Votos - 2, Puntuación media: 3
(
)
)
|
Resumen del manual
Chapter 1 Connections & Setup SYSTEM SET-UP CLOCK SET LANGUAGE/IDIOMA/LANGUEAUTO CLOCK ON OFF STANDARD TIME DAYLIGHT SAVING TIME . – ON OFF AUTO .+/–/ENTER/MENU. DAYLIGHT SAVING TIME CH SET-UP TV CATV AUTO CH MEMORY ADD/DELETE .+/–/ENTER/MENU. .+/–/ENTER/MENU. CH SET-UP TV CATV AUTO CH MEMORY ADD/DELETE Setting Daylight Saving Time The Daylight Saving Time is set to the AUTO position by default. If you want to set the time manually you need to set it “ON” on the first Sunday in April, and set it “OFF” on the last Sunday in October. Note: If your area does not have Daylight Saving Time, you need to set the position to OFF. 1. Press the MENU on the remote (the MENU appears). 2. Select SYSTEM SET-UP, then press ENTER. 3. Select DAYLIGHT SAVING TIME, then press ENTER. 4. Press the up or down arrow button to either turn ON or OFF Daylight Saving Time. 5. Press the MENU button until the MENU screen disappears. Setting Up Your Channels The TV/VCR is set to receive TV cable channels. If you want the TV/VCR to receive UHF/VHF channels, follow the directions below. 1. Press MENU on the remote (the MENU appears). 2. Press the down arrow button to select CH SET-UP, then press ENTER. 3. Press ENTER to select TV mode. 4. Press MENU until the MENU screen disappears. Complete Auto Channel Memory The Auto Channel Memory allows the TV/VCR to search for all channels viewable through your antenna or cable TV system. This is sometimes called “auto programming.” 1. Press MENU on the remote (the MENU appears). 2. Press the down arrow button to select CH SET-UP, then press ENTER. 3. Press the down arrow button to select AUTO CH MEMORY, then press ENTER. The TV searches for all available channels and will place them into your TV’s memory. 4. Press MENU until the MENU screen disappears. Chapter 1 Connections & Setup Adding or Removing Channels You might want to add or remove channels if some of them are not active, have weak signals, or you do not want them in your channel memory. A channel that has been removed can still be selected by pressing the remote control’s number buttons. 1. Press MENU on the remote (the MENU appears). 2. Press the down arrow button to select CH SET-UP, then press ENTER. 3. Press the down arrow button to select ADD/DELETE, then press ENTER. 4. Use the number buttons to enter the channel you want to add or delete. Press ENTER to add or delete the channel. The screen shows whether the TV adds or deletes the channel. 5. Press MENU until the MENU screen disappears. CH 003ADD .0–9/+/–/ENTER/MENU. Chapter 1 + TIMER ON • OFF EJECT SPEED CAPTION CH + SKIP-SEARCHPPMUTE CH SLEEP GO BACK CALLPROGRAM AU TRA SLOW CANCELMENU 1 2 3 4 5 6 7 8 9 0 INPUT TV/VC/ R PLAA RECORD PAUSEST VOLVOL+ TIMER ON • OFF EJECT SPEED CAPTION CH + SKIP-SEARCHPPMUTE CH SLEEP GO BACK CALLPROGRAM AU TRA SLOW CANCELMENU 1 2 3 4 5 6 7 8 9 0 INPUT TV/VC/ R PLAA RECORD PAUSEST VOLVOL Connections & Setup VCR Basics Now that you’ve finished the initial setup, you can watch TV. You can also begin using your VCR. In order to begin, you must first understand some basic concepts. Playing a Tape EJECT Insert a tape in the TV/VCR. SPEED The tape automatically begins playback (if the safety tab on the tape is removed). • Press FORWARD or REVERSE on the remote (FWD or REW on the front panel) to position the tape. • Press PLAY (if necessary) to begin tape play. TRACKING • Press PAUSE for stop action. +/- buttons • Press TRACKING up or down (TRACKING + or - on the remote control) to remove any streaks from the picture, if necessary. • Press STOP to stop playing the tape. • Press EJECT to eject the tape. Playback buttons Automatic Rewind The TV/VCR automatically rewinds the tape when it reaches the end of the tape during playback and the TV/VCR will eject the tape. Basic Recording 1. Set the tape speed by pressing the SPEED button on the remote. See Chapter 2 for more details on tape speed. 2. Press the RECORD button to begin recording. 3. Press STOP when you want to stop recording. If you want to pause the recording for a short time (such as during a commercial), press PAUSE instead of STOP. Checking the Safety Tab To record, you must insert a tape into the TV/VCR that has its safety tab in place. You can’t record on a tape with the safety tab removed. If the safety tab is Safety tab removed and you want to record on it, simply cover the hole with adhesive tape. Chapter 1 Connections & Setup + TIMER ON • OFF EJECT SPEED CAPTION CH + SKIP-SEARCHPPMUTE CH SLEEP GO BACK CALLPROGRAM AU TRA SLOW CANCELMENU 1 2 3 4 5 6 7 8 9 0 INPUT TV/VC/ R PLAA RECORD PAUSEST VOLVOL L.E.D. The Buttons on the Remote Control 0-9 (Number buttons) Enter channel numbers and your V-CHIP password directly through the remote control. If you are receiving UHF/VHF channels, select a channel by pressing two number buttons. For example, to select channel 2, press 0, then 2. If you are receiving cable channels, select channels 1-12 by pressing three number buttons. For example, to select chann...