cables provide better picture performance than a standard (composite) video or S-video cable. . DVI-D digital single-link cable is for use with video devices with uncompressed DVI-D digital single-link output. DVI-D cable delivers digital video in its native format (see page 18). Separate audio cables are required for a complete connection. Note: DVI-D digital single-link cable provides better picture performance than a standard (composite) video or S-video cable. . IEEE-1394 cable is for use with video devices with compressed digital video output that meets CEA specifications for IEEE-1394 (also known as Firewire™). IEEE-1394 cables carry both video and audio information; therefore, no separate audio cables are needed for a complete connection. See pages 22 and 24. Note: IEEE-1394 cable provides better picture performance than a standard (composite) video or S-video cable. . Dual-wand IR blaster cable is for use with video devices with IR (infrared) remote control. Two dual-wand IR blaster cables are included with your TV. One is for connection to the G-LINK jack (page 25) to enable TV Guide On Screen™ device control and one-touch recording. The other can be used with the TV’s IR pass- through features (page 21) and TheaterNet on-screen device control feature (page 45). . Optical audio cable is for connecting receivers with Dolby Digital or PCM (pulsecode modulation) optical audio input to the TV’s DIGITAL AUDIO OUT jack. See pages 10 and 19. Note regarding picture quality . For GOOD picture quality: Use ...