Votos - 4, Puntuación media: 4
(
)
)
|
Resumen del manual
Indicator flashes when a timer program has been set and the TV/VCR is turned off with no cassette inserted, a cassette with no safety tab inserted, or there has been a power interruption. REPEAT Indicator Indicator is lit during auto repeat. REW (Rewind) Rewinds the tape when the TV/VCR is stopped. Searches the picture in reverse during playback. PLAY Plays a tape. FF (Fast-Forward) Fast forwards the tape when the VCR is stopped. Searches the picture forward during playback. REC (Record) Press to start TV/VCR recording. The indicator in the button is lit during recording. WAKE-UP Indicator Indicator is lit when the wake-up timer has turned on the TV/VCR. Remote Sensor Receives signals from the remote. Aim remote at this sensor with no objects between them. Hooking Up the TV/VCR Location of Controls — Back Panel VHF/UHF VIDEO AUDIO IN VHF/UHF (Antenna) Connector Receives the signal from an antenna or cable system. VIDEO and AUDIO IN Jacks Receives signals from another component, such as a VCR or camcorder, when it is connected to these jacks. To select these jacks, press 00 to display VIDEO. Choosing a Hookup Answer the questions to choose the hookup for your TV/VCR. 1. How do you receive your TV signals? Choose one answer from below. A. Supplied dipole antenna – Turn to page 22. B. Rabbit ears (set-top) and/or bowtie antenna – Turn to page 22. C. Outside antenna – Turn to page 22. D. Cable System – Go to question 2. 2. What type of Cable-TV system* do you have? Choose one answer from below. A. Cable without a box – Turn to page 22. B. Cable box to unscramble all channels – Turn to page 23. C. Cable box to unscramble only premium channels, such as HBO, Showtime, Cinemax, etc. – Turn to page 23. *You may need to contact your local cable company for assistance. Optional Hookup To hook up a VCR or camcorder for copying tapes — Turn to page 24. Hooking Up the TV/VCR Connect Supplied Antenna, Antenna, or Cable System Without a Cable Box A. Supplied Antenna Follow these steps to connect the supplied antenna to your TV/VCR. Do not connect this antenna if you plan to connect a different type of indoor or outdoor antenna or cable system. 1. Insert the antenna base into the slot on the back of your TV/VCR. 2. Connect the twin-lead ends of the antenna to the screw terminals of the supplied antenna adapter. 3. Connect the antenna adapter to the VHF/UHF connector on the back of the TV/VCR. 4. Plug in the TV/VCR’s power cord. 5. Turn to page 2 for “Setting Up the TV/VCR.” Adjust the length and position of the antenna rods for the best reception. • For viewing VHF channels, extend the rods fully. • For UHF viewing, shorten the rods. VHF/UHF VIDEO AUDIO IN Supplied Antenna Antenna Slot Twin-Lead Ends Antenna Adapter (supplied) Back of TV/VCR A B. Antenna or Cable System Without a Cable Box 1. Connect as shown. This connection may require additional accessories not provided. 2. Plug in TV/VCR’s power cord. 3. Turn to page 2 for “Setting Up the TV/VCR.” VHF/UHF VIDEO AUDIO IN B Match Your Type of Antenna or Cable OR OR OR Antenna Adapter (supplied) Back of TV/VCR Antenna Mixers Hooking Up the TV/VCR Connect a Cable System With a Cable Box A. Cable Box Required to Unscramble all Channels 1. Connect as shown. This connection may require additional accessories not provided. 2. Plug in power cords of TV/VCR and cable box. 3. Turn to page 2 for “Setting Up the TV/VCR.” B. Cable Box Required to Unscramble Only Premium Channels 1. Connect as shown. This connection requires additional accessories not provided. 2. Plug in power cords of TV/VCR and cable box. 3. Operation Place the A-B switch in the B position to watch premium channels. Place the A-B switch in the A position to watch other channels when cable box is not needed. 4. Turn to page 2 for “Setting Up the TV/VCR.” VHF/UHF VIDEO AUDIO IN OUTIN VHF/UHF VIDEO AUDIO IN BA OUTIN A B Cable Box Coaxial Cable Cable from Cable System Cable Box Antenna Splitter A-B Switch Coaxial Cables Coaxial Cable Back of TV/VCR Back of TV/VCR Cable from Cable System Hooking Up the TV/VCR Connect a VCR or Camcorder for Copying Tapes A. VCR for Copying Tapes 1. Connect as shown. This connection requires additional accessories not provided. 2. Plug in power cords of VCR and TV/VCR. 3. Turn to page 19 for “Copying and Editing Tapes.” Press 00 on the remote to select the line (audio/video) input on the TV/VCR to receive the signal from the VCR. If your VCR has stereo AUDIO OUT jacks, connect the audio cable to the jack labeled MONO. If neither jack is labeled MONO, you may need a Y- adapter to hear both channels. VCR (Playback Only) TV/VCR (Recording Only) OUT TO TV IN FROM ANT. VHF/UHF 3 CH. 4 Audio/Video Cables From Antenna, Cable, or Cable Box IN OUT VIDEO AUDIO IN OUT VHF/UHF VIDEO AUDIO IN Optional A B. Camcorder for Copying Tapes 1. Connect as shown. This connection requires additional accessories not provided. 2. Plug in TV/VCR’s power cord. 3. Turn to page 19 for “Copying and Editing Tapes.” Pre...