Votos - 3, Puntuación media: 4.3 ( )

Fabricar: Daewoo Tamaño del archivo: 4.89 mb Nombre del archivo: Idioma del manual:

DISPLAYMODE ZODYNABMICSSAOM OK -26 VIRTUAL DOLBY PICTURE ASPECT DISPLAY MODE DYNAMIC BASS ZOOM OK STILL SOUND MODE DISPLAYMODE DYNAMIC BASS ZOOM OK OK StoreAccessPr Change MENU Exit Manual Tuning Pr 01 Secam-L Press the “. ..VOL. ..” buttons. DISPLAYMODE DYNAMIC BASS ZOOM OK • A tuning screen will appear and cursor will move from left to right / from right to left. If you want to stop tuning press the Menu button. After searching a station, you must press the OK button to store the Program. Searching for channels in the Edit menu You can also search a channel in the Edit menu. DISPLAYMODE DYNAMIC BASS ZOOM OK • Position a selection bar to the PR number you want. • Position the cursor to the Picture with “.VOL.” buttons. • Select the system(PAL or SECAM, SECAM-L) of channel you want to search with the “ЎPR^” buttons. Position the cursor to channel number entry position with “VOL.” button. Search a channel with “ЎPR^” buttons. -27 Fine tuning -If you are unable to get a good picture or sound because of a poor broadcasting signal, it is possible to adjust the Fine tuning. VIRTUAL DOLBY PICTURE ASPECT DISPLAY MODE DYNAMIC BASS ZOOM OK STILL SOUND MODE Move the selection bar to Fine tuning and press the “. ..VOL. ..” buttons to activate Fine tuning up or down. DISPLAYMODE DYNAMIC BASS ZOOM OK AccessPr Change MENU Exit Fine Tuning button is being pressed. Note that if only operates while the DISPLAYMODE ZODYNABMICSAS OMOK “. ..VOL. ..” • The change is memorized automatically. -28 Selection of Input Signal - See 11p for connection method of TV and “Video”. When watching video, Camcorder, DVD, Cable TV Selection of Input Signal - See 11p for connection method of TV and “Video”. When watching video, Camcorder, DVD, Cable TV Press the “ (AV)” button. • Screen changes as follows whenever pressing the “ (AV)” button. PR 19 Clock 12 : 00 Mono PR 19 Component Clock 12 : 00 PR 19 AV1 Clock 12 : 00 PR 19 AV4 Clock 12 : 00 PR 19 AV2 Clock 12 : 00 PR 19 AV3 Clock 12 : 00 PR 19 S-VHS2 Clock 12 : 00 VIRTUAL DOLBY PICTURE ASPECT DISPLAY MODE DYNAMIC BASS ZOOM OK STILL SOUND MODE Notices: Cautions in menu setup • Menu disappears if not operating any button for 10 seconds from the menu. • Don’t connect the composite video signal and S-video signal to the video input terminal AV4 at the same time. If connecting both signals at the same time, the S-video takes precedence. • You can watch only when this input terminal has been be connected to the composite video (generally video) signal. • If sound signal is of mono method, connect it to the L-terminal of the sound input terminal. -29 Screen Adjustment - The user may select various screens designed for a good picture without adjusting the brightness, contrast or colour individually. When setting up various screen modes Screen Adjustment - The user may select various screens designed for a good picture without adjusting the brightness, contrast or colour individually. When setting up various screen modes VIRTUAL DOLBY PICTURE ASPECT DISPLAY MODE DYNAMIC BASS ZOOM OK STILL SOUND MODE Press the “Picture” button. • The screen adjustment status changes as the following screens are displayed sequentially PICTURE whenever pressing the “Picture” button. • The screen automatically changes to the User Screen if adjusting Brightness, Contrast, Sharpness and Colour from individual screen mode. • The screen returns to the mode prior to turning power off when then turning power on again. -30 When adjusting the screen to taste -You can enjoy various screens by adjusting Brightness, Contrast, Colour, Sharpness, etc to the user’s taste. Select “Picture” by pressing the “Menu” button. DISPLAYMODE DYNAMICBASS ZOOM OK • The menu screen appears as follows. Select the item desired to adjust and press the “.VOL.” button. DISPLAYMODE DYNAMICBASS ZOOM OK • Whenever pressing the “ЎPR^” button, you can select in the order of Brightness, Contrast, Colour and Sharpness. • The screen appears as on the right if pressing the “.VOL.” buttons after selecting items desired to adjust with the “ЎPR^” buttons. • You can adjust Brightness by pressing the “.VOL.” button. Position Access MENU Exit Mode Brightness Contrast Colour Sharpness Normal 31 31 31 31 Picture Screen Sound Function Install Position Access MENU Exit Picture Screen Sound Function Install Mode Brightness Contrast Colour Sharpness Normal 16 25 31 31 Adjust Contrast, Colour, and Sharpness in the same manner. Notice Brightness : Adjusts the whole of screen brighter or darker. Contrast : Adjusts difference between brightness and darkness between objects and background on the screen. Colour : Adjusts colour thinly or thickly. Sharpness : Adjusts outline of the screen smoothly or sharply. VIRTUAL DOLBY PICTURE ASPECT DISPLAY MODE DYNAMIC BASS ZOOM OK STILL SOUND MODE -31 Adjustment of Screen Size -Randomly change the size of the screen. Pleasure for enjoying the TV increases further. -The AUTO screen operates when power is turned on firstly. VIRTUAL DOLBY PICT...

Descargar ahora

Introduzca dos números de la imagen: