Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
This is not a fault of the machine, but is a by- product of the technology involved in producing a unit with 2 video heads. • If the unit is left in the Pause mode for more than 5 minutes, the unit will automatically switch to the stop mode. NOISE CANCEL (in the Still mode) This feature allows you to reposition or reduce the noise lines of a still picture. Hit [PAUSE/STILL F FF] so that the noise lines change position on the screen so you can see the picture in its entirety without distracting noise lines. NOTE: • This feature can be activated ONLY when viewing a tape recorded in the SLP mode. If the tape was originally recorded in the SP or LP mode, the still picture may revert to black and white in addition to the “noise bars”. This is normal. VERTICAL HOLD CONTROL In the Pause/Still mode only, when the picture begins to vibrate vertically, stabilize the picture by pressing [CHANNEL K KK/L LL]. NOTE: • If there are video noise lines on the screen, reposition or reduce them. Refer to “NOISE CANCEL” above. -18-EN SPECIAL PLAYBACK Make sure ... • The unit must be turned on. • Insert a prerecorded tape. RENTAL PLAYBACK This function enables you to improve the picture quality when playing back worn cassettes such as rented tapes. 1 Select “USER’S SET UP” – M E N U – TIMER PROGRAMMING Hit [MENU]. PICTURE CONTROL SETTING CLOCK CHANNEL SET UP Press [PLAY/K KK] or [STOP/L LL] to B USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN point to “USER’S SET UP”, then TIME SEARCH hit [F.FWD/ B BB]. 2 Set “RENTAL” to [ON] – USER’S SET UP – Press [PLAY/K KK] or [STOP/L LL] to point to “RENTAL”. B RENTAL [ON] REPEAT PLAY Press [F.FWD/ B BB] or [REW/s ss] AUTO RETURN [OFF] until [ON] appears. 3 Exit the Rental setting Hit [MENU] to return to the TV mode. 4 Start playback Hit [PLAY/K KK] to start playback. “RENTAL PLAY B” appears. • Once you select the Rental mode, it stays in effect even after you turn off the unit. TO CANCEL THE RENTAL MODE Repeat steps 1 to 2 and select [OFF] using [REW/s ss] or [F.FWD/ B BB]. Hit [MENU] to return to TV mode. Even if there is a power failure of any kind, the unit will retain its memory for this feature. AUTO REPEAT PLAYBACK The unit has the auto repeat function that allows you to repeat a tape indefinitely without hitting [PLAY/K KK]. ALL REPEAT: Repeat playback from the beginning to the end of the tape. BLANK REPEAT: Repeat playback from the beginning to a blank part, which is blank for more than 10 seconds. 1 Select “USER’S SET UP” – M E N U – Hit [MENU]. TIMER PROGRAMMING PICTURE CONTROL Press [PLAY/K KK] or [STOP/L LL] to SETTING CLOCK CHANNEL SET UP B USER’S SET UP point to “USER’S SET UP”, then V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH hit [F.FWD/ B BB]. 2 Select “ALL” or “BLANK” – USER’S SET UP – Press [PLAY/K KK] or [STOP/L LL] to point to “REPEAT PLAY”. RENTAL B REPEAT PLAY [OFF] [ALL] AUTO RETURN Press [REW/s ss] or [F.FWD/ B BB] repeatedly until your desired selection [ALL] or [BLANK] appears. 3 Exit the Repeat Play setting Hit [MENU] to return to the TV mode. 4 Start playback Hit [PLAY/K KK] to start the Repeat Play. “REPEAT PLAY B” appears. • Once you select the Repeat Play mode, it stays in effect even after you turn off the unit. • If the Rental mode is set [ON], the “RENTAL PLAY B” display has priority. TO CANCEL THE REPEAT PLAY MODE Repeat steps 1 to 2 and select [OFF] using [REW/s ss] or [F.FWD/B BB]. Hit [MENU] to return to TV mode. Even if there is a power failure of any kind, the unit will retain its memory for this feature. -19- EN SEARCH Make sure ... • The unit must be turned on. • Insert a tape. ZERO RETURN This function allows you to search easily a beginning point that you want to review by rewinding or fast forwarding. NOTE: • Zero Return WILL NOT work on a blank tape or a blank portion of a tape. 1 Stop a tape at your desired point Rewind or fast forward the tape to the beginning point at which you want to review. 2 Reset the counter to 0:00:00 Hit [COUNTER RESET] repeatedly. 3 Begin recording or playback Press [RECORD] or [PLAY/K KK]. Hit [STOP/L LL] when recording or playback is completed. 4 To activate “ZERO RETURN” mode Hit [MENU]. Press [PLAY/K KK] or [STOP/L LL] to – M E N U – TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK CHANNEL SET UP point to “ZERO RETURN”, then hit [F.FWD/B BB]. USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] The counter will appear on the TV CAPTION [OFF] B ZERO RETURN screen. screen. TIME SEARCH The tape will automatically stop when the counter returns to 0:00:00. (approx.) PICTURE SEARCH This feature is very useful in finding or skipping over a particular scene on a tape. In this mode, the sound will be muted. 1 Start Picture Search During playback, press [REW/s ss] or [F.FWD/ B BB] to view at a high speed (in forward/reverse). 2 Change searching speed Press [REW/s ss] or [F.FWD/B BB] again to view at super high speed (in the LP/SLP modes only). NOTE: • Tapes recorded in the SP or...
Otros modelos de este manual:TV - 6319CE (834.77 kb)