Votos - 2, Puntuación media: 4 ( )

Fabricar: American Innovative, Tamaño del archivo: 691.32 kb Nombre del archivo: Idioma del manual:

2008 P502373 The following patents apply: 6,409,134, 6,505,988, 6,726,167 Apple Cinema Display and Apple Studio Display are registered trademarks of Apple Computer, Inc. Rev D Hardware Parts List - Arm Page 2 Item Description & Part No. Quantity 10-32 x 3/8" Phillips Flat Head Screw 705198 1 Dog Washer 105189 1 10-32 x 3/8” Phillips Flat Head Screw 702281 1 (4-pack) M3-16 Socket Head Screw 702038 3 M3 Steel Nut 702161 3 1 M3 Wrench DX2013 M2 Allen Wrench 702040 1 1 M2.5 Allen Wrench 702218 1 Cable Trough 702830 Forearm Cap 702825 1 Endcap Bumper 702829 1 1 Cable Clip DX1835 Hardware Parts List - FLEXmount™ Page 3 *Depending on the mount style you select, you will not use all of the parts listed below. Item Description & Part No. Quantity Mount Column 702831 1 1 Base Plate 702826 1 Large “L” Bracket 702828 1 Small “L” Bracket 701116 3” x 3/4” x 1/4” Rectangular Spacer 701544 1 3/8-16 x 1 1/4” Flat Socket Cap Screw 701799 1 3/8-16 x 7/8” Button Socket Cap Screw 701122 1 3/8-16 Nylon Stop Nut 701418 1 3/8-16 x 7/8” Flat Socket Cap Screw 701124 1 3/8-16 x 2 1/2” Hex Head Bolt 700268 1 1/2-13 x 3” Socket Set Screw 701126 1 FLEXmount™ Set-up Options Page 4 Desk Edge Clamp Mount Step 1 Drop the nylon stop nut into the impression on the inside of the metal mount column. The rounded top of the nylon stop nut should be facing upwards. Step 2 Position the mount cup, base plate and the large “L” bracket so that the center holes are aligned as shown in the picture on the left. To screw the three parts together use the 3/8-16 x 1” flat head socket cap screw and the 7/32” allen wrench. Insert the 3/8-16 x 1” screw through the counter sunk hole in the large “L” bracket so that it engages the nylon stop nut. Tighten with the 7/32” allen wrench. The assembly is secure when the 3/8” screw no longer turns. Step 3 Align the small “L” bracket with the holes on the side of the large “L” and attach with 3/8-16 x 7/8” Flat Head Socket Cap Screw. Step 4 Line up the center hole on the spacer with the hole in the small “L” bracket; insert the male end of the 3” screw and begin turning it until the spacer touches the bottom of the surface of the desk. FLEXmount™ Set-up Options Page 5 Through-Desk Mount Wall/Reverse Wall Mount Wall mounting hardware is not provided. Step 1 Step 1 Secure the large “L” bracket to a stud in the wall using wood screws. Reverse Wall Mount: Follow Step 1 above; be sure the short side of the “L” bracket is on top. Drill a hole 3/8” into desk or mounting surface bout 1 1/2”-2” in from the edge of the surface edge. Step 2 Remove the backing on the Neoprene foam pad and affix to the bottom of the mount cup. (ONLY if you will not be using the baseplate set-up in the next step) Mounting Hardware Mounting Hardware Reverse Step 3 Line up the mount cup over the hole and drop the 2.5” threaded bolt into the mount cup, through the optional base plate and through the desk. Step 2 Drop the nylon stop nut into the impression inside the mount cup. The rounded top...

Descargar ahora

Introduzca dos números de la imagen: