Votos - 3, Puntuación media: 3.7 ( )

Fabricar: Dynamat Tamaño del archivo: 205.18 kb Nombre del archivo: Idioma del manual:

This works best centered in the panel you are quieting. (Note: Some panels may require full coverage to gain proper resonance control.) Before you start your installation, be sure surface is totally free from dust, dirt and foreign matter. Dust will greatly affect the adhesion of the Dynamat thus reducing the damping efficiency. Using a razor knife or scissors, cut the Dynamat to the desired shape and size (a cardboard or paper template may be helpful.) Remove the release liner from the back of the Dynamat and apply Dynamat to the prepared surface. On large surfaces, remove the release liner in sections working your way down and across the panel. Apply the Dynamat to the panel surface with a Dynamat roller tool. Take the roller tool and work the Dynamat into all of the contours of the metal panel. Using a razor knife, poke holes in any air pockets that may have formed between the panel and the Dynamat. Work the air out with the roller tool. Eliminating air pockets will ensure lasting adhesion of the Dynamat to the panel, giving you maximum damping efficiency....

Descargar ahora

Introduzca dos números de la imagen: