Votos - 2, Puntuación media: 3
(
)
)
|
Resumen del manual
Select Personal ID using $. Push to O to enter. 3a Select the first of a total of 11 characters (letter, number, + or a blank) by using 4or $. b Push to O to go to the next character. c Repeat a and b for all characters. 4 Store by pressing OK. 5 Press MENU to return to the normal TV screen. Installation Select A-Z, 0-9: Confirm: OK Language/Country Manual Programme Preset Further Programme Preset RGB Set Up Picture Rotation Speaker Configuration Personal ID - - - - - - Presetting and labelling of input sources Using AV Preset you can select the automatic format function and label an input source. 1 Press MENU. Select the symbol using $. Push to O to enter. 2 Select AV Preset using $. Push to O to enter. 3 Select the desired AV input (AV 1, 2 or 3) using 4or $. Push to O enter. After each step you have the choice between memorizing (press OK) or going to the next item (push to O). 4 For automatic format selection of the AV input: a Push to O to select AUTO FORMAT. b Select Off, Normal or Full using 4or $. 5 To label the source: a Push to Oto select Label. b Select the first character using 4or $. Push to Oto confirm. c Repeat step b to select the other 4 characters. d Store by pressing OK. 6 Repeat steps 3 to 5 for the other AV inputs. 7 Selecting the AV3 Input Source: In case of AV3 you have the choice between the top AV3 sockets on the rear of the TV or the rear Scart 3 connector. a Push to $ to select AV3 Input. Push to O to enter. b Select Top or Bottom using 4or $. c Store by pressing OK. 8 Press MENU to return to the normal TV screen. AV Preset Select : Enter: AV 3 Input Rear INPUT LABELAUTO 16:9 VIDEO VIDEO VIDEO On On On AV 1 AV 2 AV 3 AV Preset Select Mode: Confirm: OK AV 3 Input INPUT LABELAUTO 16:9 VIDEO VIDEO VIDEO On On On AV 1 AV 2 AV 3 Front Rear Optional Equipment You can connect a wide range of optional equipment to your TV set. L/G/S/IR/D/D/D R/D D/D L/G S/I 2 S 21 3 S 31 D E F DVD VHS 1 2 G A B C Selecting an input signal In order to get the input signal of a connected equipment onto the TV screen, you need to select the symbol of the connector, to which you have connected the device. 1 Press Erepeatedly on the remote control to select one of the following input modes: Symbol on the screen Input signals from Connector E1 Audio/Video from Scart connector D or* RGB from Scart connector D E2 Audio/Video from Scart connector E or* S-Video from Scart connector E E3 Audio/Video from the phono jacks A and B or from Scart connector F or* S-Video from the 4-pin DIN connector C or from Scart connector F * automatic detection of the signal according to the connected equipment 2 Press ; to return to the normal TV screen. v If the picture or sound is distorted, move the VCR away from the TV set. v When connecting a monaural VCR, connect only the white jack to both the TV set and the VCR. v Connect your DVD-player to Scart 2 Y2/j2 E. v For information on how to select the output signal of the Scart 2 Y2/j2 E, see page 16. Optional Equipment Smartlink Smartlink is a direct link between your TV set and a VCR. For Smartlink you need: • A VCR which supports Smartlink, NexTView Link, Easy Link or Megalogic. • A fully-wired 21-pin SCART cable to connect your VCR to Scart Y2/j2 connector. The features of Smartlink are: • Tuning information such as the channel overview are downloaded from the TV set to the VCR. • With NexTView you can programme your VCR easily. • Direct TV recording: While watching TV you just need to press just one button on the VCR to record this programme. For more information on Smartlink please refer to the Instruction Manual of your VCR. Remote control of other Sony equipment Using the buttons underneath the cover of the remote control you can control other Sony equipment. 1 Open the cover of the remote control. 2 Set the selector VTR 1234 DVD according to the equipment you want to control: VTR 1 Beta VCR VTR 2 8 mm VCR VTR 3 VHS VCR VTR 4 Digital Video (DCR-VX 1000/9000 E, VHR-1000) DVD Digital Video Disk 3 Use the buttons on the remote control to operate the equipment. • If your video equipment has a COMMAND MODE selector, set this selector to the same position as the VTR 1234 DVD selector on the TV remote control. • If the equipment does not have a certain function, the corresponding button on the remote control does not work. Additional Information Specifications Television B/G/H, D/K, I, L system Colour PAL, SECAM, NTSC 3.58/4.43 (via Video In) system Channel See Channel Guide on next page coverage Picture tube FD Trinitron KV-28FC60/28FC60-Z Approx. 71 cm (28 inches) Approx. 66 cm picture measured diagonally 102° deflection KV-32FC60/32FC60-Z Approx. 82 cm (32 inches) Approx. 76 cm picture measured diagonally 102° deflection Sockets (Rear) Y1/ 1: 21-pin scart connector input of audio/video or RGB signals output of TV signals Y2/j2:21-pin scart connector input of audio/video or S-video signals selectable output of audio/video signals Y3/j3:21-pin scart connector input of audio/video...
Otros modelos de este manual:TV - FD Trinitron KV-28FC60 (2.86 mb)
TV - FD Trinitron KV-28FC60-Z (2.86 mb)
TV - FD Trinitron KV-32FC60 (2.86 mb)
TV - FD Trinitron KV-32FC60-Z (2.86 mb)