Votos - 0, Puntuación media: 4
(
)
)
|
Resumen del manual
SET UP VCR ..... REPEAT PLAY : OFF BEEPER ON SELECT SET END A ▼ KEY ► KEY MENU KEY When REPEAT PLAY : ON is selected, (the REPEAT indicator lights on the front panel), the Combination VCR will playback the tape to its end, or until a blank portion of 30 seconds or more is reached. (Erased portions of tape are not considered blank.) The tape is then automatically rewound and played again. This operation is repeated until you cancel Repeat Play. All function buttons (REW, FF, etc.) are operational during Repeat Play. Push MENU to exit the SET UP VCR screen. Then, push A V <3 E>to select “EXIT ” Now, push MENU to exit the MAIN MENU. You may also turn the repeat play feature on and off at the Combination VCR. During playback, push PLAY once or twice until the REPEAT indicator lights up (ON), or goes out (OFF). One Minute Skip With this feature, you can skip over commercials recorded on a tape. Push ZERO/1 MIN in Play mode. * The Combination VCR will go into FF search mode and skip over 60 seconds of recorded time. Then, normal playback will resume. Zero Search You can reset the Time Counter to zero and then return to that point. Push DISPLAY to display the Time Counter overlay. Push COUNTER RESET where desired to reset the Time Counter to 0:00:00. STOP 12:00AM WNET 0:00:30 SLP STOP 12: 00AM WNET 0:00:00 SLP Push ZERO/1 MIN in Stop mode. • The Combination VCR will go into FF or REW mode and stop at the last point the Time Counter was set to 0:00:00. 16 fjp) Record On a Tape Check list before you begin. □ All connections are made (see page 5). □ Your Combination VCR is plugged in. ■<5D ^PROGRAM rju RECORD TIMER Indicator indicator Insert a cassette with record tab. The Combination VCR power comes on automatically. or 'СПЭ-©| 0 © ©! o © © Push A Tor NUMBERED keys on the remote control to select a channel. • Or, push CH UP/DOWN on the Combination VCR. • To record from an outside source, push A V to select LINE input (see bottom of the page). Push SPEED repeatedly until the desired tape speed is displayed (See page 21). SP = Standard Play LP = Long Play SLP = Super Long Play REC 02 Push REC/TIME on the remote control to start recording. • Or, push REC/TIME on the Combination VCR. • To edit out unwanted portions, push PAUSE to pause the recording in progress. To release, push PAUSE again. TO SET SPECIFIC REC TIME PLEASE PUSH REC KEY One Touch Timer Recording (OTR) The Combination VCR stops recording at a preset time. In step 4, push REC/TIME repeatedly to set the length of the recording. Each push will change the time as shown. C►Normal Rec—►0:30—MAO-v 4:00-«— 3:00-4— 2:00-«— 1:30^ • The PROGRAM TIMER indicator lights on the front panel. Push STOP on the remote control to stop recording. • Or, push STOP/EJECT on the Combination VCR. While it is possible to change the tape speed when you are recording, there will be some distortion on the tape where the change occurred. The remaining recording time of an OTR can be displayed by pushing DISPLAY. After the Combination VCR has been in Rec Pause mode for 5 minutes, it will stop automatically to protect the tape and video head. Selecting the Input Mode You can select the Input Mode in either of the following ways. ■ Push A V- The display will change in the order below. C—► 1 — 2— 3 n (CATV) (CAjv) (tv) ^ LINE-*-125 or 69*—^ ■ a. Push MENU to display the menu. b. Push A V ^ G>to select "TV,” and then push MENU to display the SET UP TV screen. c. Push A Vto select “INPUT SELECT,” and then push £> repeatedly to select “TUNER” or “LINE.” 17 Basic VCR Operation Your Combination VCR can be set up to do a recording while you are away or otherwise occupied. Up to 8 programs can be placed in memory. You can choose to record one time, daily, or weekly. Check fist before you begin. □ All connections are made (see page 5). □ Your Combination VCR is plugged In. □ The clock is set. □ The tape is long enough. □ The record tab is in place. Push PROG to display the program screen. ■ If a program is already in memory, push» Vrepeatedly, and then fMo select an unused program number. Çf/ÇI/ START STOP CH j 11BM SLP SELECT START DATE SELECT SET END A ▼ KEY ► KEY PflOG KEY Push A W and |>to select and set one of the following: 1 ~31 = One time recording DAILY = Same time MON - FRI WEEKLY = Same time once a week STOP/EJECT PROGRAM TIMER Indicator Example Today's Date ^-8—9.......31— 1 —2'..... 7 SELECTA/T Selection Order DAILY (^WEEKLY......WEEKLY_WEEKLY _J (SAT) (MON) (SUN) Push A Tand <] [>to select and set each of the remaining items at right. To Make Corrections Repeatedly push[J>or<3to move the cursor to the right or left, and then make the correction. Remaining Items: • START time • STOP time • CH(annel) number, or LINE for outside source recording • Speed (SP, LP, SLP) Push PROG to end the program. • This screen appears for confirmation. To Enter More Programs Push ^ ^ and...
Otros modelos de este manual:VCR / vídeo - VV2507 (1.31 mb)