Votos - 4, Puntuación media: 3.8
(
)
)
|
Resumen del manual
Text 1 and Text 2 Display on-screen boxes containing the text of general information not necessarily related to the program being watched. Note: The Text modes cover nearly half of the picture on-screen to display the closed- captioned text. Menu Language Displays a choice list that lets you select your preferred language for the menus: English, Spanish or French. Setting Closed-Caption Modes The TV/VCR offers four closed-captioned modes, including two text modes. To set the Closed-Caption Mode: 1. Select Screen from the Main menu. 2. Press 2 to select the Mode. Each time you press 2 the Mode will change on the Closed Captioning menu screen. TV/VCR MAIN MENU 1 Screen 2 Time TIME 1 Set Time and Date 2 Sleep Timer 3 Wake-Up Timer 0 Exit Time Menu Set Time and Date Displays a control panel that lets you enter the current time. The on-screen directions guide you through the steps needed to set the time. Sleep Timer Displays a control panel that lets you select the amount of time you want to give the TV/VCR before it shuts itself off. Wake-Up TImer Displays a control panel that lets you set a timer that turns the TV/VCR on automatically. You can set it to wake you up in the morning or remind you that a favorite program is about to start. Enter the channel and time using the number buttons then follow the instructions on-screen. Chapter 3 Using the TV/VCR’s Menu System Additional Setup Features in the Menu 1. Press MENU to display the TV/VCR MAIN MENU. 2. Press 5 to select the SETUP menu. Now you are ready to select an item from the menu to setup. TV/VCR MAIN MENU 1 Screen 2 Time 3 Timer Recordings 4 Parental Controls 5 Setup SETUP 1 Auto Channel Search 2 Add/Remove Channels 3 Set Auto Repeat 4 Auto Play: ON 5 Signal Type: CABLE 0 Exit TV/VCR MAIN MENU 1 Screen 2 Time 3 Timer Recordings 4 Parental Controls 5 Setup SETUP 1 Auto Channel Search 2 Add/Remove Channels 3 Set Auto Repeat 4 Auto Play: 5 Signal Type: 0 Exit AUTO REPEAT Set the length of time you want the tape to play in a repeating loop Loop from 0:00 to 2:55 (h:mm) Press MENU to exit Auto Play This feature allows the TV/VCR to automatically start playing a tape when it is inserted. (The safety tab on the tape must be removed). 1. Press MENU to display the TV/VCR MAIN MENU. 2. Press 5 to display the SETUP menu. 3. Press 5 to change the Auto Play setting. The Auto Play feature is set to On at the factory. • Select On if you want a tape with its safety tab removed to start playing automatically. • Select Off if you do not want a tape with its safety tab removed to start playing automatically. Auto Repeat Feature This feature tells the TV/VCR to play a tape (or part of a tape) continuously. The TV/VCR will automatically rewind the tape, or a selected portion of the tape, and play it repeatedly. 1. Using REW, FF, or PLAY, go to the place on the tape that you want to be the beginning of the section that automatically repeats. Reset the time counter to 0:00:00 by pressing DISPLAY, then CLEAR. 2. Using FF or PLAY, go to the place on the tape that you want to be the end of the section that plays continuously. Remember the numbers on the time counter. (2:55 is the end time for Auto Repeat in the example to the left.) 3. Press MENU to display the TV/VCR MAIN MENU. 4. Press 5 to display the SETUP menu. 5. Press 3 to display the AUTO REPEAT menu. 6. Using the number buttons, enter the amount of time you want the tape to repeat (the number from Step 2). In the example at right, the section that the TV/VCR will automatically repeat is 2:55—two hours, 55 minutes long. To Cancel Auto Repeat Press MENU, then 5, then 3, and then CLEAR. Chapter 3 Chapter 4 Other Information Chapter Overview: • Troubleshooting • Care and Cleaning • Front Panel Buttons • Limited Warranty • Accessory Order Form • Index Changing Entertainment. Again. Other Information Troubleshooting Most problems you encounter with your TV/VCR you can correct by consulting the Troubleshooting list that follows. General TV/VCR Problems TV/VCR won’t turn on • Press the TV or VCR button to turn on the TV/VCR. • Make sure the TV/VCR is plugged in. • Check the wall receptacle (or extension cord) to make sure it is “live” by plugging in something else. • Something might be wrong with your remote control. Press the POWER button on the front of the TV/VCR. If the TV turns on, go to page 39 for remote control solutions. • The front panel controls may be locked (disabled). Use the remote control to unlock the front panel controls by pressing the POWER button for 6 seconds. Controls don’t work • If you’re using the remote control, press the TV button first to make sure the remote is in TV mode. • The front panel controls may be locked (disabled). Use the remote control to unlock the front panel controls by pressing the POWER button for 6 seconds. • Unplug the TV/VCR for two minutes and then plug it back in. Turn the TV on and try again. TV/VCR turns off unexpectedly • Sleep timer may have been activated. Go to page 33 fo...