Votos - , Puntuación media: ( )

Manual de usuario Magnavox, modelo CC19B1MG

Fabricar: Magnavox
Tamaño del archivo: 652.1 kb
Nombre del archivo: adacc70f-2a07-b744-4d47-026702bde469.pdf

Idioma del manual:

El documento se está cargando, por favor, espere

Descargar ahoraCerca

El documento se está cargando, por favor, espere

Descargar ahoraCerca

Details are on page 10. TV/VCR has no power. • Make sure the power plug is completely connected to an AC (alternating current) outlet. Helpful Hints (cont’d) 55 The remote control is not available, or the remote control will not access the pop up menu. • Use the buttons on the front panel of the TV/VCR to access the pop up menu. You can not enter numbers (for example, to program a timer recording) using the front panel buttons. Details are on page 20. TV/VCR power shuts off after 15 minutes. • To save energy, the TV/VCR will shut itself off after 15 minutes when it is on a channel that is not receiving a broadcast signal (for example, a station that has gone off the air for the night). This is normal. Channel reception is poor. • Check connections, then set up the channels again. Details are on page 10. TV/VCR does not have a picture. • Adjust the antenna. Details are on page six. • Adjust the TV/VCR picture controls. Details are on pages 24-25. TV/VCR has poor sound or no sound. • Adjust the volume. • Press the MUTE button to restore the volume. Tape playback is poor or tape is destroyed. • Adjust the tracking. Details are on page 52. • If moisture has accumulated in your TV/VCR, keep the power on for at least two hours, but do not try to play a tape. Details are on page 54. TV/VCR does not display closed captions. • Make sure COUNTER ONLY is set to OFF. Details are on page 26. • Make sure closed captioning is available for the program. Refer to the TV listings in your local newspaper. Remote control does not operate TV/VCR. • Aim the remote control directly at the TV/VCR’s remote sensor. Details are on pages five and 20. • Remove all obstacles between the remote control and the TV/VCR. • Inspect and replace the batteries in the remote control. Details are on page five. Number buttons won’t work for channels above 69. • Enter channel numbers as a two-digit number. If you want to select channels 100 and above, enter channel numbers as a three-digit number. Details are on page 22. • If you are using an antenna, only channels 2-69 will be available. A tape can’t be inserted into the TV/VCR. • Insert the tape window side up, with the record tab facing you. • Make sure a tape isn’t already in the TV/VCR by pressing the STOP/EJECT button on the TV/VCR. • Gently push on the center of the tape. Never force a tape into the TV/VCR. • If a timer recording is set and the TV/VCR power is off, the TV/VCR will eject the tape if the record tab is missing. A tape can’t be removed from the TV/VCR. • Make sure the power plug is completely connected to an AC (alternating current) outlet. • If a timer recording is programmed, turn on the TV/VCR power, then eject the tape. Be sure to insert a tape and turn off the TV/VCR power for the timer recording. TV/VCR ejects the tape when you try to start a recording. • Make sure the tape has a record tab. Details are on page five. The cylinder rotates when tape playback is stopped. • To enable the quick play mechanism, the cylinder will rotate for about five minutes. This is normal. The quick play mechanism switches the tape mechanism from Stop to Play in just one second. 56 Glossary AUDIO In Jack: jack located on the front of the TV/VCR which is used to record audio from another source. Automatic Channel Setup: process in which the TV/VCR scans all available channels and places the ones you receive in its memory. Then, when you push the CHANNEL o/p buttons, you only scan through channels you receive. Bands: settings that allow you to tune channels. • Antenna – VHF (very high frequency; channels 2-13) and UHF (ultra high frequency; channels 14-69). • Cable – all standard channels can be received without a Cable Box. Brightness: adjusting increases or decreases the brightness of the color on the screen. Color: adjusting pales or brightens the TV/VCR color. Dubbing: copying a tape using a VCR. HQ: high quality; a feature in the TV/VCR circuitry which pro vides enhanced picture detail. Line Input: The channel to which you set your TV/VCR during dubbing. The line input channel is always channel 00 (A/V IN). Mode: a TV/VCR operation. OTR: One-Touch Recording; a timed recording that starts immediately and records for 30 minutes to eight hours, whichev er you specify. Picture: adjusting increases or decreases the contrast of the picture on the screen. Sharpness: adjusting softens or clarifies the picture on the screen. Tape Speeds: how fast the tape travels during playback or recording. • SP (standard play) – fastest tape speed (recording time for a T120 tape is approximately two hours); best picture quality. • LP (long play) – average tape speed; playback only. • SLP (super long play) – slowest tape speed (recording time for a T120 tape is approximately six hours). Tint: adjusting changes the tints of the picture on the TV/VCR from purple to green. VIDEO In Jack: jack located on the front of the TV/VCR which is used to record video from another source. Limited Warranty 57 TV/VCR COMBINATION 9...